HARTING 09027646824 DIN 41612 64-Position Backplane Connector Receptacle

Part Overview

The HARTING 09027646824 is a 64-position DIN 41612 Series B backplane connector receptacle with female sockets for through-hole PCB mounting. This component is classified as Active product status and is fully RoHS3 compliant. Alternative equivalent and substitute parts may be required due to design revisions, supply chain considerations, or specific application requirements such as enhanced contact finish specifications or different row configurations.

Substiute Parts

09027646824

HARTINGIn Stock: 97309027646824 Datasheet

Current PartRFQ

DIN-064CSB-S1L-HM

3MIn Stock: 1435DIN-064CSB-S1L-HM Datasheet

MFR RecommendedRFQ

PCN10-64ACS-2.54DSA(72)

Hirose Electric Co LtdIn Stock: 1196PCN10-64ACS-2.54DSA(72) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the HARTING 09027646824 are qualified based on the following electrical and mechanical compatibility criteria:

Primary Substitution Parameters:

• Connector Type: Receptacle, Female Sockets
• Series: DIN 41612
• Pitch: 0.100" (2.54mm)
• Mounting Type: Through Hole
• Termination: Solder
• Operating Temperature Range: Minimum -55°C to 125°C
• Current Rating: Minimum 2A
• Material Flammability Rating: UL94 V-0
• RoHS Compliance: RoHS3 or equivalent

Functional Compatibility: The main part operates with 64 positions in a 2-row Style B configuration. Substitute parts may feature different row configurations (3-row Style C) with higher total position counts but must support loading of 64 positions to maintain functional equivalence. This allows for mechanical and electrical interchangeability in applications requiring 64-position connectivity.

Parameter Comparison

Engineering Selection Recommendations

3M DIN-064CSB-S1L-HM: This substitute part maintains full DIN 41612 Series compatibility with identical pitch and mounting specifications. The 3-row Style C configuration with 96 total positions accommodates 64 loaded positions, providing mechanical and electrical equivalence. The gold contact finish offers enhanced corrosion resistance compared to the base HARTING part. Current rating of 3A exceeds the 2A requirement. Operating temperature range matches the main part specification. RoHS compliance is confirmed. This part is suitable for direct substitution in applications where enhanced contact durability is acceptable.

Hirose PCN10-64ACS-2.54DSA(72): This substitute operates within the PCN10 Series with identical pitch and through-hole mounting. The 3-row configuration with 64 loaded positions provides functional equivalence. Gold contact finish is specified. Current rating matches the 2A requirement. Operating temperature range is limited to -55°C to 85°C, which is narrower than the main part's -55°C to 125°C specification. RoHS3 compliance is confirmed. This part is suitable for substitution in applications where the reduced upper temperature limit does not conflict with system requirements.

Frequently Asked Questions (FAQ)

Q: Can the 3M DIN-064CSB-S1L-HM be used as a direct replacement for the HARTING 09027646824?

A: Yes. Both parts maintain DIN 41612 Series compatibility with identical 0.100" pitch and through-hole solder termination. The 3-row Style C configuration with 64 loaded positions provides mechanical and electrical equivalence. Physical footprint differences due to the additional row must be evaluated against PCB layout constraints.

Q: What is the key difference between the Hirose PCN10-64ACS-2.54DSA(72) and the main HARTING part?

A: The Hirose part operates within a narrower temperature range (-55°C to 85°C versus -55°C to 125°C). All other electrical and mechanical parameters are compatible. Selection depends on whether the application requires operation above 85°C.

Q: Are all substitute parts RoHS compliant?

A: Yes. The 3M part is RoHS Compliant, and the Hirose part is RoHS3 Compliant. Both meet regulatory requirements for lead-free manufacturing.

Q: Does the higher current rating of the 3M part affect compatibility?

A: No. A higher current rating (3A versus 2A) indicates enhanced capability and does not compromise compatibility. The part can safely operate at the 2A requirement of the main part specification.

Q: What packaging considerations apply to these substitute parts?

A: The HARTING main part is supplied in Bulk packaging. The 3M substitute is supplied in Bulk packaging. The Hirose substitute is supplied in Tray packaging. Packaging format may affect handling, storage, and integration into assembly processes.