Molex 0901471313 Equivalent & Substitute Parts

Part Overview

The Molex 0901471313 is a 13-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole PCB mounting with solder termination. This connector features gold-plated mating contacts and tin-plated posts, operating across -55°C to 105°C with a 3A current rating at 350V. The part is active in production and RoHS3 compliant, serving applications in automotive, general purpose, lighting, medical, and telecommunications sectors. Equivalent parts are identified to support design flexibility, supply chain continuity, and application-specific requirements.

Substiute Parts

0901471313

MolexIn Stock: 8910901471313 Datasheet

Current PartRFQ

1-534237-1

TE Connectivity AMP ConnectorsIn Stock: 15711-534237-1 Datasheet

MFR RecommendedRFQ

6-534237-1

TE Connectivity AMP ConnectorsIn Stock: 56086-534237-1 Datasheet

MFR RecommendedRFQ

75915-313LF

Amphenol ICC (FCI)In Stock: 253275915-313LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0901471313 is determined by the following critical parameters:

• 13-position configuration with 0.100" (2.54mm) pitch spacing
• Receptacle connector with female socket contacts
• Through-hole solder termination
• Gold-plated mating contact surface
• Push-pull fastening mechanism
• Square contact geometry with phosphor bronze material
• Board-to-board or board-to-cable mounting style

The three identified substitute parts (TE Connectivity 1-534237-1, TE Connectivity 6-534237-1, and Amphenol ICC 75915-313LF) meet these core electrical and mechanical parameters. Variations in current rating, operating temperature range, RoHS compliance status, and contact finish thickness represent secondary differences that may influence selection based on specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

TE Connectivity 6-534237-1 is the primary substitute for the Molex 0901471313. This part maintains RoHS3 compliance, matches the core electrical and mechanical specifications, and provides an extended operating temperature range (-65°C to 125°C). The AMPMODU Mod IV series offers equivalent board-to-board connectivity with identical pitch and position configuration. Insulation height and contact post length are within acceptable tolerance ranges for direct PCB layout compatibility.

TE Connectivity 1-534237-1 is an alternative substitute with identical electrical and mechanical parameters to the 6-534237-1 variant. However, this part is RoHS non-compliant and carries REACH-affected status, making it unsuitable for applications requiring regulatory compliance with RoHS3 or REACH directives.

Amphenol ICC 75915-313LF (Dubox™ series) serves as a secondary substitute option. This connector maintains RoHS compliance and matches the core 13-position, 0.100" pitch configuration. The thermoplastic glass-filled insulation material differs from the polyester composition of the primary part, and the contact post finish thickness is reduced (78.7µin versus 118.1µin on the original). This part is suitable for applications where the Dubox™ series form factor and material properties align with design requirements.

Current rating differences (2A for TE Connectivity parts versus 3A for the Molex original) must be evaluated against actual circuit requirements. Applications requiring the full 3A rating should retain the Molex 0901471313 or confirm that reduced current capacity is acceptable.

Frequently Asked Questions (FAQ)

Q: Can TE Connectivity 1-534237-1 be used as a direct replacement for the Molex 0901471313?

A: Electrically and mechanically, yes. However, the 1-534237-1 is RoHS non-compliant and REACH-affected. Use this part only in applications where regulatory compliance is not required. For RoHS3-compliant designs, specify TE Connectivity 6-534237-1 instead.

Q: What is the difference between TE Connectivity 1-534237-1 and 6-534237-1?

A: Both parts are AMPMODU Mod IV series with identical electrical and mechanical specifications. The primary differences are RoHS compliance status (1-534237-1 is non-compliant; 6-534237-1 is compliant) and contact post finish composition (Tin-Lead versus Tin). For new designs, 6-534237-1 is the preferred option.

Q: Is the Amphenol ICC 75915-313LF compatible with PCB layouts designed for the Molex 0901471313?

A: Yes, with minor considerations. The 75915-313LF maintains the same 0.100" pitch and 13-position configuration. Insulation height (0.335") and contact post length (0.114") match the original part. The thermoplastic glass-filled insulation material differs from polyester, but this does not affect PCB mounting compatibility. Verify that the reduced contact post finish thickness (78.7µin) meets your application's contact resistance and durability requirements.

Q: Why do the TE Connectivity substitutes have a lower current rating (2A) than the Molex original (3A)?

A: Current rating differences reflect design variations between manufacturers. Confirm that your circuit operates within the 2A limit before substituting with TE Connectivity parts. If 3A capacity is required, retain the Molex 0901471313 or contact the manufacturer for current rating clarification on alternative parts.

Q: Are all substitute parts available in the same packaging format?

A: The Molex 0901471313 packaging is not specified in the provided data. TE Connectivity 1-534237-1, 6-534237-1, and Amphenol ICC 75915-313LF are all supplied in tube packaging. Confirm packaging compatibility with your procurement and assembly processes.

Q: Which substitute part should I specify for a new design requiring RoHS3 compliance?

A: TE Connectivity 6-534237-1 is the recommended choice. This part is RoHS3 compliant, maintains the core electrical and mechanical specifications of the Molex 0901471313, and provides an extended operating temperature range. Amphenol ICC 75915-313LF is also RoHS compliant and serves as a secondary option if Dubox™ series compatibility is required.