Molex 0901471216 Equivalent & Substitute Parts

Part Overview

The Molex 0901471216 is a 16-position receptacle connector with 0.100" (2.54mm) pitch, designed for through-hole PCB mounting with gold-plated mating contacts. This connector operates across -55°C to 105°C with a 3A current rating and 350V voltage rating, serving automotive, general purpose, lighting, medical, and telecommunications applications. The part is active and ROHS3 compliant with unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are identified when core electrical and mechanical parameters align, enabling direct replacement or functional interchangeability in circuit designs where the connector footprint, pitch, contact configuration, and environmental specifications remain compatible.

Substiute Parts

0901471216

MolexIn Stock: 6900901471216 Datasheet

Current PartRFQ

75915-316LF

Amphenol ICC (FCI)In Stock: 158875915-316LF Datasheet

MFR RecommendedRFQ

75915-416LF

Amphenol ICC (FCI)In Stock: 183775915-416LF Datasheet

MFR RecommendedRFQ

76308-116LF

Amphenol ICC (FCI)In Stock: 117376308-116LF Datasheet

MFR RecommendedRFQ

M20-7821646

Harwin Inc.In Stock: 2274M20-7821646 Datasheet

MFR RecommendedRFQ

PPPC161LFBN-RC

Sullins Connector SolutionsIn Stock: 12963PPPC161LFBN-RC Datasheet

MFR RecommendedRFQ

SSW-116-01-F-S

Samtec Inc.In Stock: 1854SSW-116-01-F-S Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment of the following parameters:

• Connector Type & Contact Configuration: Receptacle with female socket contacts
• Position Count & Pitch: 16 positions at 0.100" (2.54mm) mating pitch
• Mounting & Termination: Through-hole PCB mounting with solder termination
• Fastening Mechanism: Push-pull fastening type
• Physical Envelope: Insulation height of 0.335" (8.51mm) and compatible row spacing
• Electrical Ratings: Current and voltage ratings must meet or exceed application requirements
• Environmental Compliance: RoHS and REACH status for regulatory alignment

Substitute parts are grouped into two categories based on contact finish:

Category A - Gold Mating Finish: 75915-316LF, 76308-116LF, SSW-116-01-F-S, PPPC161LFBN-RC Category B - Tin Mating Finish: 75915-416LF, M20-7821646

Parameter Comparison

Engineering Selection Recommendations

Gold Mating Finish Substitutes (75915-316LF, 76308-116LF, SSW-116-01-F-S, PPPC161LFBN-RC): These parts maintain gold contact finish compatibility with the original 0901471216. All are ROHS3 compliant or RoHS compliant. SSW-116-01-F-S provides extended temperature range (-55°C to 125°C) and higher current capacity (4.7A per contact). PPPC161LFBN-RC is classified as a header connector but maintains electrical and mechanical compatibility. 75915-316LF and 76308-116LF are REACH-affected parts; verify regulatory requirements for your application.

Tin Mating Finish Substitutes (75915-416LF, M20-7821646): These parts feature tin mating contact finish, suitable for applications where gold plating is not required. M20-7821646 offers superior voltage rating (1000V) and ROHS3 compliance. Both maintain 3A current capacity and push-pull fastening. M20-7821646 operates at -40°C to 105°C, which is narrower than the original part's -55°C to 105°C range.

Compliance Considerations: All substitute parts are ROHS3 compliant or RoHS compliant. Parts 75915-316LF and 76308-116LF are REACH-affected; parts 75915-416LF, M20-7821646, PPPC161LFBN-RC, and SSW-116-01-F-S are REACH unaffected. Verify REACH compliance requirements for your end application and geographic market.

Frequently Asked Questions (FAQ)

Q: Can I substitute a tin-finish connector for a gold-finish connector? A: Tin and gold finishes have different electrical and corrosion properties. Substitution is possible only if your application does not require the specific corrosion resistance or contact reliability characteristics of gold plating. Verify contact resistance and environmental exposure requirements before substitution.

Q: What is the difference between a receptacle and a header connector? A: Receptacles accept male pins or plugs; headers have protruding pins. PPPC161LFBN-RC is classified as a header but maintains the same 16-position, 0.100" pitch, and female socket contact configuration, making it mechanically and electrically compatible for board-to-board applications.

Q: Are all substitute parts pin-compatible with the original 0901471216? A: Yes. All substitute parts maintain 16 positions at 0.100" (2.54mm) pitch, through-hole solder termination, and push-pull fastening. Physical envelope (insulation height of 0.335") is consistent across all parts, ensuring PCB footprint compatibility.

Q: Which substitute part has the highest current rating? A: SSW-116-01-F-S provides 4.7A per contact, exceeding the original part's 3A rating. This part also offers the widest operating temperature range (-55°C to 125°C).

Q: What is the voltage rating difference between substitutes? A: M20-7821646 provides 1000V, significantly higher than the original 350V rating. PPPC161LFBN-RC is rated at 250V, below the original specification. Verify voltage requirements for your application before substitution.

Q: Are there packaging differences between substitute parts? A: Yes. The original 0901471216 is packaged in tubes. Substitute parts use tube, tray, or bulk packaging. Verify packaging requirements for your procurement and assembly processes.

Q: Which substitute parts are REACH unaffected? A: 75915-416LF, M20-7821646, PPPC161LFBN-RC, and SSW-116-01-F-S are REACH unaffected. 75915-316LF and 76308-116LF are REACH affected; verify compliance for your target market.