Molex 0901471215 Equivalent & Substitute Parts

Part Overview

The Molex 0901471215 is a 15-position receptacle connector with 0.100" (2.54mm) pitch, designed for board-to-board applications. This connector features gold-plated mating contacts, through-hole solder termination, and push-pull fastening. The part is active in production and widely used in automotive, general purpose, lighting, medical, and telecommunications applications. Substitute parts may be required due to inventory constraints, application-specific requirements, or design revisions that permit alternative connector styles or contact finishes.

Substiute Parts

0901471215

MolexIn Stock: 9900901471215 Datasheet

Current PartRFQ

75915-315LF

Amphenol ICC (FCI)In Stock: 193875915-315LF Datasheet

MFR RecommendedRFQ

PPTC151LFBN-RC

Sullins Connector SolutionsIn Stock: 5961PPTC151LFBN-RC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0901471215 is permitted when the following core parameters remain constant:

• 15-position connector configuration
• 0.100" (2.54mm) mating pitch
• Through-hole solder termination
• Push-pull fastening mechanism
• Phosphor bronze contact material
• Single-row layout
• Board-to-board style

Acceptable variations in substitute parts include:

• Contact finish type (gold to tin plating)
• Contact finish thickness
• Insulation material composition (polyester vs. thermoplastic)
• Insulation color
• Connector style (receptacle to header)
• Operating temperature range (provided minimum is maintained)
• Voltage and current ratings (provided ratings meet or exceed application requirements)
• Flammability rating (UL94 V-0 acceptable)
• Packaging format (tube to tray)

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts maintain active production status and comply with RoHS requirements, ensuring long-term availability and regulatory compliance.

The Amphenol ICC 75915-315LF is a direct receptacle-to-receptacle substitute with matching gold mating contact finish. This part maintains electrical and mechanical compatibility with the original Molex design. The primary difference is increased contact finish thickness on mating surfaces (30.0µin vs. 15.0µin), which provides enhanced durability. Voltage and current ratings are not specified in the datasheet; verification against application requirements is necessary before selection.

The Sullins PPTC151LFBN-RC is a header-style connector with tin mating contact finish. This part is suitable for applications where the connector style change from receptacle to header is acceptable. The contact post length is 0.012" (0.30mm) longer than the original part. The voltage rating is 250V, which is lower than the original 350V specification. This part is appropriate for applications with voltage requirements not exceeding 250V.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 75915-315LF be used as a direct replacement for the Molex 0901471215?

A: Yes, the Amphenol ICC 75915-315LF is mechanically and electrically compatible. Both are 15-position receptacles with 0.100" pitch, through-hole solder termination, and push-pull fastening. The gold mating contact finish is identical. Verify that application voltage and current requirements are met, as these ratings are not specified for the Amphenol part.

Q: What is the primary difference between the Molex 0901471215 and the Sullins PPTC151LFBN-RC?

A: The Sullins part is a header connector rather than a receptacle. Headers have protruding pins, while receptacles have recessed sockets. The Sullins part also uses tin mating contact finish instead of gold, and has a lower voltage rating of 250V compared to 350V. Select this part only if your application design accommodates a header connector and operates within the 250V voltage limit.

Q: Are there any temperature range differences between these parts?

A: The Molex part operates from -55°C to 105°C. The Sullins part operates from -40°C to 105°C, providing a narrower low-temperature range. The Amphenol part does not specify an operating temperature range. For applications requiring operation below -40°C, the Molex part is the appropriate choice.

Q: What does the contact finish thickness difference mean for reliability?

A: Contact finish thickness affects wear resistance and long-term reliability. The Amphenol ICC part has thicker gold plating on mating contacts (30.0µin vs. 15.0µin), which generally provides longer contact life under repeated mating cycles. For applications with frequent connector engagement and disengagement, the thicker finish may offer extended service life.

Q: Can I use the Sullins PPTC151LFBN-RC in a high-voltage application rated at 350V?

A: No. The Sullins part is rated for 250V maximum. Using it in a 350V application exceeds its voltage specification and creates a safety and reliability risk. Use the Molex 0901471215 or verify that your application voltage does not exceed 250V before selecting the Sullins part.

Q: What packaging differences exist between these parts?

A: The Molex and Amphenol parts are supplied in tube packaging. The Sullins part is supplied in tray packaging. Tube packaging is typically used for lower-volume orders, while tray packaging is standard for higher-volume production. Verify packaging compatibility with your procurement and assembly processes.