Molex 0901310150 Equivalent & Substitute Parts

Part Overview

The Molex 0901310150 is a vertical rectangular connector header featuring 60 positions across 2 rows with 0.100" (2.54mm) pitch spacing. This through-hole component utilizes solder termination and push-pull fastening, designed for board-to-cable/wire applications in automotive and general-purpose environments. The connector is manufactured from brass contacts with tin finish and polyester glass-filled insulation rated UL94 V-0. As an active product with ROHS3 compliance and unlimited moisture sensitivity rating, substitute parts may be required due to application-specific requirements such as different position counts, pitch variations, contact materials, or fastening mechanisms.

Key Parameters

Parameter	Value
Manufacturer Part Number	0901310150
Manufacturer	Molex
Category	Rectangular Connectors
Connector Type	Header, Breakaway
Contact Type	Male Pin
Number of Positions	60
Number of Rows	2
Pitch - Mating	0.100" (2.54mm)
Row Spacing - Mating	0.100" (2.54mm)
Mounting Type	Through Hole
Termination	Solder
Fastening Type	Push-Pull
Contact Material	Brass
Contact Finish - Mating	Tin
Insulation Material	Polyester, Glass Filled
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0901310150 is determined by the following critical parameters: connector type (header), contact type (male pin), pitch spacing (0.100" / 2.54mm), number of rows (2), mounting method (through hole), termination type (solder), and material flammability compliance (UL94 V-0). Substitute parts are grouped into two categories:

Category A - Direct Position Equivalents: Parts maintaining the same 60-position, 2-row configuration with identical 0.100" pitch and solder termination. These provide pin-for-pin compatibility with potential variations in contact material, finish, or fastening mechanism.

Category B - Functional Equivalents: Parts with different position counts (10, 12, 20, 24, 154 positions) or pitch variations (3.96mm, 4.20mm, 2.00mm) that serve similar board-to-cable/wire connection applications but require circuit redesign or adapter solutions. These are suitable when application constraints necessitate alternative connector geometries.

Category C - Non-Rectangular Alternatives: Modular connectors (RJ45), HDMI receptacles, and quick-connect terminals that address specialized connectivity requirements outside standard rectangular header applications.

Parameter Comparison

Parameter	0901310150 (Main)	TSW-130-24-L-D	TSW-110-24-G-D	87227-6	0901301110
Manufacturer	Molex	Samtec Inc.	Samtec Inc.	TE Connectivity	Molex
Number of Positions	60	60	20	12	10
Number of Rows	2	2	2	2	2
Pitch - Mating	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Connector Type	Header, Breakaway	Header	Header	Header	Header
Contact Type	Male Pin	Male Pin	Male Pin	Male Pin	Male Pin
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole	Through Hole
Termination	Solder	Solder	Solder	Solder	Solder
Fastening Type	Push-Pull	Push-Pull	Push-Pull	Push-Pull	Latch Holder
Contact Material	Brass	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Brass
Contact Finish - Mating	Tin	Gold	Gold	Gold	Tin
Insulation Material	Polyester, Glass Filled	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Thermoplastic	Polyester, Glass Filled
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
Operating Temperature	Not specified	-55°C ~ 125°C	-55°C ~ 125°C	-65°C ~ 105°C	Not specified
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	Not applicable	ROHS3 Compliant
Product Status	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Direct 60-Position Equivalent: The Samtec TSW-130-24-L-D provides the closest functional match to the Molex 0901310150, maintaining identical 60-position, 2-row, 0.100" pitch configuration with through-hole solder termination and push-pull fastening. Both parts are ROHS3 compliant and active products. The TSW-130-24-L-D features phosphor bronze contacts with gold mating finish and operates across -55°C to 125°C, offering enhanced temperature range and contact durability compared to the brass/tin specification of the main part. This substitute is suitable for applications requiring equivalent pin density without circuit modification.

Reduced Position Alternatives: The Samtec TSW-110-24-G-D (20 positions), TE Connectivity 87227-6 (12 positions), and Molex 0901301110 (10 positions) maintain the 0.100" pitch and 2-row configuration but with reduced position counts. These parts are appropriate for applications with lower interconnect density requirements. The TE Connectivity 87227-6 operates at -65°C to 105°C with gold-plated phosphor bronze contacts. The Molex 0901301110 incorporates shrouded 4-wall design with latch holder fastening, providing enhanced mechanical retention compared to push-pull mechanisms.

Compliance Verification: All recommended rectangular connector substitutes maintain UL94 V-0 flammability compliance and ROHS3 certification status, ensuring regulatory alignment with the original specification. Product status confirmation as "Active" across all candidates ensures ongoing manufacturer support and supply chain availability.

Frequently Asked Questions (FAQ)

Q: Can the Samtec TSW-130-24-L-D directly replace the Molex 0901310150 without PCB modification?

A: Yes, the TSW-130-24-L-D maintains identical 60-position, 2-row, 0.100" pitch geometry and through-hole solder termination. Pin-to-pin compatibility is preserved. Mechanical differences include phosphor bronze/gold contacts versus brass/tin and extended operating temperature range (-55°C to 125°C). Verify contact material compatibility with mating connector specifications before implementation.

Q: What is the primary substitution criterion for rectangular header connectors?

A: Pitch spacing (0.100" / 2.54mm), number of positions, row configuration, mounting type (through hole), and termination method (solder) are the primary determinants. The Molex 0901310150 requires substitutes matching these parameters. Contact material and finish variations (brass/tin versus phosphor bronze/gold) are secondary considerations affecting signal integrity and environmental resistance.

Q: Are the reduced-position alternatives (10, 12, 20 positions) suitable for direct substitution?

A: No. Reduced-position parts require circuit redesign and PCB layout modification. These alternatives are applicable only when application constraints permit connector geometry changes. The 10-position Molex 0901301110 and 12-position TE Connectivity 87227-6 maintain 0.100" pitch compatibility but necessitate connector footprint redesign on the host PCB.

Q: What packaging considerations apply to these substitutes?

A: The main part (0901310150) is supplied in bulk packaging. Substitute parts vary: TSW-130-24-L-D and TSW-110-24-G-D are bulk packaged; Molex 0901301110 is tray packaged; TE Connectivity 87227-6 is bulk packaged. Packaging format affects handling, storage, and automated assembly compatibility. Verify packaging requirements with procurement and assembly specifications.

Q: Do all substitutes maintain UL94 V-0 flammability compliance?

A: Yes. All rectangular connector substitutes listed maintain UL94 V-0 material flammability rating. This compliance is consistent across Molex, Samtec, and TE Connectivity products, ensuring regulatory alignment for automotive and general-purpose applications.

Q: What is the significance of contact material differences (brass versus phosphor bronze)?

A: Brass contacts (main part) provide cost-effective general-purpose connectivity. Phosphor bronze contacts (Samtec alternatives) offer superior spring characteristics, wear resistance, and signal integrity over extended mating cycles. Selection depends on application requirements for contact retention force and environmental durability.

Q: Are the modular connector and HDMI alternatives (RJ45, HDMI) suitable substitutes?

A: No. The TE Connectivity 2-5338556-1 (RJ45 modular jack), CNC Tech 2000-1-2-23-00-BK (HDMI receptacle), and Keystone 8282 (quick-connect terminal) serve fundamentally different applications. These are listed as manufacturer-identified alternatives but require complete circuit redesign and are not pin-compatible with the rectangular header configuration.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message