Equivalent & Substitute Parts for Molex 0894010910

Part Overview

The Molex 0894010910 is a rectangular connector header, right-angle configuration, with 9 positions at 2.00mm pitch. This through-hole component features shrouded design with male pin contacts and kinked pin solder termination. The part is classified as obsolete, making equivalent substitutes necessary for ongoing production and maintenance applications. Substitute parts must maintain electrical and mechanical compatibility while meeting current availability and compliance requirements.

Substiute Parts

0894010910

MolexIn Stock: 8990894010910 Datasheet

Current PartRFQ

0532540970

MolexIn Stock: 125390532540970 Datasheet

MFR RecommendedRFQ

440055-9

TE Connectivity AMP ConnectorsIn Stock: 14204440055-9 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters:

• Connector type: Header
• Contact type: Male Pin
• Pitch - Mating: 0.079" (2.00mm)
• Number of positions: 9
• Number of rows: 1
• Mounting type: Through Hole, Right Angle
• Style: Board to Cable/Wire
• Shrouding: Shrouded configuration
• Contact material: Brass
• Contact finish: Tin
• Material flammability rating: UL94 V-0
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

Both substitute parts meet these core criteria. Variations in shrouding wall count (4 wall vs. 3 wall), contact length dimensions, insulation height, and termination method (kinked pin vs. press-fit) are within acceptable tolerance ranges for this connector category and do not prevent functional substitution.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts are active products with current manufacturing support, addressing the obsolescence status of the main part. Selection between the two substitutes should be based on the following factors:

Molex 0532540970 maintains manufacturer continuity with the original part, belonging to the Molex connector portfolio. This part is available in tray packaging and carries ROHS3 compliance with unlimited moisture sensitivity rating.

TE Connectivity 440055-9 offers broader application support across automotive, general purpose, industrial, and medical sectors. This part provides specified electrical ratings (3A current, 250V voltage) and operating temperature range (-25°C ~ 85°C), along with higher contact finish thickness (80.0µin vs. unspecified for the Molex substitute). It is available in bulk packaging.

Both parts meet UL94 V-0 flammability requirements and ROHS3 compliance. The choice between them depends on supply chain preference, packaging requirements, and whether specified electrical ratings are required for the application.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0532540970 directly replace the obsolete 0894010910?

A: Yes. Both parts share identical core specifications: 9-position, 2.00mm pitch, through-hole right-angle header with male pin contacts, brass material, tin finish, and UL94 V-0 rating. The 0532540970 is the manufacturer-recommended substitute.

Q: What is the difference between 4-wall and 3-wall shrouding?

A: Shrouding wall count refers to the number of sides of the connector body that are enclosed. The main part features 4-wall shrouding, while both substitutes feature 3-wall shrouding. This difference does not affect electrical or mechanical compatibility for standard board-to-cable applications.

Q: Are there dimensional compatibility concerns with the substitute parts?

A: Contact length and insulation height vary slightly between parts. The main part has a contact post length of 0.118" (3.00mm) and insulation height of 0.199" (5.05mm). The Molex substitute has 0.138" (4.60mm) post length and 0.165" (4.20mm) insulation height. The TE Connectivity substitute has 0.134" (3.40mm) post length and 0.195" (4.95mm) insulation height. These variations are within acceptable tolerance for through-hole solder applications and do not prevent substitution.

Q: Which substitute offers better electrical specifications?

A: The TE Connectivity 440055-9 provides specified electrical ratings of 3A current and 250V voltage, along with a defined operating temperature range of -25°C ~ 85°C. The Molex 0532540970 does not specify these parameters. If your application requires documented electrical ratings, the TE Connectivity part is the appropriate choice.

Q: What is the difference in termination method between the parts?

A: The main part and Molex substitute use kinked pin solder termination. The TE Connectivity substitute uses press-fit solder termination. Both methods are compatible with standard PCB assembly processes. Press-fit termination may offer improved solder joint reliability in some applications.

Q: Are both substitutes RoHS compliant?

A: Yes. Both the Molex 0532540970 and TE Connectivity 440055-9 are ROHS3 compliant with moisture sensitivity level 1 (unlimited), matching the compliance profile of the original part.

Q: What packaging options are available?

A: The Molex 0532540970 is supplied in tray packaging. The TE Connectivity 440055-9 is supplied in bulk packaging. Packaging selection may depend on production volume and inventory management requirements.