Molex 0878330833 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0878330833 is an active-status rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This 8-position, 2-row connector with 2.00mm pitch serves general purpose, automotive, and telecommunications applications. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when inventory requirements necessitate alternative manufacturers.

Substiute Parts

0878330833

MolexIn Stock: 7300878330833 Datasheet

Current PartRFQ

98464-G61-08LF

Amphenol ICC (FCI)In Stock: 129298464-G61-08LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0878330833 is determined by the following critical parameters:

• Connector Type & Contact Configuration: Header with male pins
• Position Count & Row Configuration: 8 positions arranged in 2 rows
• Pitch Specification: 2.00mm mating pitch and row spacing
• Mounting & Orientation: Through-hole, right-angle mounting
• Shrouding Design: 4-wall shrouded housing
• Termination Method: Solder termination
• Flammability Compliance: UL94 V-0 rating

The substitute part Amphenol ICC (FCI) 98464-G61-08LF meets all critical substitution criteria. Both parts share identical pitch, position count, row configuration, mounting type, shrouding, and termination method. Both maintain UL94 V-0 flammability compliance and MSL 1 moisture sensitivity rating.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0878330833 and Amphenol ICC 98464-G61-08LF maintain active product status and meet applicable compliance requirements. The Molex part carries ROHS3 compliance, while the Amphenol ICC part carries RoHS compliance. Both parts are MSL 1 rated and UL94 V-0 flammable. Selection between these parts should be based on availability, packaging format (Molex supplied in Tube; Amphenol ICC supplied in Bulk), and established supply chain preferences.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 98464-G61-08LF directly replace the Molex 0878330833 in existing designs?

A: Yes. Both connectors share identical mating pitch (2.00mm), position count (8), row configuration (2 rows), mounting type (through-hole right-angle), shrouding design (4-wall), and termination method (solder). Physical and electrical compatibility is established through these matching parameters.

Q: What are the differences in contact specifications between these parts?

A: Contact length specifications differ slightly. The Molex part specifies 0.141" (3.60mm) mating contact length and 0.085" (2.16mm) post length. The Amphenol ICC part specifies 0.157" (4.00mm) mating contact length and 0.098" (2.50mm) post length. Insulation height also differs: Molex 0.248" (6.30mm) versus Amphenol ICC 0.240" (6.10mm). These dimensional variations remain within the functional tolerance of the 2.00mm pitch connector class.

Q: Are there compliance or certification differences?

A: Both parts maintain UL94 V-0 flammability rating and MSL 1 moisture sensitivity. The Molex part is ROHS3 compliant; the Amphenol ICC part is RoHS compliant. Both are EAR99 classified and share the same HTSUS code (8536.69.4040).

Q: What packaging formats are available?

A: The Molex 0878330833 is supplied in Tube packaging. The Amphenol ICC 98464-G61-08LF is supplied in Bulk packaging. Packaging selection may affect procurement lead times and minimum order quantities.

Q: Are there fastening type differences?

A: Yes. The Molex part uses Push-Pull fastening, while the Amphenol ICC part uses Latch Holder fastening. Both fastening types are compatible with the 2.00mm pitch, 8-position, 2-row connector architecture.