Molex 0878330621 Equivalent & Substitute Parts

Part Overview

The Molex 0878330621 is an active rectangular connector header designed for through-hole, right-angle board-to-board or cable applications. This shrouded 6-position connector operates across -55°C to 105°C and is widely used in automotive, general purpose, and telecommunications applications. Finding equivalent parts may be necessary due to inventory constraints, lead time requirements, or design flexibility needs while maintaining electrical and mechanical compatibility.

Substiute Parts

0878330621

MolexIn Stock: 10620878330621 Datasheet

Current PartRFQ

98464-G61-06LF

Amphenol ICC (FCI)In Stock: 77098464-G61-06LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0878330621 is determined by strict alignment of the following critical parameters:

• Pitch - Mating: 0.079" (2.00mm) — must match exactly for mechanical compatibility
• Number of Positions: 6 — connector must accommodate identical pin count
• Number of Rows: 2 — row configuration must be identical
• Row Spacing - Mating: 0.079" (2.00mm) — must match for proper mating alignment
• Mounting Type: Through Hole, Right Angle — orientation and installation method must be identical
• Shrouding: Shrouded - 4 Wall — physical form factor must match
• Termination: Solder — connection method must be identical
• Contact Type: Male Pin — gender must match
• Material Flammability Rating: UL94 V-0 — safety compliance must be maintained or exceeded

The Amphenol ICC (FCI) 98464-G61-06LF meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0878330621 and Amphenol ICC 98464-G61-06LF are active products with identical critical mechanical and electrical parameters. Selection between these parts should be based on:

• Inventory Availability: Molex 0878330621 has 1002 units in stock; Amphenol ICC 98464-G61-06LF has 720 units in stock
• Packaging Format: Molex is supplied in Tube packaging; Amphenol ICC is supplied in Bulk packaging
• Compliance Status: Both meet UL94 V-0 flammability requirements and MSL 1 moisture sensitivity levels. Molex is ROHS3 Compliant; Amphenol ICC is RoHS Compliant. Molex is REACH Unaffected; Amphenol ICC is REACH Affected
• Contact Finish Enhancement: Amphenol ICC features GXT™ gold plating on mating contacts, which may provide enhanced corrosion resistance in specific applications

Both parts are suitable for automotive, general purpose, and telecommunications applications where 2.00mm pitch, 6-position, right-angle through-hole headers are required.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC 98464-G61-06LF be used as a direct replacement for the Molex 0878330621?

A: Yes. Both connectors share identical pitch (0.079" / 2.00mm), position count (6), row configuration (2 rows), row spacing, mounting type (through-hole right-angle), shrouding (4-wall), and termination method (solder). Both meet UL94 V-0 flammability and MSL 1 requirements.

Q: What are the key differences between these two parts?

A: The primary differences are manufacturer series designation (Milli-Grid 87833 vs. Minitek® 2.00mm), insulation material composition (glass-filled polyamide vs. thermoplastic), contact finish enhancement (standard gold vs. GXT™ gold), fastening type (push-pull vs. latch holder), and packaging format (tube vs. bulk). Electrical and mechanical compatibility remains unchanged.

Q: Are there any temperature rating differences?

A: The Molex 0878330621 specifies an operating temperature range of -55°C to 105°C. The Amphenol ICC 98464-G61-06LF does not provide an operating temperature specification in the available data. For applications requiring confirmed temperature performance, the Molex part provides explicit documentation.

Q: What does the GXT™ gold finish on the Amphenol ICC part mean?

A: GXT™ is Amphenol's proprietary gold plating specification. Both parts use gold mating contact finishes at 30.0µin (0.76µm) thickness. The GXT™ designation indicates Amphenol's specific plating process and quality standard.

Q: Does packaging format affect compatibility?

A: No. Tube and Bulk packaging formats do not affect electrical or mechanical compatibility. Packaging selection depends on inventory management, handling procedures, and supply chain requirements.

Q: Are both parts RoHS compliant?

A: Yes. The Molex 0878330621 is ROHS3 Compliant. The Amphenol ICC 98464-G61-06LF is RoHS Compliant. Both meet RoHS requirements; the Molex part meets the more recent ROHS3 standard.