Molex 0873814484 Equivalent & Substitute Parts

Part Overview

The Molex 0873814484 is a 44-position receptacle connector from the Milli-Grid 87381 series, designed for board-to-board applications with surface mount termination. This connector features a 0.079" (2.00mm) pitch, gold-plated mating contacts, and push-pull fastening. The part is active in production with 1164 units currently in stock. Equivalent parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or specific application needs while maintaining electrical and mechanical compatibility.

Substiute Parts

0873814484

MolexIn Stock: 12460873814484 Datasheet

Current PartRFQ

MMS-122-02-F-DV

Samtec Inc.In Stock: 644MMS-122-02-F-DV Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0873814484 is determined by strict alignment with the following critical parameters:

• Connector Configuration: 44-position receptacle with 2-row arrangement
• Pitch Specification: 0.079" (2.00mm) mating pitch and row spacing
• Mounting Technology: Surface mount with solder termination
• Fastening Mechanism: Push-pull engagement system
• Contact Interface: Gold-plated mating surface with female socket configuration
• Physical Envelope: 0.177" (4.50mm) insulation height
• Electrical Performance: Minimum voltage rating of 125V and current capacity of 1.9A per contact
• Regulatory Compliance: ROHS3 compliance and MSL 1 rating

The Samtec MMS-122-02-F-DV meets these substitution criteria through identical mechanical and electrical specifications across all critical parameters.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0873814484 and Samtec MMS-122-02-F-DV connectors are active production parts with ROHS3 compliance and MSL 1 ratings. The Samtec alternative provides an extended operating temperature range to -55°C ~ 125°C and higher current capacity at 3.9A per contact, compared to the Molex specification of 1.9A. Both parts maintain identical mechanical interfaces, pitch specifications, and push-pull fastening systems, ensuring direct board-level compatibility. Selection between these parts should be based on inventory availability and specific application thermal or current requirements within the stated operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the Samtec MMS-122-02-F-DV be used as a direct replacement for the Molex 0873814484?

A: Yes. Both connectors share identical mechanical specifications including 44-position configuration, 0.079" (2.00mm) pitch, 2-row arrangement, surface mount technology, and push-pull fastening. The physical footprint and mating interface are compatible for direct board-level substitution.

Q: What are the key differences between these two parts?

A: The Samtec part offers an extended operating temperature range (-55°C ~ 125°C versus -55°C ~ 105°C) and higher current rating (3.9A per contact versus 1.9A). Both maintain identical electrical and mechanical interfaces for the connector body and contact arrangement.

Q: Are both parts compliant with industry standards?

A: Both the Molex 0873814484 and Samtec MMS-122-02-F-DV are ROHS3 compliant with MSL 1 moisture sensitivity ratings, suitable for standard PCB assembly and storage conditions without special handling requirements.

Q: Does pitch compatibility guarantee mechanical fit?

A: Pitch compatibility combined with identical row spacing, insulation height, and push-pull fastening mechanism ensures mechanical fit. Both parts maintain the same 0.079" (2.00mm) mating pitch and 0.177" (4.50mm) insulation height for direct board compatibility.

Q: What packaging format is available for both parts?

A: Both connectors are supplied in tube packaging suitable for automated pick-and-place assembly processes.