Molex 0850520658 96-Position DIN Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0850520658 is a 96-position DIN receptacle connector with female sockets, gold-plated contacts, and right-angle through-hole mounting. This connector is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance, repairs, and legacy equipment support. The part operates across the industrial temperature range of -55°C to 125°C and is RoHS3 compliant with UL94 V-0 flammability rating.

Substiute Parts

0850520658

MolexIn Stock: 7120850520658 Datasheet

Current PartRFQ

09732326801

HARTINGIn Stock: 135809732326801 Datasheet

DirectRFQ

86094328813768V1LF

Amphenol ICC (FCI)In Stock: 86386094328813768V1LF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Molex 0850520658 are qualified based on strict electrical and mechanical parameter alignment. The following parameters determine substitution eligibility:

• Connector Type: Receptacle, Female Sockets (must match)
• Number of Positions: 96 (must match)
• Number of Positions Loaded: 32 (must match)
• Pitch: 0.100" (2.54mm) (must match)
• Number of Rows: 3 (must match)
• Style: R - Right Angle (must match)
• Mounting Type: Through Hole, Right Angle (must match)
• Termination: Solder (must match)
• Contact Finish: Gold (must match)
• Operating Temperature Range: -55°C to 125°C (must match or exceed)
• Material Flammability Rating: UL94 V-0 (must match)
• RoHS Compliance: RoHS3 or equivalent (must match)

Two substitute parts meet these criteria and are listed below.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts satisfy the mandatory electrical and mechanical parameters for direct substitution with the Molex 0850520658.

HARTING 09732326801 is an active product with RoHS3 compliance, UL94 V-0 flammability rating, and a current rating of 2A. The insulation material is polybutylene terephthalate (PBT) glass-filled, which differs from the original polyester thermoplastic. This part is available in bulk packaging with 1257 units in stock.

Amphenol ICC 86094328813768V1LF is an active product with RoHS compliance and UL94 V-0 flammability rating. The insulation material matches the original polyester thermoplastic composition. Current rating is specified at 1.5A. This part is available in tray packaging with 808 units in stock. REACH status is listed as affected.

Both parts maintain the same connector geometry, pitch, row configuration, and thermal operating range as the original Molex part. Selection between these substitutes depends on specific application requirements regarding current capacity, insulation material properties, and packaging format.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09732326801 or Amphenol ICC 86094328813768V1LF be used as direct replacements for Molex 0850520658?

A: Yes. Both substitute parts match all critical electrical and mechanical parameters: 96-position configuration, 0.100" pitch, 3-row layout, right-angle through-hole mounting, gold-plated contacts, solder termination, and -55°C to 125°C operating temperature range. Both maintain UL94 V-0 flammability compliance and RoHS compliance status.

Q: What is the difference in current rating between the substitute parts?

A: HARTING 09732326801 is rated for 2A, while Amphenol ICC 86094328813768V1LF is rated for 1.5A. The original Molex part does not specify a current rating. Application current requirements should determine which substitute is appropriate.

Q: Do the insulation materials differ between the parts?

A: Yes. The original Molex 0850520658 and Amphenol ICC 86094328813768V1LF both use polyester thermoplastic insulation. HARTING 09732326801 uses polybutylene terephthalate (PBT) glass-filled insulation, which offers different mechanical and thermal properties. Material selection should align with specific environmental and mechanical stress conditions.

Q: Are there packaging differences between the substitute parts?

A: Yes. HARTING 09732326801 is supplied in bulk packaging, while Amphenol ICC 86094328813768V1LF is supplied in tray packaging. Packaging format may affect handling, storage, and integration into assembly processes.

Q: What is the significance of the product status difference?

A: The original Molex 0850520658 is classified as obsolete, meaning it is no longer manufactured. Both substitute parts are active products currently in production, ensuring long-term availability for future orders and system maintenance.

Q: Are both substitute parts RoHS compliant?

A: Yes. HARTING 09732326801 is RoHS3 compliant. Amphenol ICC 86094328813768V1LF is RoHS compliant. Both meet regulatory requirements for hazardous substance restrictions.