Molex 0850037005 96-Position DIN Connector Header — Equivalent & Substitute Parts

Part Overview

The Molex 0850037005 is a 96-position DIN connector header designed for backplane applications. This component features male pins with gold plating, right-angle through-hole mounting, and a 0.100" (2.54mm) pitch configuration across three rows in Style C. The part is classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing system support and new design implementations.

Key Parameters

Parameter	Value
Manufacturer Part Number	0850037005
Manufacturer	Molex
Category	Backplane Connectors
Connector Type	Header, Male Pins
Number of Positions	96
Pitch	0.100" (2.54mm)
Number of Rows	3
Style	C
Mounting Type	Through Hole, Right Angle
Contact Finish	Gold
Termination	Solder
Operating Temperature Range	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0850037005 is determined by strict alignment with the following core parameters:

96 positions with all positions loaded
0.100" (2.54mm) pitch spacing
3-row configuration in Style C
Male pin header connector type
Right-angle through-hole mounting
Solder termination
Gold contact finish
UL94 V-0 flammability rating
ROHS3 compliance
Unlimited moisture sensitivity level (MSL 1)

The substitute parts listed below meet these core electrical and mechanical requirements. Variations in contact finish thickness, insulation material composition, and operating temperature ranges are noted but do not preclude functional equivalence within the specified parameter set.

Parameter Comparison

Parameter	Molex 0850037005	HARTING 09033966919	HARTING 09033967921	Hirose PCN10-96P-2.54DS(77)
Connector Type	Header, Male Pins	Header, Male Pins	Header, Male Pins	Header, Male Pins
Number of Positions	96	96	96	96
Positions Loaded	All	All	All	All
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)	0.100" (2.54mm)
Number of Rows	3	3	3	3
Style	C	C	C	Not specified
Mounting Type	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle	Through Hole, Right Angle
Termination	Solder	Solder	Solder	Solder
Contact Finish	Gold	Not specified	Gold	Gold
Material Flammability Rating	UL94 V-0	UL94 V-0	UL94 V-0	UL94 V-0
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	RoHS Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Obsolete	Active	Active	Last Time Buy

Engineering Selection Recommendations

HARTING 09033967921 is the primary substitute for the Molex 0850037005. This part maintains active product status, carries ROHS3 compliance certification, and provides gold contact finish with flash thickness. The DIN 41612 series designation confirms mechanical and electrical compatibility. The inclusion of mounting clips provides enhanced mechanical stability in backplane applications.

HARTING 09033966919 serves as a secondary substitute when gold contact finish is not a critical requirement. This part is active and ROHS3 compliant but does not specify contact finish material. It includes mounting clips and is suitable for applications where contact finish material is not performance-limiting.

Hirose PCN10-96P-2.54DS(77) is available as a tertiary option with active Last Time Buy status. This part meets all core mechanical and electrical parameters with gold contact finish and RoHS compliance. The operating temperature range (-55°C ~ 85°C) is narrower than the original Molex specification (-55°C ~ 125°C), requiring thermal environment verification before selection. Current rating is specified at 2A.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09033966919 be used as a direct replacement for the Molex 0850037005?

A: HARTING 09033966919 meets all core mechanical and electrical parameters: 96 positions, 0.100" pitch, 3-row Style C configuration, right-angle through-hole mounting, and solder termination. The primary difference is unspecified contact finish material. If gold plating is functionally required, HARTING 09033967921 is the appropriate selection.

Q: What is the significance of the mounting clips feature on HARTING parts?

A: Mounting clips are mechanical retention features that enhance board-level stability during insertion and removal cycles. This feature does not affect electrical compatibility but improves mechanical robustness in high-vibration or high-cycle applications.

Q: Is the Hirose PCN10-96P-2.54DS(77) suitable for all operating environments?

A: The Hirose part specifies an operating temperature range of -55°C ~ 85°C, which is narrower than the original Molex specification of -55°C ~ 125°C. Applications requiring operation above 85°C require alternative selection or thermal environment verification.

Q: Are all substitute parts ROHS compliant?

A: HARTING 09033966919 and 09033967921 are ROHS3 compliant. Hirose PCN10-96P-2.54DS(77) is RoHS compliant. Both certifications meet regulatory requirements for electronic component use in applicable markets.

Q: What packaging formats are available for these substitute parts?

A: HARTING parts are supplied in bulk packaging. Hirose PCN10-96P-2.54DS(77) is supplied in tray packaging. Packaging format selection depends on assembly process requirements and inventory management protocols.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message