Molex 0850030567 96-Position DIN Connector Header Equivalent & Substitute Parts

Part Overview

The Molex 0850030567 is a 96-position DIN connector header with male pins, gold plating, and right-angle through-hole mounting. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing system maintenance and new design implementations. The connector follows DIN 41612 standards and is commonly used in backplane and Eurocard applications requiring high-density interconnection.

Key Parameters

Parameter	Value
Manufacturer Part Number	0850030567
Manufacturer	Molex
Category	Backplane Connectors
Number of Positions	96
Pitch	0.100" (2.54mm)
Number of Rows	3
Style	C
Connector Type	Header, Male Pins
Mounting Type	Through Hole, Right Angle
Termination	Solder
Contact Finish	Gold
Operating Temperature Range	-55°C to 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0850030567 is determined by the following critical parameters:

Primary Matching Criteria:

96 positions with 3-row configuration
0.100" (2.54mm) pitch
DIN 41612 Style C connector
Through-hole, right-angle mounting
Solder termination
UL94 V-0 flammability rating
MSL 1 (Unlimited) moisture sensitivity

Secondary Compatibility Factors:

Connector type (Header vs. Plug configuration)
Contact finish (Gold preferred for signal integrity)
Operating temperature range (-55°C to 125°C baseline)
RoHS and REACH compliance status

Substitute parts are grouped into two categories: direct header equivalents from HARTING and Hirose, and functionally compatible plug connectors from TE Connectivity. Header-to-header substitution maintains identical form factor and mounting characteristics. Plug connectors represent mating pair alternatives where system architecture permits receptacle-to-plug interface conversion.

Parameter Comparison

Part Number	Manufacturer	Connector Type	Positions	Pitch	Rows	Style	Mount Type	Contact Finish	Temp Range	RoHS Status	Product Status
0850030567	Molex	Header, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Gold	-55°C to 125°C	ROHS3 Compliant	Obsolete
09031965921	HARTING	Header, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Not Specified	-55°C to 125°C	ROHS3 Compliant	Active
09033962921	HARTING	Header, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Not Specified	-55°C to 125°C	ROHS3 Compliant	Active
09033966919	HARTING	Header, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Not Specified	Not Specified	ROHS3 Compliant	Active
5650947-5	TE Connectivity AMP	Plug, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Gold	-55°C to 125°C	RoHS Compliant	Active
650947-5	TE Connectivity AMP	Plug, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Gold	-55°C to 125°C	RoHS Non-Compliant	Active
PCN10-96P-2.54DS(77)	Hirose Electric	Header, Male Pins	96	0.100" (2.54mm)	3	Not Specified	Through Hole, RA	Gold	-55°C to 85°C	RoHS Compliant	Last Time Buy
PCN10EA-96P-2.54DS(72)	Hirose Electric	Header, Male Pins	96	0.100" (2.54mm)	3	C	Through Hole, RA	Gold	-55°C to 85°C	RoHS Compliant	Active

Engineering Selection Recommendations

Primary Substitutes (Active Status, Full Compliance):

HARTING 09031965921 and 09033962921 are the preferred direct substitutes. Both are active production parts with ROHS3 compliance matching the original specification. HARTING 09033962921 includes board lock features and specified current rating of 2A, providing enhanced mechanical retention for high-vibration environments. HARTING 09033966919 remains compatible but lacks specified operating temperature range documentation.

Secondary Substitutes (Active Status, Compliance Considerations):

TE Connectivity 5650947-5 is an active Eurocard series plug connector with gold plating and full temperature range coverage (-55°C to 125°C). This part maintains RoHS compliance and represents a mating pair alternative where system architecture supports plug-to-header interface conversion. TE Connectivity 650947-5 shares identical electrical and mechanical specifications but carries RoHS non-compliance and REACH-affected status, limiting suitability for new designs subject to environmental regulations.

Alternative Consideration (Limited Production):

Hirose PCN10EA-96P-2.54DS(72) is an active production header with gold plating, board lock features, and Style C configuration. Operating temperature range is restricted to -55°C to 85°C, requiring thermal verification for applications exceeding 85°C. Hirose PCN10-96P-2.54DS(77) is classified as Last Time Buy, indicating discontinued production and limited future availability.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09033962921 directly replace Molex 0850030567 in existing designs?

A: Yes. Both connectors share identical 96-position, 3-row, 0.100" pitch DIN 41612 Style C configuration with through-hole right-angle mounting. HARTING 09033962921 includes board lock features not present in the original, providing additional mechanical stability. Verify PCB footprint compatibility before implementation.

Q: What is the difference between HARTING 09031965921 and 09033962921?

A: HARTING 09033962921 includes board lock features and specifies 2A current rating with Level/Class 1 designation. HARTING 09031965921 omits board lock and carries Level/Class 2 designation. Both maintain identical pitch, position count, and mounting characteristics. Selection depends on mechanical retention requirements and current handling specifications for your application.

Q: Why are TE Connectivity plug connectors listed as substitutes for a header connector?

A: TE Connectivity 5650947-5 and 650947-5 are plug connectors (mating pairs) rather than headers. These represent functional alternatives only where system architecture permits receptacle-to-plug interface conversion. They maintain identical 96-position, 3-row, 0.100" pitch configuration and DIN 41612 Style C compliance. Direct header-to-header substitution is not possible with plug connectors.

Q: Is Hirose PCN10-96P-2.54DS(77) suitable for new production designs?

A: No. This part is classified as Last Time Buy, indicating discontinued production. While electrically and mechanically compatible, limited future availability makes it unsuitable for new designs requiring long-term component supply. Use Hirose PCN10EA-96P-2.54DS(72) for active production requirements.

Q: What is the impact of the reduced operating temperature range in Hirose connectors?

A: Hirose PCN10-96P-2.54DS(77) and PCN10EA-96P-2.54DS(72) specify -55°C to 85°C operating range, compared to the original Molex specification of -55°C to 125°C. Applications requiring operation above 85°C must use HARTING or TE Connectivity alternatives. Verify thermal requirements before selecting Hirose substitutes.

Q: Does TE Connectivity 650947-5 meet current environmental compliance requirements?

A: No. TE Connectivity 650947-5 is RoHS non-compliant and REACH-affected. Use TE Connectivity 5650947-5 instead, which maintains RoHS compliance. For new designs subject to environmental regulations, HARTING or Hirose alternatives are recommended.

Q: Are gold-plated contacts required for this application?

A: Contact finish is not specified for HARTING substitutes. If gold plating is critical for signal integrity or corrosion resistance, confirm finish specifications with the manufacturer. TE Connectivity 5650947-5 and Hirose alternatives explicitly specify gold plating, matching the original Molex specification.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message