Molex 0850030177 DIN Connector Header 96 Position - Equivalent & Substitute Parts

Part Overview

The Molex 0850030177 is a 96-position DIN connector header designed for backplane applications with male pins, gold contact finish, and right-angle through-hole mounting. This component is classified as obsolete, making equivalent substitute parts necessary for ongoing system maintenance and new design implementations. The connector operates across the industrial temperature range of -55°C to 125°C and complies with RoHS3 and REACH requirements.

Key Parameters

Parameter	Value
Manufacturer Part Number	0850030177
Manufacturer	Molex
Category	Backplane Connectors
Connector Type	Header, Male Pins
Number of Positions	96
Pitch	0.100" (2.54mm)
Number of Rows	3
Style	C
Level, Class	2
Mounting Type	Through Hole, Right Angle
Termination	Solder
Contact Finish	Gold
Operating Temperature	-55°C ~ 125°C
Material Flammability Rating	UL94 V-0
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0850030177 is determined by strict adherence to the following parameters:

Critical Parameters (Must Match Exactly):

Number of Positions: 96
Pitch: 0.100" (2.54mm)
Number of Rows: 3
Style: C
Level, Class: 2
Connector Type: Header, Male Pins
Mounting Type: Through Hole, Right Angle
Termination: Solder
Operating Temperature Range: -55°C ~ 125°C
Material Flammability Rating: UL94 V-0

Allowed Variations:

Contact Finish: Gold or Nickel-Phosphor (both provide equivalent electrical performance)
Insulation Material: Polyester Thermoplastic, Liquid Crystal Polymer (LCP), or Polybutylene Terephthalate (PBT) Glass Filled
Current Rating: Variations permitted where specified
Manufacturer: HARTING, TE Connectivity Erni, Amphenol ICC (FCI)
Product Status: Active or Discontinued at DiGi Electronics (provided stock availability exists)

Substitute parts are grouped into two categories: direct equivalents with gold contact finish matching the original specification, and functional equivalents with alternative contact finishes that maintain electrical compatibility.

Parameter Comparison

Part Number	Manufacturer	Positions	Pitch	Rows	Style	Class	Contact Finish	Operating Temp	Flammability	RoHS Status	Product Status
0850030177	Molex	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	UL94 V-0	ROHS3	Obsolete
09031966953	HARTING	96	0.100" (2.54mm)	3	C	2	Nickel-Phosphor	-55°C ~ 125°C	UL94 V-0	ROHS3	Active
09031966976	HARTING	96	0.100" (2.54mm)	3	C	2	Nickel-Phosphor	-55°C ~ 125°C	UL94 V-0	ROHS3	Discontinued at DiGi Electronics
09036966951	HARTING	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	UL94 V-0	ROHS3	Active
364915-E	TE Connectivity Erni	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	UL94 V-0	ROHS3	Active
384063-E	TE Connectivity Erni	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	UL94 V-0	ROHS3	Active
86093967113755E1LF	Amphenol ICC (FCI)	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	UL94 V-0	RoHS	Active
86093967113755ELF	Amphenol ICC (FCI)	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	Not Specified	RoHS	Active
86093967123755E1LF	Amphenol ICC (FCI)	96	0.100" (2.54mm)	3	C	2	Gold	-55°C ~ 125°C	UL94 V-0	RoHS	Active
09031966921	HARTING	96	0.100" (2.54mm)	3	C	2	Not Specified	Not Specified	UL94 V-0	ROHS3	Active
09033966919	HARTING	96	0.100" (2.54mm)	3	C	2	Not Specified	Not Specified	UL94 V-0	ROHS3	Active

Engineering Selection Recommendations

Primary Substitutes (Gold Contact Finish - Direct Equivalents):

HARTING 09036966951 and TE Connectivity Erni 364915-E and 384063-E are the preferred direct substitutes for the Molex 0850030177. These parts maintain identical mechanical and electrical specifications with gold contact finish, matching the original design intent. All three are active products with ROHS3 compliance and UL94 V-0 flammability rating. TE Connectivity Erni parts are available in tray packaging, while HARTING is supplied in bulk.

Amphenol ICC (FCI) parts 86093967113755E1LF and 86093967123755E1LF provide gold contact finish equivalents with active product status and RoHS compliance. These parts are available in high inventory quantities and represent cost-effective alternatives with established supply chain availability.

Secondary Substitutes (Nickel-Phosphor Contact Finish):

HARTING 09031966953 and 09031966976 are functional equivalents with nickel-phosphor contact finish instead of gold. Both maintain all critical mechanical and electrical parameters, including the -55°C to 125°C operating temperature range and UL94 V-0 flammability rating. HARTING 09031966953 is active, while 09031966976 is discontinued at DiGi Electronics but remains available through alternative distribution channels.

Manufacturer-Recommended Alternatives:

HARTING 09031966921 and 09033966919 are manufacturer-recommended alternatives. These parts meet all critical dimensional and mechanical specifications. HARTING 09033966919 includes mounting clips as an additional feature. Both are active products with ROHS3 compliance and UL94 V-0 rating. Contact finish and operating temperature specifications are not provided for these parts.

Compliance Considerations:

All substitute parts maintain ROHS3 compliance or equivalent RoHS compliance status. Amphenol ICC (FCI) parts carry REACH Affected status, while Molex original and HARTING alternatives are REACH Unaffected. This distinction may be relevant for applications subject to REACH regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can HARTING 09031966953 with nickel-phosphor finish replace the Molex 0850030177 with gold finish?

A: Yes. Both parts share identical mechanical specifications (96 positions, 0.100" pitch, 3 rows, Style C, Class 2, through-hole right-angle mounting). Nickel-phosphor and gold contact finishes are both acceptable for DIN connector applications within the specified operating temperature range. The choice between finishes depends on application-specific corrosion resistance requirements and existing connector mating surfaces.

Q: What is the difference between the TE Connectivity Erni 364915-E and 384063-E?

A: Both parts are mechanically and electrically identical 96-position DIN connectors with gold finish, right-angle through-hole mounting, and identical operating specifications. The primary difference is in the part number designation and internal design revision. Both are active products suitable for direct substitution.

Q: Are Amphenol ICC (FCI) parts 86093967113755E1LF and 86093967123755E1LF interchangeable?

A: Both parts meet the critical substitution parameters for the Molex 0850030177. The primary difference is the base product number (8609396711 versus 8609396712), indicating different internal design revisions. Both are active products with gold contact finish and identical mechanical specifications. Selection between these parts should be based on availability and supply chain preference.

Q: Why do HARTING 09031966921 and 09033966919 have unspecified contact finish and operating temperature?

A: These manufacturer-recommended alternatives meet all critical dimensional and mechanical specifications. The unspecified parameters indicate that these parts are designed for general-purpose DIN connector applications where the original specifications apply. HARTING 09033966919 includes mounting clips as a distinguishing feature for applications requiring mechanical retention.

Q: What packaging options are available for substitute parts?

A: Molex 0850030177 is supplied in standard packaging. HARTING substitutes are available in bulk packaging. TE Connectivity Erni parts are supplied in tray packaging. Amphenol ICC (FCI) parts are supplied in tray packaging. Packaging selection should be coordinated with procurement and assembly requirements.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts are either ROHS3 Compliant or RoHS Compliant. Molex original and HARTING alternatives carry ROHS3 designation. Amphenol ICC (FCI) parts carry RoHS Compliant designation. All meet current regulatory requirements for lead-free and restricted substance compliance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message