0830CDMCCDS-150MC Equivalent & Substitute Parts

Part Overview

The 0830CDMCCDS-150MC is a 15 µH shielded molded inductor manufactured by Sumida America Components Inc., rated for 3.6 A continuous current with a maximum DC resistance of 100mOhm. This component is designed for surface mount applications in power conversion, filtering, and energy storage circuits. The part maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the specified parameter tolerances.

Substiute Parts

0830CDMCCDS-150MC

Sumida America Components Inc.In Stock: 10720830CDMCCDS-150MC Datasheet

Current PartRFQ

IHLP3232CZER150M11

Vishay DaleIn Stock: 1207IHLP3232CZER150M11 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The IHLP3232CZER150M11 from Vishay Dale qualifies as a direct substitute based on the following critical parameters:

Matching Electrical Specifications:

• Inductance value: 15 µH (identical)
• Inductance tolerance: ±20% (identical)
• Operating temperature range: -55°C to 125°C (identical)
• Shielding type: Shielded (identical)
• Test frequency: 100 kHz (identical)

Compatible Performance Characteristics:

• Current rating: 4.3 A (exceeds 3.6 A requirement)
• DC resistance: 85.3mOhm Max (lower than 100mOhm maximum, improving efficiency)
• Saturation current: 3.8 A (supports the operating envelope)

Mechanical and Compliance Alignment:

• Mounting type: Surface Mount (identical)
• Height seated: 0.118" / 3.00mm (identical)
• RoHS3 compliance: Confirmed
• MSL rating: 1 (Unlimited) (identical)
• ECCN classification: EAR99 (identical)

The substitute part maintains functional equivalence while offering improved current handling and reduced resistive losses.

Parameter Comparison

Engineering Selection Recommendations

Both the 0830CDMCCDS-150MC and IHLP3232CZER150M11 maintain active product status with full regulatory compliance. Selection between these parts should be based on:

Primary Considerations:

• Availability and lead time requirements
• PCB layout constraints (both parts share identical height and similar footprint dimensions)
• Thermal management needs (the Vishay part offers lower DC resistance, reducing I²R losses)
• Supply chain continuity and preferred vendor relationships

Compliance Verification: Both parts carry ROHS3 certification, EAR99 export classification, and unlimited moisture sensitivity rating, confirming suitability for equivalent applications without additional qualification.

Frequently Asked Questions (FAQ)

Q: Can the IHLP3232CZER150M11 directly replace the 0830CDMCCDS-150MC in existing designs?

A: Yes. Both parts share identical inductance (15 µH), tolerance (±20%), operating temperature range (-55°C to 125°C), shielding type, and mounted height (3.00mm). The Vishay part provides higher current rating (4.3 A vs. 3.6 A) and lower DC resistance (85.3mOhm vs. 100mOhm), making it functionally equivalent and performance-compatible.

Q: What are the key electrical parameters that define substitution eligibility?

A: Inductance value, inductance tolerance, operating temperature range, shielding configuration, and DC resistance are the primary determinants. Both parts match on inductance and tolerance. The substitute's improved current rating and reduced resistance represent performance enhancements rather than deviations.

Q: Are there mechanical compatibility concerns?

A: No. Both parts are surface mount inductors with identical seated height (3.00mm). Footprint dimensions are similar (Sumida: 8.10mm × 7.80mm; Vishay: 8.64mm × 8.18mm), requiring standard PCB layout verification but presenting no fundamental incompatibility.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, carry EAR99 export classification, and maintain MSL 1 (Unlimited) moisture sensitivity rating, confirming equivalent regulatory standing.

Q: What is the difference in packaging between these parts?

A: The 0830CDMCCDS-150MC is supplied in Cut Tape (CT) packaging, while the IHLP3232CZER150M11 is supplied in Tape & Reel (TR) packaging. This affects handling and assembly processes but does not impact electrical or mechanical performance.