0830CDMCCDS-100MC Equivalent & Substitute Parts

Part Overview

The 0830CDMCCDS-100MC is a 10 µH shielded molded inductor manufactured by Sumida America Components Inc., rated for 4.5 A continuous current with a maximum DC resistance of 72 mOhm. This component is designed for surface mount applications in power conversion, filtering, and energy storage circuits requiring compact form factors and controlled inductance values. The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1).

Substitute parts are identified when equivalent electrical performance can be maintained within the specified parameter tolerances while meeting the same environmental and compliance requirements.

Substiute Parts

0830CDMCCDS-100MC

Sumida America Components Inc.In Stock: 6840830CDMCCDS-100MC Datasheet

Current PartRFQ

IHLP3232CZER100M11

Vishay DaleIn Stock: 3863IHLP3232CZER100M11 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The IHLP3232CZER100M11 from Vishay Dale qualifies as a direct substitute based on the following alignment of critical electrical parameters:

Matching Parameters:

• Inductance value: 10 µH (identical)
• Inductance tolerance: ±20% (identical)
• Operating temperature range: -55°C to 125°C (identical)
• Inductance test frequency: 100 kHz (identical)
• Shielding type: Shielded (identical)
• Mounting type: Surface Mount (identical)
• RoHS3 compliance: Confirmed (identical)
• MSL rating: 1 (Unlimited) (identical)

Enhanced Performance Characteristics:

• Current rating: 5.3 A (exceeds 4.5 A requirement)
• DC resistance: 55.1 mOhm Max (lower than 72 mOhm specification)

The substitute part maintains all mandatory electrical and environmental specifications while providing improved current handling capacity and reduced resistive losses.

Parameter Comparison

Engineering Selection Recommendations

The IHLP3232CZER100M11 is electrically and environmentally compatible with the 0830CDMCCDS-100MC for applications requiring 10 µH inductance at 4.5 A or lower continuous current levels. Both components maintain Active product status, full RoHS3 compliance, and identical operating temperature specifications.

The substitute part provides measurable advantages in DC resistance (55.1 mOhm versus 72 mOhm), resulting in lower power dissipation and improved thermal performance in the same thermal envelope. The higher current rating (5.3 A) provides additional design margin for transient conditions.

Physical dimensions of the substitute are marginally larger (8.64 × 8.18 mm versus 8.10 × 7.80 mm), requiring verification of available PCB layout space. Both components maintain identical seated height of 3.00 mm.

Frequently Asked Questions (FAQ)

Q: Can the IHLP3232CZER100M11 be used as a direct replacement for the 0830CDMCCDS-100MC?

A: Yes. Both components share identical inductance (10 µH), tolerance (±20%), operating temperature range (-55°C to 125°C), and compliance certifications (RoHS3, MSL 1). The substitute meets or exceeds all electrical requirements of the original part.

Q: What are the key differences between these two inductors?

A: The primary differences are DC resistance (55.1 mOhm versus 72 mOhm), continuous current rating (5.3 A versus 4.5 A), and physical footprint (8.64 × 8.18 mm versus 8.10 × 7.80 mm). The substitute offers lower resistive losses and higher current capacity within the same height constraint.

Q: Are there any PCB layout considerations when switching to the IHLP3232CZER100M11?

A: The substitute component has a slightly larger footprint. Verify that the PCB layout accommodates the increased dimensions (0.54 mm longer and 0.38 mm wider). The identical seated height (3.00 mm) eliminates clearance concerns in the vertical direction.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the 0830CDMCCDS-100MC and IHLP3232CZER100M11 carry MSL 1 (Unlimited) ratings, indicating no moisture sensitivity restrictions for storage or handling.

Q: What is the saturation current difference, and does it affect substitution?

A: The original part has a saturation current of 5.4 A, while the substitute is rated at 3.8 A. For applications operating at or below 4.5 A continuous current, this difference does not impact performance. Applications requiring operation near saturation limits should retain the original part.