Equivalent & Substitute Parts for 0826-1Z1T-23-F

Part Overview

The 0826-1Z1T-23-F is a 1 Port RJ45 Through Hole modular connector manufactured by Bel Fuse Inc., designed for 10/100/1000 Base-T Ethernet applications with AutoMDIX capability. This MagJack® series connector features a 90° right-angle orientation, solder termination, and integrated LED indicators (Yellow-Green, Orange). The product is currently active and widely used in network interface applications requiring shielded, EMI-protected connectivity.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications can be maintained across different manufacturers while preserving core functionality in 10/100/1000 Base-T networking applications.

Substiute Parts

0826-1Z1T-23-F

Bel Fuse Inc.In Stock: 8330826-1Z1T-23-F Datasheet

Current PartRFQ

JK0-0187NL

Pulse ElectronicsIn Stock: 1196JK0-0187NL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The JK0-0187NL from Pulse Electronics qualifies as a direct substitute for the 0826-1Z1T-23-F based on the following critical parameters:

Electrical Compatibility:

• Identical connector type (RJ45) and port configuration (1 port)
• Matching application specification (10/100/1000 Base-T, AutoMDIX)
• Equivalent shielding design (Shielded, EMI Finger)
• Identical core count (12 cores per jack)
• Gold contact finish with equivalent thickness (50.0µin / 1.27µm)

Mechanical Compatibility:

• Through Hole mounting type
• 90° right-angle orientation
• Solder termination method
• Board guide feature present
• Tab direction (Up) matches original design
• Height above board within acceptable tolerance (0.536" vs 0.546")

Compliance & Certification:

• Both products maintain RoHS compliance
• REACH Unaffected status on both parts
• Identical ECCN and HTSUS classifications
• Active product status for both manufacturers

Parameter Comparison

Engineering Selection Recommendations

Both the 0826-1Z1T-23-F and JK0-0187NL maintain active product status with full regulatory compliance. Selection between these parts should be based on:

Supply Chain Considerations: The JK0-0187NL currently maintains higher inventory availability (1138 pcs vs 751 pcs), which may influence procurement decisions for high-volume applications.

Compliance Alignment: Both parts satisfy RoHS and REACH requirements. The 0826-1Z1T-23-F carries ROHS3 certification, while the JK0-0187NL carries standard RoHS compliance. Both classifications are acceptable for equivalent applications.

Physical Tolerance: The height above board difference (0.010" / 0.26mm) is within standard PCB layout tolerances and does not impact electrical performance or mechanical fit in standard applications.

Material Specifications: Contact material differs (Copper Alloy vs Phosphor Bronze) and shield material differs (Copper Alloy vs Brass), but both combinations provide equivalent EMI shielding and electrical performance for 10/100/1000 Base-T applications.

Frequently Asked Questions (FAQ)

Q: Can JK0-0187NL be used as a direct replacement for 0826-1Z1T-23-F in existing designs?

A: Yes. Both connectors share identical electrical specifications for 10/100/1000 Base-T applications, matching connector type, port configuration, mounting method, orientation, and termination approach. The 0.010" height difference is within standard PCB design tolerances.

Q: Are there differences in LED indicator specifications between these parts?

A: Yes. The 0826-1Z1T-23-F features Yellow-Green and Orange LED colors, while the JK0-0187NL features Green LED indicators. If specific LED color requirements exist in the application, this difference must be evaluated against design specifications.

Q: What is the significance of the different contact materials?

A: The 0826-1Z1T-23-F uses Copper Alloy contacts while the JK0-0187NL uses Phosphor Bronze. Both materials with gold finish provide equivalent electrical conductivity and corrosion resistance for Ethernet applications. Material selection does not impact electrical performance at 10/100/1000 Base-T speeds.

Q: Do packaging differences affect component selection?

A: The 0826-1Z1T-23-F is supplied without specified packaging, while the JK0-0187NL is supplied in Tray packaging. Packaging affects handling and storage but does not impact electrical or mechanical compatibility. Confirm packaging requirements with procurement specifications.

Q: Are both parts suitable for automated assembly processes?

A: Both parts feature Through Hole solder termination and identical mechanical orientation (90° right angle), making them compatible with standard PCB assembly equipment and processes.

Q: What is the MSL (Moisture Sensitivity Level) consideration for these parts?

A: The 0826-1Z1T-23-F lists MSL as Not Applicable, while the JK0-0187NL carries MSL 1 (Unlimited). This indicates the JK0-0187NL has no moisture sensitivity restrictions, providing greater flexibility in storage and handling conditions.