Equivalent & Substitute Parts for 0826-1D1T-43-F

Part Overview

The 0826-1D1T-43-F is a 1 Port RJ45 Through Hole modular connector manufactured by Bel Fuse Inc., designed for 10/100/1000 Base-T Ethernet applications with AutoMDIX capability. This MagJack® series connector features a 90° right-angle orientation, solder termination, and integrated LED indicators (Yellow-Green). The connector is currently in active production status with 872 pieces available in new original inventory.

Alternative part numbers may be required due to supply chain constraints, inventory availability, or specific packaging requirements while maintaining functional and electrical compatibility.

Substiute Parts

0826-1D1T-43-F

Bel Fuse Inc.In Stock: 9280826-1D1T-43-F Datasheet

Current PartRFQ

JK0-0136NL

Pulse ElectronicsIn Stock: 3847JK0-0136NL Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part JK0-0136NL from Pulse Electronics is functionally equivalent to the 0826-1D1T-43-F based on the following critical parameters:

• Connector Type & Port Configuration: Both are single-port RJ45 connectors with 8 cores per jack
• Application Compatibility: Both support 10/100/1000 Base-T Ethernet with AutoMDIX functionality
• Mechanical Compatibility: Both feature through-hole mounting, 90° right-angle orientation, solder termination, and board guide features
• Electrical Protection: Both incorporate shielded design with EMI finger protection
• Environmental Compliance: Both meet RoHS and REACH regulatory requirements
• Operating Range: Both operate within 0°C to 70°C temperature range

Substitution is valid when the application requires a single-port RJ45 connector with the specified electrical and mechanical characteristics, regardless of minor variations in contact material composition, shield material, or LED color configuration.

Parameter Comparison

Engineering Selection Recommendations

Both connectors are active production components with full regulatory compliance. Selection between 0826-1D1T-43-F and JK0-0136NL should be based on:

• Inventory Availability: The 0826-1D1T-43-F has 872 pieces in stock; JK0-0136NL has 3836 pieces available
• Packaging Format: The 0826-1D1T-43-F is supplied without specified packaging; JK0-0136NL is supplied in Tray packaging
• Height Tolerance: The JK0-0136NL has a slightly greater height above board (0.546" vs 0.536"), which must be verified against PCB layout constraints
• Regulatory Compliance: Both meet RoHS and REACH requirements; the 0826-1D1T-43-F achieves ROHS3 compliance while JK0-0136NL meets RoHS compliance

Frequently Asked Questions (FAQ)

Q: Can JK0-0136NL be used as a direct replacement for 0826-1D1T-43-F in existing designs?

A: Yes, provided the 0.26mm height difference (0.546" vs 0.536") does not conflict with PCB layout constraints. Both connectors share identical connector type, port configuration, application support, mounting method, and termination approach.

Q: Are there differences in electrical performance between these two connectors?

A: Both connectors support identical 10/100/1000 Base-T Ethernet applications with AutoMDIX functionality. Contact material composition differs (Copper Alloy vs Phosphor Bronze) and contact finish thickness varies (50.0µin vs 30.0µin), but both maintain gold plating for signal integrity.

Q: What is the significance of the different LED color configurations?

A: The 0826-1D1T-43-F features Yellow-Green LEDs while JK0-0136NL features Yellow and Green LEDs. This is a visual indicator difference only and does not affect electrical functionality or Ethernet protocol compliance.

Q: Does packaging format affect substitution eligibility?

A: Packaging format (bulk vs Tray) does not affect electrical or mechanical compatibility. Selection should be based on assembly process requirements and inventory management practices.

Q: Are both parts suitable for the same operating temperature range?

A: Yes, both connectors operate within 0°C to 70°C, making them suitable for identical thermal environments.