Equivalent & Substitute Parts for 0817-1AX1-11-F

Part Overview

The 0817-1AX1-11-F is a 1 Port RJ45 Through Hole 10/100 Base-T modular connector manufactured by Bel Fuse Inc. under the MagJack® series. This connector features a 90° angle right orientation with solder termination and integrated LED indicators (Yellow-Green). The product is currently obsolete, making identification of compatible substitute parts essential for ongoing system support and component procurement.

Substiute Parts

0817-1AX1-11-F

Bel Fuse Inc.In Stock: 8980817-1AX1-11-F Datasheet

Current PartRFQ

SI-50163-F

Stewart ConnectorIn Stock: 993SI-50163-F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0817-1AX1-11-F is determined by strict alignment of the following critical parameters:

• Connector Type: RJ45
• Number of Ports: 1
• Applications: 10/100 Base-T
• Mounting Type: Through Hole
• Orientation: 90° Angle (Right)
• Termination: Solder
• LED Color: Yellow - Green
• Number of Cores per Jack: 5
• Shielding: Shielded
• Contact Material: Copper Alloy
• Contact Finish: Gold
• Contact Finish Thickness: 50.0µin (1.27µm)
• Shield Material: Copper Alloy

The SI-50163-F from Stewart Connector meets all critical substitution criteria and is classified as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

The SI-50163-F is a direct functional equivalent to the 0817-1AX1-11-F. Both connectors share identical electrical and mechanical specifications across all critical parameters. The SI-50163-F offers the advantage of active product status, ensuring continued availability and supply chain stability. The SI-50163-F carries ROHS3 compliance certification, meeting current regulatory requirements for electronic component manufacturing. The height differential of 0.019" (0.48mm) between the two connectors is within typical PCB design tolerances and does not affect functional compatibility. The MSL rating of 1 (Unlimited) for the SI-50163-F indicates superior moisture handling characteristics compared to the original part.

Frequently Asked Questions (FAQ)

Q: Can the SI-50163-F be used as a direct replacement for the 0817-1AX1-11-F?

A: Yes. The SI-50163-F meets all critical electrical and mechanical specifications of the 0817-1AX1-11-F, including connector type, port configuration, application rating, mounting method, orientation, termination type, LED color, core count, shielding, contact material, contact finish, and shield material.

Q: What is the significance of the height difference between these connectors?

A: The SI-50163-F has a height above board of 0.550" (13.97mm) compared to 0.531" (13.49mm) for the 0817-1AX1-11-F. This 0.019" (0.48mm) difference is within standard PCB design tolerances and does not impact electrical performance or mechanical fit in typical applications.

Q: Does the SI-50163-F meet current compliance standards?

A: Yes. The SI-50163-F is ROHS3 compliant and carries REACH Unaffected status, meeting current regulatory requirements for electronic component manufacturing and environmental compliance.

Q: What does the MSL rating difference indicate?

A: The SI-50163-F carries an MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage and handling. The original 0817-1AX1-11-F lists MSL as Not Applicable. This represents an improvement in component robustness for supply chain management.

Q: Are there any electrical performance differences between these connectors?

A: No. Both connectors are rated for 10/100 Base-T applications with identical contact material (Copper Alloy), contact finish (Gold), and contact finish thickness (50.0µin / 1.27µm). Electrical performance is equivalent.

Q: Why is the 0817-1AX1-11-F obsolete?

A: The 0817-1AX1-11-F is listed as obsolete by the manufacturer. The SI-50163-F maintains active product status, ensuring continued availability and manufacturer support for this connector category.