0805ZC564MAT2A Equivalent & Substitute Parts

Part Overview

The 0805ZC564MAT2A is a 0.56 µF ceramic capacitor manufactured by KYOCERA AVX, rated for 10V with X7R temperature coefficient in 0805 (2012 Metric) surface mount package. This part is currently active in production. Substitute parts may be required due to inventory availability, lead time constraints, or design optimization needs while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Capacitance	0.56 µF
Voltage Rating	10V
Tolerance	±20%
Temperature Coefficient	X7R
Package / Case	0805 (2012 Metric)
Mounting Type	Surface Mount, MLCC
Operating Temperature Range	-55°C ~ 125°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution for the 0805ZC564MAT2A is determined by the following mandatory parameters:

Capacitance: Must be 0.56 µF (exact match required)
Package / Case: Must be 0805 (2012 Metric) for mechanical compatibility
Temperature Coefficient: Must be X7R for thermal stability equivalence
Mounting Type: Must be Surface Mount, MLCC
Operating Temperature Range: Must support -55°C ~ 125°C
Voltage Rating: Must be equal to or greater than 10V
Tolerance: May vary (±10% or ±20% acceptable)
RoHS / REACH Compliance: Must maintain ROHS3 Compliant and REACH Unaffected status

The substitute parts listed below meet all mandatory electrical and mechanical parameters for direct replacement in applications designed for the 0805ZC564MAT2A.

Parameter Comparison

Parameter	0805ZC564MAT2A (KYOCERA AVX)	C0805C564K8RAC7800 (KEMET)	C0805C564K4RAC7800 (KEMET)	GRM219R71C564KA01D (Murata Electronics)
Capacitance	0.56 µF	0.56 µF	0.56 µF	0.56 µF
Voltage Rating	10V	10V	16V	16V
Tolerance	±20%	±10%	±10%	±10%
Temperature Coefficient	X7R	X7R	X7R	X7R
Package / Case	0805 (2012 Metric)	0805 (2012 Metric)	0805 (2012 Metric)	0805 (2012 Metric)
Size / Dimension	0.079" L x 0.049" W (2.00mm x 1.25mm)	0.079" L x 0.049" W (2.00mm x 1.25mm)	0.079" L x 0.049" W (2.00mm x 1.25mm)	0.079" L x 0.049" W (2.00mm x 1.25mm)
Thickness (Max)	0.037" (0.94mm)	0.039" (1.00mm)	0.039" (1.00mm)	0.037" (0.95mm)
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C
Mounting Type	Surface Mount, MLCC	Surface Mount, MLCC	Surface Mount, MLCC	Surface Mount, MLCC
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Active	Active	Active	Not For New Designs

Engineering Selection Recommendations

C0805C564K8RAC7800 (KEMET) is the primary substitute for the 0805ZC564MAT2A. This part maintains identical voltage rating (10V), package dimensions, and operating temperature range. The improved tolerance specification (±10% versus ±20%) provides tighter capacitance control. Product status is Active, ensuring continued availability and support.

C0805C564K4RAC7800 (KEMET) is an alternative substitute with elevated voltage rating (16V). This part is suitable for applications where higher voltage margin is beneficial. Tolerance is ±10%, and product status is Active.

GRM219R71C564KA01D (Murata Electronics) meets all electrical and mechanical substitution criteria with 16V rating and ±10% tolerance. However, this part carries a "Not For New Designs" status, indicating it is in mature phase with potential future discontinuation. Use this part only when inventory of active alternatives is unavailable.

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, ensuring regulatory equivalence with the original part.

Frequently Asked Questions (FAQ)

Q: Can C0805C564K4RAC7800 replace 0805ZC564MAT2A in a 10V application?

A: Yes. C0805C564K4RAC7800 is rated for 16V, which exceeds the 10V requirement. Higher voltage rating does not compromise performance in lower voltage applications. All other electrical and mechanical parameters are compatible.

Q: What is the difference between ±20% and ±10% tolerance?

A: Tolerance specifies the allowable deviation from the nominal 0.56 µF capacitance value. ±20% allows deviation from 0.448 µF to 0.672 µF. ±10% allows deviation from 0.504 µF to 0.616 µF. The ±10% tolerance parts (KEMET and Murata) provide tighter capacitance control.

Q: Why is GRM219R71C564KA01D marked "Not For New Designs"?

A: This designation indicates the part is in mature production phase. While currently available, the manufacturer may discontinue it in the future. For new designs, KEMET alternatives (C0805C564K8RAC7800 or C0805C564K4RAC7800) are recommended.

Q: Are all substitute parts identical in physical dimensions?

A: All parts use the 0805 (2012 Metric) package with identical length and width (0.079" x 0.049"). Maximum thickness varies slightly: 0.037" (0.94mm) for the original and GRM219R71C564KA01D, and 0.039" (1.00mm) for KEMET parts. These variations are within standard PCB assembly tolerances and do not affect compatibility.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. All substitute parts share identical package footprint (0805), mounting type (Surface Mount, MLCC), and operating temperature range (-55°C ~ 125°C). They are electrically and mechanically interchangeable.

Q: What is Moisture Sensitivity Level (MSL) 1?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All listed parts have MSL 1, meaning they can be stored and handled without special moisture control procedures.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message