Equivalent & Substitute Parts for 08053C103KAT2P

Part Overview

The 08053C103KAT2P is a 10000 pF ceramic capacitor manufactured by KYOCERA AVX with X7R temperature coefficient, rated for 25V operation in 0805 (2012 Metric) surface mount package. This part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that maintain the same capacitance, tolerance, temperature coefficient, and package form factor while offering active product status and improved availability.

Key Parameters

Parameter	Value	Significance for Substitution
Capacitance	10000 pF	Must match exactly
Tolerance	±10%	Defines acceptable capacitance range; tighter tolerances are acceptable
Voltage Rating	25V	Minimum required; higher ratings are acceptable
Temperature Coefficient	X7R	Must match for temperature stability characteristics
Package / Case	0805 (2012 Metric)	Must match for PCB layout compatibility
Mounting Type	Surface Mount, MLCC	Must match for assembly process compatibility
Operating Temperature	-55°C ~ 125°C	Must meet or exceed this range
RoHS Status	ROHS3 Compliant	Regulatory requirement; must maintain compliance
Moisture Sensitivity Level	1 (Unlimited)	Handling and storage requirements

Substitute Part Grouping Explanation

Substitution logic is based on the following criteria:

Primary Matching Criteria (Non-Negotiable):

Capacitance: 10000 pF (exact match required)
Temperature Coefficient: X7R (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Mounting Type: Surface Mount, MLCC (exact match required)
Operating Temperature Range: -55°C ~ 125°C (minimum requirement)
RoHS Status: ROHS3 Compliant (regulatory requirement)

Secondary Matching Criteria (Flexible):

Voltage Rating: 25V minimum (higher ratings are acceptable and provide design margin)
Tolerance: ±10% or tighter (±5% tolerance is acceptable as it is more stringent)
Packaging Format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel® (both are acceptable for production)

Substitution Categories:

Category 1: Direct Equivalents (Same Voltage Rating - 25V) Parts with identical 25V rating and ±10% tolerance, offering active product status and improved inventory availability.

Category 2: Upgraded Voltage Rating (50V, 100V, 200V, 250V) Parts with higher voltage ratings provide increased design margin and are electrically compatible. Higher voltage ratings do not degrade performance in 25V applications.

Category 3: Improved Tolerance (±5%) Parts with ±5% tolerance provide tighter capacitance control while maintaining all other specifications.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Tolerance	Voltage Rating	Temperature Coefficient	Package	Thickness (Max)	Product Status	Inventory
08053C103KAT2P	KYOCERA AVX	10000 pF	±10%	25V	X7R	0805 (2012 Metric)	0.037" (0.94mm)	Discontinued	1012 Pcs
KGM21NR71E103KM	KYOCERA AVX	10000 pF	±10%	25V	X7R	0805 (2012 Metric)	0.039" (1.00mm)	Active	1105 Pcs
KGM21NR71E103KT	KYOCERA AVX	10000 pF	±10%	25V	X7R	0805 (2012 Metric)	0.039" (1.00mm)	Active	31267 Pcs
KGM21NR71E103JT	KYOCERA AVX	10000 pF	±5%	25V	X7R	0805 (2012 Metric)	0.039" (1.00mm)	Active	53828 Pcs
KGM21NR71H103JT	KYOCERA AVX	10000 pF	±5%	50V	X7R	0805 (2012 Metric)	0.039" (1.00mm)	Active	44363 Pcs
KGM21NR71H103KT	KYOCERA AVX	10000 pF	±10%	50V	X7R	0805 (2012 Metric)	0.039" (1.00mm)	Active	437140 Pcs
KGM21NR72A103JT	KYOCERA AVX	10000 pF	±5%	100V	X7R	0805 (2012 Metric)	0.039" (1.00mm)	Active	31895 Pcs
KGM21AR72D103JU	KYOCERA AVX	10000 pF	±5%	200V	X7R	0805 (2012 Metric)	0.057" (1.45mm)	Active	7021 Pcs
KGM21AR72D103KL	KYOCERA AVX	10000 pF	±10%	200V	X7R	0805 (2012 Metric)	0.057" (1.45mm)	Active	29756 Pcs
KGM21AR72D103KU	KYOCERA AVX	10000 pF	±10%	200V	X7R	0805 (2012 Metric)	0.057" (1.45mm)	Active	81137 Pcs
0805PC103KAT2A	KYOCERA AVX	10000 pF	±10%	250V	X7R	0805 (2012 Metric)	0.051" (1.30mm)	Active	8603 Pcs

Engineering Selection Recommendations

Tier 1 - Direct Replacement (Recommended for Immediate Substitution):

KGM21NR71E103KT is the primary recommended substitute. This part maintains identical electrical specifications (10000 pF, ±10%, 25V, X7R) and package form factor as the original 08053C103KAT2P. It carries active product status with substantial inventory availability (31267 Pcs), ensuring supply chain continuity. Both parts are ROHS3 compliant with MSL 1 rating and identical operating temperature range (-55°C ~ 125°C).

Tier 2 - Enhanced Tolerance Alternative:

KGM21NR71E103JT provides identical voltage rating (25V) and package specifications with improved ±5% tolerance. This part is suitable for applications requiring tighter capacitance control. Inventory availability is excellent (53828 Pcs), and product status is active.

Tier 3 - Voltage-Upgraded Alternatives:

For applications where design margin is beneficial, KGM21NR71H103KT (50V, ±10%) offers the highest inventory availability (437140 Pcs) among all substitutes. KGM21NR71H103JT (50V, ±5%) and KGM21NR72A103JT (100V, ±5%) provide both voltage upgrade and tolerance improvement. Higher voltage ratings do not compromise performance in 25V circuits and provide additional reliability margin.

Tier 4 - High-Voltage Alternatives:

KGM21AR72D103KL and KGM21AR72D103KU (200V, ±10%) offer maximum voltage margin with substantial inventory (29756 Pcs and 81137 Pcs respectively). 0805PC103KAT2A (250V, ±10%) provides the highest voltage rating. These parts are suitable for applications requiring extended voltage headroom. Note: Thickness increases to 0.057" (1.45mm) for 200V parts and 0.051" (1.30mm) for 250V part; verify PCB clearance before selection.

Compliance Verification:

All recommended substitutes maintain ROHS3 compliance, REACH unaffected status, and MSL 1 moisture sensitivity rating. All parts are classified under ECCN EAR99 and HTSUS 8532.24.0020, ensuring regulatory consistency with the original part.

Frequently Asked Questions (FAQ)

Q1: Can I use a 50V or 100V rated capacitor in place of the 25V original part?

A: Yes. Higher voltage ratings are electrically compatible with 25V applications. The voltage rating indicates the maximum voltage the capacitor can withstand; using a higher-rated part provides additional design margin and does not degrade circuit performance. All substitute parts with 50V, 100V, 200V, or 250V ratings are functionally suitable for 25V circuits.

Q2: What is the difference between ±10% and ±5% tolerance?

A: Tolerance defines the acceptable range of actual capacitance around the nominal value. A ±10% tolerance part can vary from 9000 pF to 11000 pF. A ±5% tolerance part ranges from 9500 pF to 10500 pF. For general-purpose applications, ±10% is standard. Select ±5% tolerance parts only if circuit design requires tighter capacitance control.

Q3: Why do some substitute parts have different thickness values?

A: Thickness varies with voltage rating. Lower voltage ratings (25V, 50V, 100V) typically measure 0.039" (1.00mm) maximum thickness. Higher voltage ratings (200V) measure 0.057" (1.45mm), and 250V parts measure 0.051" (1.30mm). Before selecting a higher-voltage substitute, verify that PCB layout and component clearance accommodate the increased thickness.

Q4: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity level, matching the original part's regulatory status. All parts are REACH unaffected and classified as EAR99 for export control purposes.

Q5: What packaging formats are available for these substitutes?

A: Substitute parts are available in Tape & Reel (TR) format for production quantities and Cut Tape (CT) & Digi-Reel® format for smaller orders. KGM21NR71E103JT is available in Cut Tape & Digi-Reel® format. All other substitutes are supplied in Tape & Reel format. Verify packaging requirements with your procurement process before finalizing part selection.

Q6: Which substitute offers the best inventory availability?

A: KGM21NR71H103KT (50V, ±10%) provides the highest inventory availability with 437140 Pcs in stock. For 25V applications specifically, KGM21NR71E103KT offers 31267 Pcs with identical electrical specifications to the original part.

Q7: Can I mix different substitute parts in the same production run?

A: All listed substitutes share identical capacitance (10000 pF), temperature coefficient (X7R), package (0805), and operating temperature range (-55°C ~ 125°C). They are electrically interchangeable. However, for manufacturing consistency and traceability, it is standard practice to use a single part number per production batch. Consult your quality assurance procedures before implementing mixed-part strategies.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message