Equivalent & Substitute Parts for 08053A751JAT2A

Part Overview

The 08053A751JAT2A is a 750 pF ceramic capacitor manufactured by KYOCERA AVX, rated at 25V with C0G/NP0 temperature coefficient in 0805 (2012 Metric) surface mount package. This part is currently active in production. Substitute parts are identified to provide design flexibility, voltage rating upgrades, tolerance improvements, and alternative sourcing options while maintaining electrical and mechanical compatibility within the 0805 package form factor.

Substiute Parts

08053A751JAT2A

KYOCERA AVXIn Stock: 94208053A751JAT2A Datasheet

Current PartRFQ

08055A751JAT2A

KYOCERA AVXIn Stock: 6271808055A751JAT2A Datasheet

UpgradeRFQ

C0805C751F5GAC7800

KEMETIn Stock: 23596C0805C751F5GAC7800 Datasheet

UpgradeRFQ

C0805C751J5GAC7800

KEMETIn Stock: 9881C0805C751J5GAC7800 Datasheet

UpgradeRFQ

GRM2165C1H751JA01D

Murata ElectronicsIn Stock: 2854GRM2165C1H751JA01D Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 08053A751JAT2A are qualified based on the following criteria:

Electrical Parameters (Must Match):

• Capacitance: 750 pF
• Temperature Coefficient: C0G, NP0
• Operating Temperature Range: -55°C ~ 125°C

Mechanical Parameters (Must Match):

• Package / Case: 0805 (2012 Metric)
• Mounting Type: Surface Mount, MLCC

Allowable Variations:

• Voltage Rating: Equal to or greater than 25V (upgrades permitted)
• Tolerance: Equal to or tighter than ±5% (improvements permitted)
• Manufacturer: Different manufacturers acceptable
• Packaging Format: Tape & Reel acceptable as alternative to standard packaging

All identified substitutes maintain identical capacitance, temperature coefficient, and package dimensions, ensuring direct functional replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

For Active Production Designs: The 08055A751JAT2A (KYOCERA AVX) and C0805C751J5GAC7800 (KEMET) are recommended as primary substitutes. Both parts are active in production status, maintain full ROHS3 compliance, and provide voltage rating upgrades to 50V while preserving all electrical specifications of the original 08053A751JAT2A.

For Improved Tolerance Requirements: The C0805C751F5GAC7800 (KEMET) offers ±1% tolerance with 50V rating, suitable for applications requiring tighter capacitance control. This part is active in production and ROHS3 compliant.

For Legacy or Existing Inventory: The GRM2165C1H751JA01D (Murata Electronics) is marked "Not For New Designs" and should be used only for maintenance or repair of existing assemblies. This part remains ROHS3 compliant and available in inventory.

All substitute parts are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity rating, matching the environmental qualification of the original part.

Frequently Asked Questions (FAQ)

Q: Can I use a 50V rated capacitor in place of the 25V original part? A: Yes. A higher voltage rating provides additional design margin and is electrically compatible. The 50V substitutes (08055A751JAT2A, C0805C751F5GAC7800, C0805C751J5GAC7800, GRM2165C1H751JA01D) are direct functional replacements for the 25V original.

Q: What is the difference between ±5% and ±1% tolerance? A: Tolerance specifies the allowable deviation from the nominal 750 pF capacitance value. ±1% tolerance (C0805C751F5GAC7800) provides tighter capacitance control compared to ±5% tolerance. Selection depends on circuit requirements for capacitance accuracy.

Q: Are all substitutes available in the same 0805 package? A: Yes. All substitute parts use the 0805 (2012 Metric) surface mount package with identical footprint dimensions (0.079" L x 0.049" W / 2.01mm x 1.25mm), ensuring direct PCB compatibility.

Q: Why is GRM2165C1H751JA01D marked "Not For New Designs"? A: This Murata part is in legacy status. It remains available for existing inventory and repair applications but should not be selected for new product designs. Use active production alternatives instead.

Q: Do all substitutes meet the same environmental and compliance standards? A: Yes. All substitute parts are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity rating, and operate across the -55°C ~ 125°C temperature range, matching the original part's environmental qualifications.

Q: Can I mix different manufacturers in the same assembly? A: Yes. All substitute parts maintain identical electrical and mechanical specifications. Multi-source procurement using KYOCERA AVX, KEMET, and Murata parts is supported for supply chain flexibility.