08052C561KAJ2A Equivalent & Substitute Parts

Part Overview

The 08052C561KAJ2A is a 560 pF ±10% 200V ceramic capacitor manufactured by KYOCERA AVX with X7R temperature coefficient in 0805 (2012 Metric) surface mount package. This part is currently active in production with 1,181 pieces in stock. The part is RoHS non-compliant and REACH affected, which may necessitate identification of compliant alternatives for applications requiring regulatory compliance or long-term supply assurance.

Substiute Parts

08052C561KAJ2A

KYOCERA AVXIn Stock: 127608052C561KAJ2A Datasheet

Current PartRFQ

08052C561JAT2A

KYOCERA AVXIn Stock: 855208052C561JAT2A Datasheet

UpgradeRFQ

08052C561K4T2A

KYOCERA AVXIn Stock: 884108052C561K4T2A Datasheet

UpgradeRFQ

08052C561KAT2A

KYOCERA AVXIn Stock: 358408052C561KAT2A Datasheet

Parametric EquivalentRFQ

C0805C561K2RAC7800

KEMETIn Stock: 4750C0805C561K2RAC7800 Datasheet

DirectRFQ

C0805C561JCGAC7800

KEMETIn Stock: 5575C0805C561JCGAC7800 Datasheet

UpgradeRFQ

CC0805KRX7RYBB561

YAGEOIn Stock: 11568CC0805KRX7RYBB561 Datasheet

UpgradeRFQ

C2012C0G2W561J060AA

TDK CorporationIn Stock: 3354C2012C0G2W561J060AA Datasheet

MFR RecommendedRFQ

C2012C0G2W561K060AA

TDK CorporationIn Stock: 4132C2012C0G2W561K060AA Datasheet

MFR RecommendedRFQ

C2012NP02W561J060AA

TDK CorporationIn Stock: 3313C2012NP02W561J060AA Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence in the following parameters: capacitance value (560 pF), package type (0805 / 2012 Metric), mounting method (Surface Mount, MLCC), and operating temperature range (-55°C to 125°C minimum). Voltage rating must equal or exceed 200V. Temperature coefficient must be X7R or equivalent (C0G/NP0 acceptable for higher voltage variants). Tolerance may vary (±5% or ±10%) without affecting functional substitution. Compliance status (RoHS, REACH) and packaging format (Tape & Reel vs. Cut Tape) do not affect electrical equivalence but may affect procurement and regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

Direct electrical substitutes within the same manufacturer (KYOCERA AVX) are 08052C561JAT2A, 08052C561K4T2A, and 08052C561KAT2A. All three maintain 560 pF capacitance, 200V voltage rating, X7R temperature coefficient, and 0805 package. The primary distinction is tolerance (±5% vs. ±10%) and RoHS compliance status. Parts 08052C561K4T2A and 08052C561KAT2A are ROHS3 compliant with higher inventory availability.

Cross-manufacturer substitutes from KEMET (C0805C561K2RAC7800) and YAGEO (CC0805KRX7RYBB561) provide equivalent electrical performance with ROHS3 compliance. The KEMET part maintains identical 200V rating, while the YAGEO part offers 250V rating with X7R coefficient.

Higher voltage alternatives from KEMET (C0805C561JCGAC7800) and TDK Corporation (C2012C0G2W561J060AA, C2012C0G2W561K060AA, C2012NP02W561J060AA) provide 450V to 500V ratings with C0G/NP0 temperature coefficients. These are suitable for applications requiring voltage derating margin or enhanced temperature stability. TDK parts are designated Last Time Buy status.

Selection should prioritize ROHS3 compliant parts for new designs. Inventory levels favor YAGEO (11,474 pcs) and KYOCERA AVX 08052C561K4T2A (8,760 pcs).

Frequently Asked Questions (FAQ)

Q: Can 08052C561JAT2A replace 08052C561KAJ2A directly?

A: Yes. Both parts share identical capacitance (560 pF), voltage rating (200V), temperature coefficient (X7R), and 0805 package. The substitute has ±5% tolerance versus ±10%, which is tighter and acceptable. The primary difference is RoHS3 compliance status of the substitute.

Q: What is the difference between X7R and C0G/NP0 temperature coefficients?

A: X7R provides ±15% capacitance variation across -55°C to 125°C. C0G/NP0 provides ±30 ppm/°C, resulting in superior stability but typically at higher voltage ratings. Both are acceptable for general purpose applications; C0G/NP0 is preferred for precision circuits.

Q: Can I use C0805C561JCGAC7800 (500V) instead of the 200V rated part?

A: Yes, electrically. The 500V part is a direct substitute with higher voltage margin. However, it uses C0G/NP0 temperature coefficient instead of X7R and has different physical thickness (0.055" vs. 0.037"), which may affect PCB layout or thermal performance in space-constrained applications.

Q: Are TDK parts C2012C0G2W561J060AA and C2012C0G2W561K060AA still available?

A: Both are designated Last Time Buy status, indicating discontinued production. Current inventory is 3,293 pcs and 4,022 pcs respectively. These should not be selected for new designs requiring long-term supply.

Q: What does RoHS3 compliance mean for this capacitor?

A: ROHS3 compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, hexavalent chromium, and specific brominated flame retardants. This is required for most commercial and industrial applications in regulated markets.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and automated assembly compatibility. Electrical and mechanical specifications remain identical. Tape & Reel is standard for high-volume production; Cut Tape is used for lower volumes or manual assembly.

Q: Can I substitute a ±5% tolerance part for a ±10% tolerance specification?

A: Yes. A ±5% tolerance part is a tighter specification and is functionally compatible with a ±10% requirement. The actual capacitance will fall within both tolerance bands, making it a valid substitute.