Molex 0761605110 Equivalent & Substitute Parts

Part Overview

The Molex 0761605110 is a 120-position backplane connector receptacle with female sockets, designed for board edge mounting in right-angle configuration. This connector features press-fit termination, gold-plated contacts, and is rated for -55°C to 85°C operation at 30V. The product is currently obsolete, making identification of compatible substitute parts essential for system maintenance, repair, and legacy equipment support.

Substiute Parts

0761605110

MolexIn Stock: 11030761605110 Datasheet

Current PartRFQ

1-2007713-1

TE Connectivity AMP ConnectorsIn Stock: 8951-2007713-1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Molex 0761605110 must satisfy the following criteria:

• Connector Type & Style: Receptacle with female sockets in Impact style with guide right configuration
• Position Count: 120 positions with all positions loaded
• Mounting Configuration: Board edge mounting with through-hole, right-angle orientation
• Termination Method: Press-fit contact termination
• Environmental Compliance: UL94 V-0 flammability rating and operating temperature range of -55°C to 85°C minimum
• Electrical Specifications: Voltage rating of 30V or higher
• Contact Quality: Gold plating with minimum 30.0µin thickness

The TE Connectivity AMP Connectors part 1-2007713-1 meets these core substitution criteria. While the pitch differs (0.075" vs. 0.053"), this represents a different connector family within the same functional category and should be evaluated based on specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 1-2007713-1 is an active product suitable for substitution in applications where the Molex 0761605110 is no longer available. Both connectors share identical mounting configurations, termination methods, and environmental ratings. The primary design consideration is the pitch difference: the TE part operates at 0.075" (1.91mm) spacing versus the Molex part's 0.053" (1.35mm) spacing. This pitch variation requires PCB layout compatibility verification before implementation.

The TE Connectivity part offers the advantage of active product status with current manufacturing support, RoHS compliance, and documented current rating of 0.75A per contact. The Molex part's current rating was not specified in available documentation.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1-2007713-1 directly replace the Molex 0761605110 without PCB modification?

A: Direct replacement requires PCB layout compatibility. The pitch difference (0.075" vs. 0.053") means the contact spacing differs, necessitating verification that the mating connector and PCB trace routing accommodate the TE part's dimensions.

Q: Are both connectors rated for the same voltage and temperature range?

A: Yes. Both connectors operate at 30V and support the -55°C to 85°C temperature range. Both meet UL94 V-0 flammability requirements.

Q: What is the significance of the product status difference?

A: The Molex part is obsolete, indicating discontinued manufacturing and limited availability. The TE Connectivity part is active, ensuring ongoing supply, technical support, and compliance with current standards.

Q: Do both connectors use the same termination method?

A: Yes. Both employ press-fit termination, allowing installation into plated through-holes without soldering.

Q: Are there compliance differences between the two parts?

A: Both are RoHS compliant. The Molex part specifies ROHS3 compliance, while the TE part indicates general RoHS compliance. Both carry EAR99 ECCN classification and identical HTSUS codes.