Molex 0761604016 Equivalent & Substitute Parts

Part Overview

The Molex 0761604016 is a 192-position backplane connector receptacle featuring female sockets with board edge mounting and right-angle orientation. This connector is designed for high-density applications requiring 64 differential pairs across a 12×16 position matrix with 0.053" (1.35mm) pitch spacing.

The 0761604016 carries an obsolete product status, making identification of active equivalent parts essential for ongoing procurement and system maintenance. Substitute parts maintain identical electrical and mechanical specifications while offering current manufacturing availability and active product support.

Substiute Parts

0761604016

MolexIn Stock: 9940761604016 Datasheet

Current PartRFQ

0761605016

MolexIn Stock: 9380761605016 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0761604016 is determined by strict equivalence across the following critical parameters:

• Connector Type & Style: Receptacle with female sockets, Impact series with Guide Right configuration
• Position Count & Matrix: 192 positions in 12×16 arrangement with all positions loaded
• Pitch & Spacing: 0.053" (1.35mm) pitch maintained across all positions
• Mounting Configuration: Board edge mounting with through-hole, right-angle termination
• Electrical Specifications: 30V voltage rating, 64 differential pair layout, press-fit termination
• Environmental & Compliance: UL94 V-0 flammability, -55°C to 85°C operating range, ROHS3 compliance

The Molex 0761605016 qualifies as a direct substitute, maintaining identical specifications across all electrical and mechanical parameters while offering active product status and current manufacturing availability.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0761605016 is the direct active equivalent for the obsolete 0761604016. Both parts are manufactured by Molex within the Impact 76160 series and maintain identical electrical, mechanical, and environmental specifications.

Selection of the 0761605016 is supported by:

• Product Status Alignment: The substitute carries active product status, ensuring continued manufacturing support and procurement availability
• Compliance Equivalence: Both parts maintain ROHS3 compliance and UL94 V-0 flammability certification
• Specification Parity: All critical parameters—position count, pitch, mounting configuration, contact finish, voltage rating, and operating temperature range—are identical
• Packaging Availability: The 0761605016 is supplied in tray packaging with 884 units in current stock

No electrical or mechanical redesign is required when transitioning from the 0761604016 to the 0761605016.

Frequently Asked Questions (FAQ)

Q: Can the 0761605016 be used as a direct replacement for the 0761604016?

A: Yes. Both parts are identical in all electrical and mechanical specifications. The 0761605016 is the active manufacturing equivalent with current availability.

Q: What is the primary difference between these two part numbers?

A: The 0761604016 is obsolete, while the 0761605016 carries active product status. Packaging differs (0761604016 standard vs. 0761605016 tray), but connector specifications are identical.

Q: Are there any compatibility concerns when substituting the 0761605016 for the 0761604016?

A: No compatibility concerns exist. Both connectors feature identical 192-position configuration, 0.053" pitch, board edge mounting, press-fit termination, and gold contact finish. PCB footprints and mating interfaces are identical.

Q: What certifications apply to both parts?

A: Both the 0761604016 and 0761605016 are ROHS3 compliant and carry UL94 V-0 material flammability certification. Both operate across -55°C to 85°C and are rated for 30V applications.

Q: Is the 0761605016 available in the same packaging as the 0761604016?

A: The 0761605016 is supplied in tray packaging. If specific packaging requirements exist, contact the supplier for alternative packaging options.