Molex 0761504016 Equivalent & Substitute Parts

Part Overview

The Molex 0761504016 is a 288-position backplane connector receptacle featuring female sockets with board edge mounting and right-angle orientation. This connector is designed for high-density interconnect applications requiring differential pair configurations. The part is classified as obsolete, making identification of active equivalent components essential for ongoing system support and new design implementations.

Substiute Parts

0761504016

MolexIn Stock: 6710761504016 Datasheet

Current PartRFQ

0761505016

MolexIn Stock: 8520761505016 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0761504016 is determined by strict equivalence across the following critical parameters:

• Connector type: Receptacle with female sockets
• Position count: 288 positions
• Geometric configuration: 18 rows × 16 columns
• Mounting interface: Board edge, through-hole, right-angle orientation
• Contact arrangement: 96 differential pairs
• Termination method: Press-fit
• Electrical ratings: 30V voltage, -55°C to 85°C operating range
• Material compliance: UL94 V-0 flammability rating, ROHS3 compliance

The substitute part must maintain identical mechanical and electrical characteristics to ensure direct compatibility without design modification or board rework.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0761505016 is the direct active equivalent for the obsolete 0761504016. Both parts share identical mechanical interfaces, electrical specifications, and contact configurations within the Impact 76150 series. The substitute part maintains full compliance with ROHS3 and UL94 V-0 standards, ensuring regulatory continuity.

The transition from the obsolete 0761504016 to the active 0761505016 presents no technical barriers to implementation. The substitute part is supplied in tray packaging and carries active product status, ensuring long-term availability and supply chain stability for production and field replacement applications.

Frequently Asked Questions (FAQ)

Q: Can the 0761505016 be used as a direct replacement for the 0761504016 without board modification?

A: Yes. Both parts are mechanically and electrically identical within the Impact 76150 series. The 288-position configuration, 18×16 geometry, board-edge mounting, and press-fit termination are equivalent. No PCB rework is required.

Q: What is the pitch specification for the 0761504016?

A: The pitch for the main part is not specified in the available documentation. The substitute part 0761505016 specifies 0.053" (1.35mm) pitch. Confirmation of pitch equivalence is necessary for applications where this parameter is critical.

Q: Why is the 0761504016 classified as obsolete?

A: The part has reached end-of-life status. The active equivalent 0761505016 is available for new designs and ongoing support requirements.

Q: Are there packaging differences between these parts?

A: The 0761504016 packaging is not specified. The 0761505016 is supplied in tray packaging. Packaging format does not affect electrical or mechanical compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant, UL94 V-0 rated, and carry MSL 1 (Unlimited) moisture sensitivity classification. Regulatory and environmental compliance is equivalent.