Molex 0761504010 Equivalent & Substitute Parts

Part Overview

The Molex 0761504010 is a 180-position backplane connector receptacle with female sockets, designed for board edge mounting in right-angle configuration. This connector features press-fit termination, gold-plated contacts, and is rated for operation between -55°C and 85°C at 30V. The part is classified as obsolete, making identification of suitable substitutes essential for ongoing system support and procurement planning.

Substiute Parts

0761504010

MolexIn Stock: 10270761504010 Datasheet

Current PartRFQ

0761505010

MolexIn Stock: 11370761505010 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The Molex 0761505010 qualifies as a direct substitute for the 0761504010 based on the following critical parameters:

Matching Parameters:

• Identical connector type (Receptacle, Female Sockets)
• Identical series designation (Impact 76150)
• Identical position count (180 positions)
• Identical row and column configuration (18 × 10)
• Identical mounting type (Board Edge, Through Hole, Right Angle)
• Identical termination method (Press-Fit)
• Identical contact finish specification (Gold, 30.0µin)
• Identical operating temperature range (-55°C to 85°C)
• Identical voltage rating (30V)
• Identical flammability rating (UL94 V-0)
• Identical RoHS compliance status (ROHS3 Compliant)
• Identical MSL rating (1 - Unlimited)

Distinguishing Factor: The 0761505010 is an active product with specified pitch of 0.053" (1.35mm) and is supplied in Tray packaging, whereas the 0761504010 is obsolete with unspecified pitch and no packaging designation. The pitch specification in the substitute part confirms the contact spacing standard for this connector family.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0761505010 is the appropriate substitute for the obsolete 0761504010. Both parts maintain identical electrical and mechanical specifications across all critical parameters, including connector configuration, termination method, contact finish, and environmental ratings. The 0761505010 carries active product status, ensuring ongoing availability and supply chain continuity. Both parts satisfy ROHS3 compliance and UL94 V-0 flammability requirements. The pitch specification of 0.053" (1.35mm) provided for the substitute part confirms the standard contact spacing for this connector family and should be verified against existing board designs to ensure compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 0761505010 be used as a direct replacement for the 0761504010?

A: Yes. Both parts share identical connector type, position count, mounting configuration, termination method, contact finish, and environmental ratings. The 0761505010 is the active equivalent of the obsolete 0761504010.

Q: What is the pitch specification for these connectors?

A: The pitch is 0.053" (1.35mm). This specification is explicitly provided for the 0761505010 and applies to the connector family standard.

Q: Are there packaging differences between these parts?

A: The 0761504010 has no specified packaging designation, while the 0761505010 is supplied in Tray packaging. Packaging format should be confirmed with your procurement requirements.

Q: Do both parts meet current compliance standards?

A: Yes. Both the 0761504010 and 0761505010 are ROHS3 compliant with UL94 V-0 flammability rating and MSL 1 (Unlimited) moisture sensitivity level.

Q: What is the operating temperature range for these connectors?

A: Both parts operate across -55°C to 85°C with a 30V voltage rating.