Molex 0740622513 VHDM 200-Position Backplane Connector Header

Part Overview

The Molex 0740622513 is a 200-position VHDM backplane connector header designed for through-hole PCB mounting applications. This connector features male pins with shielded construction, gold-plated contacts, and is rated for 3A current at 120V operating voltage across an extended temperature range of -55°C to 105°C.

The 0740622513 is classified as obsolete. Equivalent substitute parts are available in active product status, making substitution necessary for new designs and ongoing procurement requirements.

Substiute Parts

0740622513

MolexIn Stock: 10620740622513 Datasheet

Current PartRFQ

0740622501

MolexIn Stock: 12100740622501 Datasheet

MFR RecommendedRFQ

0740622504

MolexIn Stock: 23780740622504 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Molex 0740622513 is based on electrical and mechanical parameter equivalence within the VHDM 74062 series. The following parameters must remain identical for direct substitution:

• Connector type: Header, Male Pins
• Connector style: VHDM, Guide Right
• Number of positions: 200
• Number of rows: 8
• Number of columns: 25
• Pitch: 0.079" (2.00mm)
• Mounting type: Through Hole
• Termination: Press-Fit
• Features: Shielded
• Contact finish: Gold
• Color: Black
• Current rating: 3A
• Voltage rating: 120V
• Operating temperature range: -55°C to 105°C
• Material flammability rating: UL94 V-0

The identified substitute parts maintain all critical electrical and mechanical specifications. Differences in product status and regulatory compliance are noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

Both substitute parts 0740622501 and 0740622504 are functionally equivalent to the main part 0740622513 across all critical electrical and mechanical parameters. The primary differentiators are product status and regulatory compliance.

The 0740622501 and 0740622504 are both classified as active products with ROHS3 compliance, whereas the main part is obsolete and RoHS non-compliant. For new designs and applications requiring regulatory compliance with current standards, either substitute part is appropriate. The 0740622504 offers higher inventory availability at 2360 pieces compared to 0740622501 at 1133 pieces.

Frequently Asked Questions (FAQ)

Q: Can the 0740622501 or 0740622504 be used as direct replacements for the 0740622513?

A: Yes. Both substitute parts maintain identical electrical and mechanical specifications including connector type, position count, pitch, current rating, voltage rating, operating temperature range, and flammability rating. They are functionally equivalent for through-hole PCB mounting applications.

Q: What is the difference between the two substitute parts?

A: The 0740622501 and 0740622504 are electrically and mechanically identical. Both are active products with ROHS3 compliance and identical packaging (Tube). The primary difference is inventory availability, with 0740622504 offering higher stock levels.

Q: Why is the main part 0740622513 listed as obsolete?

A: The 0740622513 is classified as obsolete by the manufacturer. Active equivalent parts are available as substitutes for ongoing procurement and new design applications.

Q: Are there any compliance differences between the main part and substitutes?

A: Yes. The main part 0740622513 is RoHS non-compliant, while both substitute parts 0740622501 and 0740622504 are ROHS3 compliant. Both substitute parts maintain the same UL94 V-0 flammability rating and REACH unaffected status as the main part.

Q: What packaging is available for the substitute parts?

A: Both substitute parts 0740622501 and 0740622504 are supplied in Tube packaging. The main part packaging specification was not provided.