Molex 0740592502 VHDM 150-Position Backplane Connector Header

Part Overview

The Molex 0740592502 is a 150-position VHDM backplane connector header designed for through-hole PCB mounting applications. This component features male pins with shielding, gold-plated contacts, and is rated for 2A current at 120V operating voltage across a temperature range of -55°C to 105°C. The part is currently classified as obsolete, making identification of compatible substitute components essential for ongoing system support and procurement planning.

Substiute Parts

0740592502

MolexIn Stock: 11980740592502 Datasheet

Current PartRFQ

0740598502

MolexIn Stock: 8960740598502 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the Molex 0740592502 is determined by strict equivalence across the following critical parameters:

• Connector type, style, and position count (Header, Male Pins; VHDM, Guide Right; 150 positions)
• Physical configuration (6 rows × 25 columns; 0.079" pitch)
• Mounting and termination method (Through Hole; Press-Fit)
• Electrical ratings (2A current; 120V voltage)
• Contact material and finish (Gold plating)
• Operating temperature range (-55°C to 105°C)
• Shielding requirement

The substitute part 0740598502 maintains identical electrical, mechanical, and dimensional specifications across all these parameters, establishing direct functional equivalence. The primary distinction between the main part and substitute is product status and regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0740598502 is the direct functional equivalent of the 0740592502. Both components share identical electrical and mechanical specifications, ensuring pin-for-pin compatibility and interchangeability in PCB applications.

The primary distinction is regulatory compliance. The 0740598502 is ROHS3 compliant and maintains active product status, whereas the 0740592502 is obsolete and RoHS non-compliant. For new designs or systems requiring regulatory compliance with current environmental standards, the 0740598502 is the appropriate selection. For legacy system maintenance where RoHS compliance is not a requirement, either part satisfies the functional specification.

Both components are available in inventory: 1145 units of the main part and 810 units of the substitute part.

Frequently Asked Questions (FAQ)

Q: Are the 0740592502 and 0740598502 mechanically interchangeable?

A: Yes. Both parts are identical in physical dimensions, pin configuration (150 positions in 6 rows × 25 columns), pitch (0.079"), mounting type (through-hole), and termination method (press-fit). They are direct mechanical substitutes.

Q: What is the difference between these two parts?

A: The primary differences are product status and regulatory compliance. The 0740592502 is obsolete and RoHS non-compliant. The 0740598502 is active and ROHS3 compliant. All electrical and mechanical parameters are identical.

Q: Can I use the 0740598502 in place of the 0740592502?

A: Yes. The 0740598502 provides full functional equivalence and is suitable for direct substitution in any application currently using the 0740592502.

Q: Does packaging differ between these parts?

A: The 0740592502 packaging is listed as unspecified. The 0740598502 is supplied in bulk packaging. Verify packaging requirements with your procurement specification before ordering.

Q: Are there any electrical or thermal differences?

A: No. Both parts are rated for 2A current, 120V voltage, and operate across the same temperature range (-55°C to 105°C). Contact finish, gold plating thickness, and shielding specifications are identical.

Q: Which part should I specify for new designs?

A: Specify the 0740598502. It maintains all functional equivalence to the 0740592502 while providing ROHS3 compliance and active product status, ensuring long-term availability and regulatory alignment.