Phoenix Contact 0719032 Terminal Block - Equivalent & Substitute Parts

Part Overview

The Phoenix Contact 0719032 is a 2-position feed-through terminal block connector rated for 14-30 AWG wire gauges, designed for screw termination applications. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing system maintenance and new design implementations. The CLIPLINE UK series connector operates within IEC ratings of 17.5 A at 500V and UL ratings of 15 A at 300V, with polyamide nylon insulation rated UL94 V-2.

Substiute Parts

0719032

Phoenix ContactIn Stock: 7780719032 Datasheet

Current PartRFQ

3003363

Phoenix ContactIn Stock: 9403003363 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Phoenix Contact 0719032 terminal block is determined by the following critical parameters:

• Electrical Compatibility: Matching wire gauge range (14-30 AWG / 0.14-1.5 mm²), current capacity (minimum 15 A UL / 17.5 A IEC), and voltage ratings (minimum 300V UL / 400V IEC)
• Mechanical Compatibility: Identical number of positions (2), levels (1), terminal width (4.2 mm), and screw termination style
• Physical Form Factor: Feed-through connector type with compatible stripping length requirements
• Material and Safety Compliance: Polyamide nylon insulation with acceptable flammability ratings (UL94 V-0 or V-2)

The Phoenix Contact 3003363 qualifies as a direct substitute based on these parameters, despite differences in series designation, color, and certain compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

The Phoenix Contact 3003363 serves as a functional equivalent to the obsolete 0719032 based on matching electrical and mechanical specifications. Key considerations for selection:

Electrical Performance: Both components maintain identical UL current and voltage ratings (15 A / 300V). The 3003363 operates at 400V IEC versus 500V IEC for the 0719032, remaining within acceptable operating margins for most applications requiring the original part.

Compliance Status: The 3003363 is classified as active product status with ROHS3 compliance, compared to the obsolete status of the 0719032. The substitute exhibits superior flammability performance (UL94 V-0 versus V-2), providing enhanced safety characteristics.

Physical Integration: Stripping length differs by 1 mm (6 mm versus 7 mm), requiring verification against specific installation procedures. Terminal width, position count, and screw termination remain identical, ensuring mechanical compatibility in existing mounting configurations.

Supply Continuity: The 3003363 maintains active inventory status with 856 units available, addressing supply chain concerns associated with the obsolete 0719032.

Frequently Asked Questions (FAQ)

Q: Can the Phoenix Contact 3003363 directly replace the 0719032 in existing applications?

A: Yes, the 3003363 qualifies as a direct substitute based on matching electrical ratings (15 A UL / 17.5 A IEC), voltage specifications (300V UL / 400V IEC minimum), wire gauge compatibility (14-30 AWG), and mechanical form factor (2-position, 1-level, 4.2 mm terminal width, screw termination). The 1 mm difference in stripping length (6 mm versus 7 mm) requires confirmation against installation specifications.

Q: What are the key differences between these two terminal blocks?

A: Primary differences include product status (active versus obsolete), series designation (CLIPLINE MT versus CLIPLINE UK), color coding (blue versus red), flammability rating (UL94 V-0 versus V-2), IEC voltage rating (400V versus 500V), and stripping length (6 mm versus 7 mm). Electrical performance and mechanical compatibility remain equivalent.

Q: Are there compliance or certification concerns when substituting the 3003363 for the 0719032?

A: The 3003363 provides enhanced compliance with ROHS3 certification and superior flammability performance (UL94 V-0). Both components maintain RoHS compliance and identical UL electrical ratings. The IEC voltage rating reduction from 500V to 400V does not impact applications operating at or below 400V.

Q: How does the stripping length difference affect installation?

A: The 3003363 requires 6 mm wire stripping compared to 7 mm for the 0719032. This 1 mm difference must be verified against equipment-specific installation procedures and wire preparation tooling to ensure proper termination and electrical contact.

Q: What is the packaging difference between these parts?

A: The 0719032 is supplied in standard packaging, while the 3003363 is available in bulk packaging. Bulk packaging typically accommodates higher-volume procurement requirements without affecting component specifications or performance.