Molex 0711095001 Card Edge Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0711095001 is a 220-position female card edge connector featuring dual edge configuration with 0.030" (0.76mm) pitch spacing. This connector is designed for through-hole solder termination applications requiring board guide and board lock features. The part is classified as obsolete, making identification of compatible substitute components essential for ongoing system support and new design implementations.

Substiute Parts

0711095001

MolexIn Stock: 7970711095001 Datasheet

Current PartRFQ

GBB110DHLR

Sullins Connector SolutionsIn Stock: 999GBB110DHLR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute compatibility for the Molex 0711095001 is determined by the following critical parameters:

• Number of Positions: 220 positions (fixed requirement)
• Gender: Female connector (fixed requirement)
• Card Configuration: Dual edge (fixed requirement)
• Card Thickness: 0.062" (1.57mm) (fixed requirement)
• Number of Rows: 2 rows (fixed requirement)
• Mounting Type: Through hole solder termination (fixed requirement)
• Contact Material & Finish: Phosphor bronze with gold plating (fixed requirement)

The Sullins Connector Solutions GBB110DHLR meets these core functional requirements while maintaining electrical and mechanical compatibility. Pitch spacing (0.030" vs 0.050") represents a design variation that does not preclude substitution when the card edge geometry and position count remain constant.

Parameter Comparison

Engineering Selection Recommendations

The Sullins Connector Solutions GBB110DHLR is the designated manufacturer-recommended substitute for the obsolete Molex 0711095001. Both connectors maintain ROHS3 compliance and meet the core electrical and mechanical requirements for 220-position dual-edge female card edge applications.

The GBB110DHLR offers extended operating temperature capability (-65°C to 125°C versus -40°C to 105°C), providing additional thermal margin for demanding applications. The connector is currently in active production status, ensuring long-term availability and supply chain continuity.

Selection of the GBB110DHLR is appropriate for applications where the original Molex part is no longer available or where extended temperature performance is beneficial.

Frequently Asked Questions (FAQ)

Q: Can the Sullins GBB110DHLR directly replace the Molex 0711095001 in existing designs?

A: The GBB110DHLR maintains compatibility with the core mechanical and electrical specifications of the 0711095001, including 220-position count, dual-edge configuration, 0.062" card thickness, and two-row layout. Both connectors use phosphor bronze contacts with gold plating and through-hole solder termination. Verification of pitch spacing compatibility with your specific card edge geometry is required, as the GBB110DHLR uses 0.050" pitch versus the 0711095001's 0.030" pitch.

Q: What is the difference in pitch spacing between these connectors?

A: The Molex 0711095001 features 0.030" (0.76mm) pitch spacing, while the Sullins GBB110DHLR uses 0.050" (1.27mm) pitch spacing. This difference affects the physical spacing of contact positions on the connector body and requires verification against your card edge design.

Q: Are both connectors RoHS compliant?

A: Yes, both the Molex 0711095001 and Sullins GBB110DHLR are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: What is the packaging format for the substitute part?

A: The Sullins GBB110DHLR is supplied in tube packaging, whereas the Molex 0711095001 packaging specification was not defined in the original documentation.

Q: Does the GBB110DHLR offer any performance advantages?

A: The GBB110DHLR provides an extended operating temperature range of -65°C to 125°C compared to the 0711095001's -40°C to 105°C range. The GBB110DHLR is also in active production status, ensuring ongoing availability and supply chain support.