06IB2S IEC 320-C14 Power Entry Connector Receptacle

Part Overview

The 06IB2S is an active AC power connector receptacle manufactured by Delta Electronics, designed for IEC 320-C14 panel mount applications. This filtered power entry module combines EMI/RFI filtering with integrated switch and fuse holder functionality, rated for 6A at 115/250VAC. The product is actively produced and widely stocked (821 units available), making it suitable for commercial equipment requiring standards-compliant power inlet solutions. Alternative equivalent parts are available from other manufacturers to support supply chain flexibility and procurement optimization.

Substiute Parts

06IB2S

Delta ElectronicsIn Stock: 84206IB2S Datasheet

Current PartRFQ

880-06/006

QualtekIn Stock: 3014880-06/006 Datasheet

SimilarRFQ

FN283-6-06

Schaffner EMC Inc.In Stock: 1067FN283-6-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 06IB2S is determined by strict electrical and mechanical compatibility criteria. All substitute parts must maintain the following core parameters:

• IEC 320-C14 connector style and receptacle configuration
• 6A current rating capability
• 115/250VAC voltage rating
• 3-position contact arrangement
• Commercial-grade EMI/RFI filtering
• On-Off switch functionality
• Panel mount flange configuration with quick connect termination
• Integrated fuse holder
• Panel cutout dimensions within tolerance (29.00mm x 60.00mm nominal)
• Active product status with current manufacturing support
• Compliance with CSA, UL, or equivalent international standards

Two equivalent parts meet these criteria: the Qualtek 880-06/006 and the Schaffner EMC Inc. FN283-6-06. Both maintain full electrical and mechanical compatibility with the 06IB2S while offering alternative sourcing options.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain active product status with current manufacturing support and full RoHS3 compliance. Selection between the 06IB2S, 880-06/006, and FN283-6-06 is based on availability, packaging preference, and regional certification requirements.

The 06IB2S (Delta Electronics) offers CSA, UL, and VDE certifications with 821 units in stock, packaged in bulk format. The 880-06/006 (Qualtek) provides identical electrical specifications with higher inventory availability (2974 units) in tray packaging, though panel cutout dimensions are 0.5mm wider at 29.50mm. The FN283-6-06 (Schaffner EMC Inc.) includes additional certifications (CQC, ENEC) and features front or rear side mount capability, with 1011 units available in tray packaging.

For applications requiring exact panel cutout compatibility without modification, the 06IB2S and FN283-6-06 are preferred due to matching 29.00mm dimensions. The 880-06/006 is suitable where panel cutout tolerance accommodates the 29.50mm width. All three parts satisfy commercial EMI/RFI filtering requirements and carry equivalent regulatory approvals for North American and European markets.

Frequently Asked Questions (FAQ)

Q: Can the 880-06/006 be used as a direct replacement for the 06IB2S?

A: The 880-06/006 is electrically and functionally equivalent to the 06IB2S. The primary difference is panel cutout dimension: 29.50mm versus 29.00mm. Direct panel mounting requires verification that the 0.5mm dimensional difference is within acceptable tolerance for your application. Both parts maintain identical current rating, voltage rating, filtering, and switch functionality.

Q: What are the key differences between the FN283-6-06 and the 06IB2S?

A: Both parts share identical IEC 320-C14 connector style, 6A current rating, 3-position configuration, and panel cutout dimensions (29.00mm x 60.00mm). The FN283-6-06 offers additional certifications (CQC, ENEC) and front or rear side mount flexibility. Termination is specified as 0.250" (6.3mm) quick connect on the FN283-6-06. Both are ROHS3 compliant and actively produced.

Q: Are all three parts compatible with the same fuse specifications?

A: All three parts include integrated fuse holders rated for 6A operation. Fuse selection must be based on your specific circuit protection requirements and equipment design. Fuses are not included with any of these parts and must be sourced separately.

Q: What packaging formats are available?

A: The 06IB2S is supplied in bulk packaging. The 880-06/006 and FN283-6-06 are both available in tray packaging. Packaging selection may affect procurement lead times and minimum order quantities.

Q: Which part should I select for European market applications?

A: The FN283-6-06 carries ENEC certification in addition to CSA and UL, making it suitable for direct European market deployment. The 06IB2S and 880-06/006 carry VDE certification. All three parts are ROHS3 compliant and REACH unaffected.

Q: Are there any mounting configuration differences between these parts?

A: All three parts are panel mount with flange configuration. The FN283-6-06 offers additional front or rear side mount capability. Panel cutout dimensions are 29.00mm x 60.00mm for the 06IB2S and FN283-6-06, and 29.50mm x 60.00mm for the 880-06/006.