06GEEW3V Power Entry Connector Equivalent & Substitute Parts

Part Overview

The 06GEEW3V is an IEC 320-C14 power entry connector receptacle manufactured by Delta Electronics, designed for AC power applications requiring filtered EMI/RFI protection. This panel-mount, right-angle connector accommodates 6A at 115/250VAC and is actively produced with full compliance certifications. Substitute parts are identified when equivalent electrical specifications, mechanical mounting configurations, and filtering characteristics align with the original design requirements.

Substiute Parts

06GEEW3V

Delta ElectronicsIn Stock: 90606GEEW3V Datasheet

Current PartRFQ

FN9226-6-06

Schaffner EMC Inc.In Stock: 1297FN9226-6-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 06GEEW3V is determined by the following critical parameters:

• Connector Style & Type: Must be IEC 320-C14 receptacle with male blades
• Electrical Ratings: Current rating of 6A and voltage rating of 115/250VAC
• Filtering: Commercial-grade EMI/RFI filtering at 6A minimum
• Mechanical Configuration: Panel mount, flange, right-angle orientation with 3 positions
• Compliance: Active product status with recognized approval agencies (CSA, UL, VDE, ENEC, SEMKO)

The FN9226-6-06 qualifies as a substitute based on matching connector style, position count, filter specifications, mounting configuration, and approval certifications. Differences in termination method (quick connect vs. wire leads) and panel cutout dimensions require mechanical validation during integration.

Parameter Comparison

Engineering Selection Recommendations

Both the 06GEEW3V and FN9226-6-06 maintain active product status with full regulatory compliance across CSA, UL, and additional European certifications (ENEC, SEMKO for the Schaffner part). Both are ROHS3 compliant and REACH unaffected, meeting current environmental standards.

Selection between these parts depends on termination requirements and panel integration constraints. The 06GEEW3V uses wire leads for direct soldering or crimping, while the FN9226-6-06 employs quick-connect terminals (0.250" / 6.3mm) for tool-free assembly. Panel cutout dimensions differ by approximately 3.9mm in width and 0.3mm in height, requiring mechanical validation against existing panel designs.

Frequently Asked Questions (FAQ)

Q: Can FN9226-6-06 directly replace 06GEEW3V in existing designs?

A: Electrical and filtering specifications are equivalent. However, termination method differs (quick connect vs. wire leads) and panel cutout dimensions vary. Mechanical integration must be validated before substitution.

Q: Are the filtering characteristics identical between these parts?

A: Both employ commercial-grade EMI/RFI filtering rated at 6A. Filtering performance is equivalent for the specified electrical parameters.

Q: What are the key differences between these connectors?

A: Primary differences are termination type (wire leads vs. quick connect) and panel cutout dimensions. Electrical ratings, connector style, and filtering specifications are identical.

Q: Do both parts meet the same regulatory standards?

A: Both are CSA and UL approved. The FN9226-6-06 carries additional ENEC and SEMKO certifications. Both are ROHS3 compliant and REACH unaffected.

Q: Which packaging format is available for each part?

A: 06GEEW3V is supplied in bulk packaging (828 pcs in stock). FN9226-6-06 is supplied in tray packaging (1229 pcs in stock).