Molex 0676008002 SD Card Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0676008002 is a 12-position (9 + 3) Secure Digital (SD) card connector designed for surface mount, right-angle applications. This connector features push-in/push-out ejection with gold-plated contacts and is classified as obsolete. Due to its obsolete status and limited availability relative to demand, identifying functionally equivalent substitute parts is essential for ongoing design support and production continuity.

Substiute Parts

0676008002

MolexIn Stock: 10860676008002 Datasheet

Current PartRFQ

5009980900

MolexIn Stock: 15365009980900 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the Molex 0676008002 is determined by the following critical parameters:

• Card Type: Secure Digital (SD) - must remain unchanged
• Number of Positions: 12 (9 + 3) configuration - must match exactly
• Connector Type: Connector with integrated ejector mechanism
• Insertion/Removal Method: Push-in/push-out operation
• Mounting Type: Surface mount, right-angle orientation
• Contact Finish: Gold plating for signal integrity and corrosion resistance
• Compliance: ROHS3 and REACH requirements

The Molex 5009980900 meets all these criteria and is designated as the manufacturer-recommended substitute. Both parts maintain identical electrical and mechanical compatibility for SD card interface applications.

Parameter Comparison

Engineering Selection Recommendations

The Molex 5009980900 is the designated manufacturer substitute for the obsolete 0676008002. Both connectors maintain full electrical and mechanical compatibility for SD card interface applications and satisfy ROHS3 and REACH compliance requirements.

The 5009980900 offers enhanced mechanical features including board guide and card guide elements, which provide improved card alignment and retention. The height differential of 0.012" (0.30mm) must be evaluated within the context of the specific PCB layout and enclosure design to ensure clearance compatibility.

Current inventory status indicates 1505 units of the 5009980900 are available, supporting production continuity. The Last Time Buy status of the substitute part necessitates long-term supply planning for future production requirements.

Frequently Asked Questions (FAQ)

Q: Can the Molex 5009980900 be used as a direct replacement for the 0676008002?

A: Yes. Both connectors share identical electrical specifications, SD card interface compatibility, and mechanical mounting characteristics. The substitute maintains full functional equivalence for push-in/push-out SD card connector applications.

Q: What is the significance of the height difference between these connectors?

A: The 0676008002 has a height of 0.110" (2.80mm) above the PCB, while the 5009980900 measures 0.122" (3.10mm). This 0.012" (0.30mm) difference must be verified against enclosure clearance specifications and mechanical assembly constraints during design validation.

Q: Are there compliance differences between these parts?

A: No. Both connectors are ROHS3 compliant and REACH unaffected, maintaining identical regulatory compliance status.

Q: What additional features does the 5009980900 provide?

A: The substitute includes integrated board guide and card guide features in addition to the switch mechanism present in the original part. These guides enhance mechanical stability and card insertion alignment.

Q: What is the supply status for each part?

A: The 0676008002 is classified as obsolete with limited remaining inventory. The 5009980900 is designated Last Time Buy, indicating it will be discontinued after current stock is exhausted. Both parts require supply chain planning for long-term production needs.