0630CDMCDDS-R82MC Equivalent & Substitute Parts

Part Overview

The 0630CDMCDDS-R82MC is a fixed shielded molded inductor manufactured by Sumida America Components Inc. with an inductance value of 820 nH, rated for 14.8 A continuous current, and a maximum DC resistance of 6 mOhm. This component is classified as Active product status and is designed for surface mount applications in compact form factors. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits selection from qualified alternatives that meet the same electrical and mechanical specifications within defined tolerances.

Substiute Parts

0630CDMCDDS-R82MC

Sumida America Components Inc.In Stock: 23350630CDMCDDS-R82MC Datasheet

Current PartRFQ

IHLP2525CZERR82M01

Vishay DaleIn Stock: 17058IHLP2525CZERR82M01 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 0630CDMCDDS-R82MC are qualified based on the following electrical and mechanical parameters:

Primary Substitution Criteria:

• Inductance value: 820 nH (within ±20% tolerance)
• Shielding type: Shielded construction
• Core material: Metal core
• Mounting type: Surface Mount (SMD)
• Operating temperature range: -55°C to 125°C minimum
• RoHS3 compliance status
• MSL rating: 1 (Unlimited)

Secondary Compatibility Parameters:

• Current rating: Minimum 13 A continuous (acceptable reduction from 14.8 A in specific applications)
• DC resistance: Maximum 8 mOhm (acceptable increase from 6 mOhm baseline)
• Saturation current: Minimum 24 A (acceptable increase from 19.5 A)
• Physical dimensions: Comparable footprint within SMD nonstandard package class
• Package format: Tape & Reel (TR)

The IHLP2525CZERR82M01 from Vishay Dale meets all primary criteria and falls within acceptable ranges for secondary parameters, qualifying it as a direct substitute.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (0630CDMCDDS-R82MC): Select the original Sumida America Components Inc. part when continuous current requirements reach 14.8 A and DC resistance must remain at or below 6 mOhm maximum. This part maintains Active product status with established supply chain availability (2294 pcs in stock). ROHS3 compliance and MSL 1 rating confirm suitability for standard manufacturing and storage conditions.

Substitute Selection (IHLP2525CZERR82M01): The Vishay Dale IHLP2525CZERR82M01 is qualified as a substitute when:

• Continuous current requirements do not exceed 13 A
• Application design tolerates DC resistance up to 8 mOhm maximum
• Footprint variation of approximately 0.14 mm in length and 0.13 mm in width is acceptable within PCB layout constraints

Both parts maintain identical inductance (820 nH ±20%), operating temperature range (-55°C to 125°C), shielding configuration, and compliance certifications (ROHS3, MSL 1). The substitute part demonstrates higher saturation current (24 A vs. 19.5 A), providing additional margin in transient current scenarios. Active product status and substantial inventory (17018 pcs) confirm ongoing manufacturer support and availability.

Frequently Asked Questions (FAQ)

Q1: Can the IHLP2525CZERR82M01 replace the 0630CDMCDDS-R82MC in all applications?

A: No. The substitute part is rated for 13 A continuous current versus 14.8 A for the original part. Substitution is valid only when application current requirements remain at or below 13 A. Additionally, the substitute exhibits 8 mOhm maximum DC resistance compared to 6 mOhm for the original, resulting in higher power dissipation. Verify that thermal and power loss budgets accommodate this increase.

Q2: Are there dimensional compatibility concerns when substituting these parts?

A: The parts exhibit minor dimensional differences: the substitute (6.86 x 6.47 mm) is slightly smaller than the original (7.00 x 6.60 mm). Both maintain identical 3.00 mm seated height. These variations fall within acceptable tolerances for SMD nonstandard package classes. Verify PCB footprint design accommodates the substitute dimensions; in most cases, the smaller footprint presents no compatibility issues.

Q3: Do both parts meet the same compliance and environmental standards?

A: Yes. Both the 0630CDMCDDS-R82MC and IHLP2525CZERR82M01 are ROHS3 compliant, carry MSL 1 (Unlimited) moisture sensitivity ratings, and operate across the identical temperature range (-55°C to 125°C). Both are tested at 100 kHz inductance frequency. Compliance certifications are equivalent.

Q4: What is the impact of the 2 mOhm increase in DC resistance when using the substitute?

A: The IHLP2525CZERR82M01 exhibits 8 mOhm maximum DCR versus 6 mOhm for the original part. At 13 A continuous current, this represents an additional power dissipation of approximately 2.6 mW (calculated as I²R differential: 13² × 0.002 = 3.38 mW). Evaluate thermal design to confirm this increase remains within acceptable limits for your application.

Q5: Are saturation current differences significant for substitution?

A: The substitute part (24 A Isat) exhibits higher saturation current than the original (19.5 A Isat). This provides additional margin during transient overcurrent events and is not a limiting factor for substitution. The higher saturation rating does not negatively impact performance in applications designed for the original part's 19.5 A saturation specification.

Q6: What packaging formats are available for both parts?

A: Both parts are supplied in Tape & Reel (TR) format, standard for automated assembly processes. This packaging format is identical between the original and substitute, eliminating any supply chain or handling procedure differences.