0630CDMCDDS-R10MC Equivalent & Substitute Parts

Part Overview

The 0630CDMCDDS-R10MC is a 100 nH shielded molded inductor manufactured by Sumida America Components Inc. in surface mount configuration. This component is classified as Active product status and is designed for applications requiring fixed inductance with electromagnetic shielding in compact form factors. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when inventory requirements necessitate alternative suppliers while maintaining electrical and mechanical compatibility.

Substiute Parts

0630CDMCDDS-R10MC

Sumida America Components Inc.In Stock: 13310630CDMCDDS-R10MC Datasheet

Current PartRFQ

IHLP2525CZERR10M01

Vishay DaleIn Stock: 35188IHLP2525CZERR10M01 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the 0630CDMCDDS-R10MC are qualified based on the following critical parameters:

Electrical Compatibility Criteria:

• Inductance value: 100 nH (exact match required)
• Inductance tolerance: ±20% (matching specification)
• Inductance test frequency: 100 kHz (matching test condition)
• Shielding type: Shielded (electromagnetic containment requirement)
• Operating temperature range: -55°C ~ 125°C (thermal envelope match)

Mechanical Compatibility Criteria:

• Mounting type: Surface Mount (PCB assembly compatibility)
• Package type: Nonstandard form factor (physical footprint consideration)
• Height - Seated (Max): 0.118" (3.00mm) (clearance and assembly constraint)

Compliance Criteria:

• RoHS3 Compliant (regulatory requirement)
• Moisture Sensitivity Level: 1 (handling and storage compatibility)
• Packaging format: Tape & Reel (TR) (automated assembly compatibility)

The IHLP2525CZERR10M01 from Vishay Dale meets all electrical and mechanical substitution criteria while providing additional performance specifications including defined current rating and DC resistance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the 0630CDMCDDS-R10MC and IHLP2525CZERR10M01 are Active product status components with full ROHS3 compliance and identical moisture sensitivity classification. Selection between these parts is based on the following engineering considerations:

Primary Part (0630CDMCDDS-R10MC): Use when Sumida America Components Inc. supply chain is preferred or when the specific nonstandard package dimensions (0.276" L x 0.260" W) are required for existing PCB layouts.

Substitute Part (IHLP2525CZERR10M01): Use when Vishay Dale supply chain provides better availability or cost efficiency. This substitute provides additional electrical specifications including defined DC resistance (1.7 mOhm Max) and current ratings (32.5 A / 60 A saturation), which may be beneficial for applications requiring thermal or current performance verification. The slightly smaller footprint (0.270" L x 0.255" W) may provide minor layout advantages.

Both parts maintain identical electrical performance at the specified 100 kHz test frequency and operate within the same thermal envelope. Component selection should be based on supply chain availability, inventory status, and PCB layout constraints.

Frequently Asked Questions (FAQ)

Q: Can the IHLP2525CZERR10M01 directly replace the 0630CDMCDDS-R10MC on existing PCBs?

A: Yes, with physical verification. Both components have identical height (0.118" / 3.00mm) and operate at the same inductance value (100 nH) with matching tolerance (±20%). However, the footprint dimensions differ slightly (0.276" x 0.260" vs. 0.270" x 0.255"). Verify that the substitute part's dimensions fit within the existing pad layout before assembly.

Q: Are there electrical performance differences between these parts?

A: Both parts are electrically equivalent at the specified 100 kHz test frequency with identical inductance and tolerance specifications. The IHLP2525CZERR10M01 provides additional performance data (DC resistance and current ratings) that are not specified for the 0630CDMCDDS-R10MC. These additional specifications do not affect substitution compatibility but may provide additional design margin information.

Q: What are the packaging and handling requirements for these inductors?

A: Both parts are classified as Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling. Both are supplied in Tape & Reel (TR) format suitable for automated assembly processes. Standard ESD precautions apply during component handling.

Q: Are both parts compliant with current regulatory requirements?

A: Yes. Both the 0630CDMCDDS-R10MC and IHLP2525CZERR10M01 are ROHS3 Compliant. The IHLP2525CZERR10M01 additionally carries REACH Unaffected status. Both parts are classified under ECCN EAR99 and HTSUS 8504.50.4000.

Q: What is the difference between the core materials?

A: The 0630CDMCDDS-R10MC specifies Metal core material. The IHLP2525CZERR10M01 core material is not specified in the provided data. Both parts are shielded molded inductors with equivalent electromagnetic containment characteristics.