06123C224MAT2V Equivalent & Substitute Parts

Part Overview

The 06123C224MAT2V is a 0.22 µF ceramic capacitor manufactured by KYOCERA AVX, rated for 25V with X7R temperature coefficient characteristics. This surface mount multilayer ceramic capacitor (MLCC) is designed for bypass and decoupling applications in electronic circuits. The part features low ESL (reverse geometry) construction and operates across the temperature range of -55°C to 125°C. As an active product with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), substitute parts may be required due to inventory availability, lead time optimization, or specific tolerance requirements in production environments.

Substiute Parts

06123C224MAT2V

KYOCERA AVXIn Stock: 120806123C224MAT2V Datasheet

Current PartRFQ

KGL31CR71E224KU

KYOCERA AVXIn Stock: 3073KGL31CR71E224KU Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 06123C224MAT2V is permissible when the following core electrical and mechanical parameters remain constant or are improved:

• Capacitance value: 0.22 µF (exact match required)
• Voltage rating: 25V (minimum requirement; higher ratings acceptable)
• Temperature coefficient: X7R (required for stable performance across operating range)
• Package / Case: 0612 (1632 Metric) (physical compatibility requirement)
• Mounting type: Surface Mount, MLCC (assembly compatibility requirement)
• Operating temperature range: -55°C ~ 125°C (minimum requirement)
• RoHS compliance: ROHS3 Compliant (regulatory requirement)
• Moisture sensitivity: MSL 1 (handling and storage compatibility)

The substitute part KGL31CR71E224KU meets all substitution criteria. The tolerance specification (±10% versus ±20%) represents an upgrade in accuracy and does not prevent substitution. Physical dimensions remain compatible within the 0612 package specification.

Parameter Comparison

Engineering Selection Recommendations

The KGL31CR71E224KU is a direct substitute for the 06123C224MAT2V. Both parts are active products from KYOCERA AVX with identical regulatory compliance (ROHS3 Compliant, REACH Unaffected, EAR99 classification). The substitute part offers improved tolerance specification (±10% versus ±20%), which provides enhanced capacitance accuracy without introducing any compatibility issues. Physical dimensions and electrical characteristics remain functionally equivalent for bypass and decoupling applications. Selection between these parts should be based on availability, lead time requirements, and tolerance specifications needed for the specific application circuit.

Frequently Asked Questions (FAQ)

Q: Can KGL31CR71E224KU replace 06123C224MAT2V in existing designs?

A: Yes. Both parts share identical capacitance (0.22 µF), voltage rating (25V), temperature coefficient (X7R), package (0612), and operating temperature range (-55°C ~ 125°C). The substitute part features tighter tolerance (±10% versus ±20%), which is an improvement and does not affect compatibility.

Q: Are there physical dimension differences between these parts?

A: Both parts conform to the 0612 (1632 Metric) package specification with identical length and width (0.063" L x 0.126" W). Maximum thickness differs slightly (0.037" versus 0.040"), but both values fall within acceptable 0612 package tolerances and do not affect PCB assembly or clearance requirements.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes. Both carry HTSUS code 8532.24.0020 and MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the primary advantage of the substitute part?

A: The KGL31CR71E224KU provides tighter capacitance tolerance (±10% versus ±20%), resulting in more precise capacitance values across production batches. This is beneficial for applications requiring stricter component specifications.

Q: Are these parts interchangeable for tape and reel packaging?

A: Yes. Both parts are supplied in Tape & Reel (TR) packaging format, maintaining compatibility with automated assembly equipment and handling procedures.