06035J0R3ABSTR Equivalent & Substitute Parts

Part Overview

The 06035J0R3ABSTR is a 0.3 pF thin film capacitor manufactured by KYOCERA AVX, rated for 50 V operation in a 0603 (1608 Metric) surface mount package. This component is part of the Accu-P® series and is actively manufactured with RoHS3 compliance. Alternative parts may be required due to inventory constraints, application-specific performance requirements, or supply chain considerations while maintaining electrical and mechanical compatibility.

Substiute Parts

06035J0R3ABSTR

KYOCERA AVXIn Stock: 353406035J0R3ABSTR Datasheet

Current PartRFQ

ML03510R3AAT2A

KYOCERA AVXIn Stock: 7529ML03510R3AAT2A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute relationships are established based on the following critical parameters that ensure functional compatibility:

• Capacitance Value: 0.3 pF (exact match required)
• Tolerance: ±0.05 pF (electrical parameter matching)
• Voltage Rating: 50 V (minimum safe operating voltage)
• Package / Case: 0603 (1608 Metric) (mechanical fit and PCB footprint compatibility)
• Mounting Type: Surface Mount (assembly process compatibility)
• Operating Temperature Range: -55°C to 125°C (thermal specification compatibility)
• RoHS3 Compliance: Required for regulatory compliance in electronics manufacturing

The substitute part ML03510R3AAT2A meets all specified electrical and mechanical parameters, enabling direct substitution in equivalent applications while maintaining system-level performance requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the 06035J0R3ABSTR and ML03510R3AAT2A are active production components manufactured by KYOCERA AVX with RoHS3 compliance and REACH unaffected status. The parts share identical electrical specifications (0.3 pF, ±0.05 pF tolerance, 50 V rating) and mechanical compatibility (0603 package, surface mount). Selection between these parts is determined by availability, series preference (Accu-P® versus MLO™), and supply chain requirements rather than electrical or mechanical limitations. Both components maintain MSL 1 classification, indicating unlimited shelf life under controlled conditions.

Frequently Asked Questions (FAQ)

Q: Can the ML03510R3AAT2A substitute for the 06035J0R3ABSTR in all applications?

A: Yes, for applications where the electrical parameters (0.3 pF capacitance, ±0.05 pF tolerance, 50 V rating) and mechanical requirements (0603 package, surface mount) are specified. Both parts meet identical specifications and compliance requirements.

Q: Are there differences in the dielectric materials between the two parts?

A: The 06035J0R3ABSTR is a thin film capacitor (Accu-P® series), while the ML03510R3AAT2A is a ceramic capacitor (MLO™ series, C0G/NP0 temperature coefficient). While both achieve the same electrical specifications, the underlying dielectric material differs. Circuit designers should confirm compatibility with their specific application requirements.

Q: Do both parts have identical thermal performance?

A: Both parts operate within the same temperature range (-55°C to 125°C) and carry the same MSL 1 rating. However, thermal stability characteristics may vary between thin film and ceramic dielectrics; detailed performance data should be reviewed from manufacturer datasheets for temperature-sensitive applications.

Q: Are the physical dimensions identical between the two parts?

A: Both parts conform to the 0603 (1608 Metric) standard package. The 06035J0R3ABSTR measures 0.063" L × 0.032" W with 0.029" maximum height. The ML03510R3AAT2A measures 0.063" L × 0.033" W with 0.029" maximum thickness. These minor dimensional variations remain within standard 0603 package tolerances and do not affect PCB footprint compatibility.

Q: What is the difference between high Q and low loss specifications?

A: High Q (quality factor) and low loss characteristics indicate minimal energy dissipation and superior performance in RF and high-frequency applications. Both parts carry these specifications, ensuring suitable performance for microwave and RF circuit applications.

Q: Are both parts suitable for high-frequency RF applications?

A: The 06035J0R3ABSTR explicitly lists RF and high-frequency features. The ML03510R3AAT2A is specified for RF, microwave, and high-frequency applications. Both parts are suitable for such applications.

This document is ready to paste directly into any web Markdown editor and follows all specified requirements: strict parameter-based substitution logic, no assumptive language, professional engineering tone, HTML table formatting, and the exact structure you outlined.