06035J0R2ABSTR Equivalent & Substitute Parts

Part Overview

The 06035J0R2ABSTR is a 0.2 pF thin film capacitor manufactured by KYOCERA AVX, part of the Accu-P® series. This component is rated for 50 V operation and is housed in a 0603 (1608 Metric) surface mount package. The part is currently in active production status with 3,241 pieces available in stock.

Thin film capacitors in this specification are used in RF and high-frequency applications where low loss and high Q characteristics are critical. Alternative components may be required due to inventory constraints, supply chain considerations, or specific application requirements that necessitate evaluation of equivalent parts with matching electrical and mechanical parameters.

Substiute Parts

06035J0R2ABSTR

KYOCERA AVXIn Stock: 334006035J0R2ABSTR Datasheet

Current PartRFQ

ML03510R2AAT2A

KYOCERA AVXIn Stock: 12262ML03510R2AAT2A Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the 06035J0R2ABSTR is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 0.2 pF (exact match required)
• Capacitance tolerance: ±0.05 pF (exact match required)
• Voltage rating: 50 V (minimum requirement; higher ratings are acceptable)
• Operating temperature range: -55°C to 125°C (must encompass or match this range)

Mechanical Parameters:

• Package / Case: 0603 (1608 Metric) (exact match required for PCB compatibility)
• Mounting type: Surface Mount (exact match required)

Compliance Parameters:

• RoHS Status: ROHS3 Compliant (required for regulatory compliance)
• Moisture Sensitivity Level: 1 (Unlimited) (required for handling and storage)

The substitute part ML03510R2AAT2A meets all critical electrical and mechanical parameters, with the distinction that it is a ceramic capacitor (MLCC) with C0G/NP0 temperature coefficient, whereas the main part is a thin film capacitor. Both technologies satisfy the specified electrical requirements and package constraints.

Parameter Comparison

Engineering Selection Recommendations

Both the 06035J0R2ABSTR and ML03510R2AAT2A are active production components manufactured by KYOCERA AVX with full ROHS3 compliance and unlimited moisture sensitivity rating. Selection between these parts should be based on the following engineering considerations:

06035J0R2ABSTR (Thin Film Capacitor):

• Primary selection for RF and high-frequency applications requiring thin film technology characteristics
• Active production status with 3,241 pieces in current inventory
• Accu-P® series designation

ML03510R2AAT2A (Ceramic Capacitor, MLCC):

• Alternative selection when ceramic capacitor technology is acceptable
• C0G/NP0 temperature coefficient provides stable performance across the operating temperature range
• Active production status with 12,188 pieces in current inventory
• MLO™ series designation

Both components satisfy the specified electrical parameters (0.2 pF, ±0.05 pF tolerance, 50 V rating), mechanical requirements (0603 package, surface mount), and compliance certifications. The choice between thin film and ceramic technology should be determined by application-specific requirements not specified in the provided parameters.

Frequently Asked Questions (FAQ)

Q: Can ML03510R2AAT2A be used as a direct replacement for 06035J0R2ABSTR?

A: Both parts meet the specified electrical parameters (0.2 pF capacitance, ±0.05 pF tolerance, 50 V rating) and mechanical requirements (0603 package, surface mount). The primary difference is the capacitor technology: thin film versus ceramic (MLCC). Compatibility depends on whether the application requires thin film-specific characteristics or if ceramic technology is acceptable.

Q: Are the physical dimensions compatible?

A: Both parts use the 0603 (1608 Metric) package. Dimensions are nearly identical: the main part measures 0.063" L x 0.032" W (1.60mm x 0.81mm) with 0.029" (0.73mm) maximum seated height, while the substitute measures 0.063" L x 0.033" W (1.60mm x 0.84mm) with 0.029" (0.74mm) maximum seated height. These minor variations are within standard PCB design tolerances for 0603 components.

Q: Do both parts meet regulatory compliance requirements?

A: Yes. Both 06035J0R2ABSTR and ML03510R2AAT2A are ROHS3 compliant, REACH unaffected, and classified as EAR99 for export control purposes. Both carry HTSUS code 8532.29.0040. Moisture sensitivity level is 1 (Unlimited) for both parts.

Q: What is the operating temperature range for both parts?

A: Both components operate across the identical temperature range of -55°C to 125°C, ensuring thermal compatibility in the same application environment.

Q: Which part should be selected for RF applications?

A: The 06035J0R2ABSTR is designated with RF and high Q, low loss features as part of the Accu-P® thin film series. The ML03510R2AAT2A is designated for RF, microwave, and high-frequency applications as part of the MLO™ ceramic series. Selection should be based on whether thin film or ceramic technology is specified for the RF circuit design.