LINE FILTER 05DRCG5 - Equivalent & Substitute Parts

Part Overview

The Delta Electronics 05DRCG5 is a single-phase EMC/EMI line filter rated for 115V/250VAC at 5A with two-stage configuration and quick connect termination. This chassis-mount filter is designed for general-purpose applications requiring electromagnetic compatibility filtering across 50/60Hz power systems. The part maintains active product status with full compliance to CSA, UR, and VDE approval agencies. Substitute parts are identified when inventory constraints, regional availability, or specific voltage/current requirements necessitate alternative sourcing while maintaining equivalent electrical and mechanical performance.

Substiute Parts

05DRCG5

Delta ElectronicsIn Stock: 107105DRCG5 Datasheet

Current PartRFQ

6609031-9

TE Connectivity Corcom FiltersIn Stock: 8696609031-9 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 05DRCG5 is determined by the following critical parameters:

• Filter Type & Configuration: Single Phase, Two Stage architecture
• Current Rating: 5 A nominal capacity
• Frequency Compatibility: 50/60Hz operation
• Mounting & Termination: Chassis Mount with Quick Connect interface
• Regulatory Compliance: CSA, UR, VDE certifications required
• Voltage Rating: Minimum 250VAC capability (primary operating voltage)

The TE Connectivity Corcom Filters model 6609031-9 qualifies as a substitute based on matching filter type, configuration, current rating, frequency range, mounting method, termination style, and regulatory approvals. Voltage rating differences are noted in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Both the 05DRCG5 and 6609031-9 maintain active product status with identical regulatory certifications (CSA, UR, VDE) and RoHS3 compliance. Selection between these parts should be based on application-specific requirements:

05DRCG5 Selection Criteria: Applications requiring dual voltage operation (115V/250VAC) or extended operating temperature range (-25°C to 100°C) necessitate the Delta Electronics part. Higher inductance value (1.6mH) provides enhanced filtering characteristics for sensitive equipment.

6609031-9 Selection Criteria: Applications operating exclusively at 250VAC with standard industrial temperature ranges (-10°C to 40°C) may utilize the TE Connectivity Corcom substitute. Lower inductance (1.032mH) is suitable for applications with less stringent filtering requirements.

Both parts share identical current rating (5A), frequency compatibility (50/60Hz), mounting configuration (Chassis Mount), and termination interface (Quick Connect), ensuring mechanical and electrical interchangeability within their respective operating parameters.

Frequently Asked Questions (FAQ)

Q: Can the 6609031-9 replace the 05DRCG5 in all applications?

A: The 6609031-9 is suitable for replacement in applications operating at 250VAC within the -10°C to 40°C temperature range. Applications requiring 115VAC operation or extended temperature performance (-25°C to 100°C) must use the 05DRCG5.

Q: What is the significance of the inductance difference between these parts?

A: The 05DRCG5 provides 1.6mH inductance compared to 1.032mH in the 6609031-9. Higher inductance delivers superior EMI/EMC filtering performance. Selection depends on application filtering requirements and system sensitivity specifications.

Q: Are both parts mechanically compatible with existing installations?

A: Yes. Both parts feature identical Chassis Mount configuration and Quick Connect termination, ensuring direct mechanical compatibility with existing mounting and wiring interfaces.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both the 05DRCG5 and 6609031-9 carry CSA, UR, and VDE certifications and maintain ROHS3 compliance, meeting equivalent regulatory requirements for industrial and commercial applications.

Q: What is the primary difference between these substitute parts?

A: The primary differences are voltage rating (05DRCG5 supports 115V/250V versus 6609031-9 at 250V only), operating temperature range (05DRCG5: -25°C to 100°C versus 6609031-9: -10°C to 40°C), and inductance value (1.6mH versus 1.032mH). Current rating, frequency, mounting, and termination are identical.