Equivalent & Substitute Parts: Molex 0532618607

Part Overview

The Molex 0532618607 is a rectangular connector header positioned for board-to-cable/wire applications within the PicoBlade 53261 series. This component is classified as obsolete, indicating it is no longer in active production. The identification of equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing manufacturing and repair operations for systems utilizing this connector.

Substiute Parts

0532618607

MolexIn Stock: 11410532618607 Datasheet

Current PartRFQ

0532614007

MolexIn Stock: 9170532614007 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the obsolete Molex 0532618607 is determined by strict alignment of the following electrical and mechanical parameters:

Critical Substitution Parameters:

• Connector category: Rectangular Connectors
• Series compatibility: PicoBlade 53261
• Base product number: 053261
• Pitch specification: 0.049" (1.25mm)
• Number of positions: 7
• Number of rows: 1
• Connector type: Header
• Style: Board to Cable/Wire

The substitute part Molex 0532614007 satisfies all critical parameters while offering the advantage of active product status and current manufacturing availability. The primary distinction between the main part and substitute is the mounting configuration: the substitute employs surface mount, right-angle orientation with solder termination, whereas the original part designation indicates a through-hole or alternative mounting approach.

Parameter Comparison

Engineering Selection Recommendations

The Molex 0532614007 serves as the active substitute for the obsolete Molex 0532618607 based on the following engineering criteria:

Product Status Alignment: The substitute part maintains active product status within the PicoBlade 53261 series, ensuring continued availability from Molex and compatibility with current supply chain operations.

Electrical Compliance: Both parts operate within the same connector category and series framework, with identical pitch (0.049" / 1.25mm) and position configuration (7-position, single-row). The substitute provides specified electrical ratings of 125VAC/DC, supporting standard industrial and consumer applications.

Mechanical Compatibility: The substitute employs surface mount, right-angle mounting with solder termination. Design integration requires verification that the PCB layout and mating connector accommodate the right-angle orientation and surface mount footprint of the substitute part.

Regulatory Compliance: The substitute part carries UL94 V-0 flammability certification, meeting standard safety requirements for electronic connectors in regulated applications.

Environmental Performance: The substitute operates across the temperature range of -40°C to 105°C, suitable for industrial and commercial environments.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0532614007 directly replace the Molex 0532618607 in existing designs?

A: Both parts share the same series designation (PicoBlade 53261), pitch specification (0.049" / 1.25mm), and 7-position, single-row configuration. However, the substitute employs surface mount, right-angle mounting, whereas the original part designation does not specify mounting type. PCB layout compatibility must be confirmed before implementation.

Q: What is the primary reason for substitution?

A: The Molex 0532618607 is classified as obsolete and no longer in active production. The Molex 0532614007 is an active product within the same series, ensuring supply chain continuity and manufacturing support.

Q: Are there electrical performance differences between these parts?

A: Both parts operate within the PicoBlade 53261 connector series with identical pitch and position specifications. The substitute provides specified electrical ratings (125VAC/DC) and operates across -40°C to 105°C. The original part specifications do not include detailed electrical parameters.

Q: What packaging format is available for the substitute part?

A: The Molex 0532614007 is supplied in Tape & Reel (TR) packaging, standard for surface mount components in high-volume manufacturing environments.

Q: Does the substitute part include shrouding?

A: Yes, the Molex 0532614007 features 4-wall shrouding, providing mechanical protection and alignment guidance during mating operations.

Q: What contact materials are used in the substitute part?

A: The substitute employs phosphor bronze contacts with gold plating on the mating surface and tin plating on the post termination, ensuring reliable electrical connection and corrosion resistance.