Equivalent & Substitute Parts for Delta Electronics 04BEEG3H

Part Overview

The Delta Electronics 04BEEG3H is an IEC 320-C14 power entry connector receptacle module designed for panel mount applications. This filtered power entry module accommodates a fuse and provides EMI/RFI filtering for commercial applications. The part is currently active in production with 954 units in stock. Equivalent and substitute parts are identified when design requirements, supply constraints, or application specifications necessitate alternative sourcing options that maintain functional compatibility within the specified electrical and mechanical parameters.

Substiute Parts

04BEEG3H

Delta ElectronicsIn Stock: 99704BEEG3H Datasheet

Current PartRFQ

860-04/002

QualtekIn Stock: 840860-04/002 Datasheet

DirectRFQ

FN261-4-06

Schaffner EMC Inc.In Stock: 980FN261-4-06 Datasheet

SimilarRFQ

6EGG1-1

TE Connectivity Corcom FiltersIn Stock: 28946EGG1-1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 04BEEG3H is determined by the following critical parameters:

• Connector Style: IEC 320-C14 (mandatory match)
• Connector Type: Receptacle, Male Blades - Module (mandatory match)
• Number of Positions: 3 (mandatory match)
• Mounting Type: Panel Mount, Flange (mandatory match)
• Filter Type: Filtered (EMI, RFI) - Commercial (mandatory match)
• Fuse Accommodation: Yes (mandatory match)
• Termination: Quick Connect (mandatory match)
• Approval Agencies: CSA, UL, VDE (mandatory match)
• RoHS Status: ROHS3 Compliant (mandatory match)

Current rating and voltage rating variations are permissible when the substitute part meets or exceeds the main part specifications. Panel cutout dimension tolerances within manufacturing standards are acceptable. All identified substitutes meet these criteria and are classified as direct or similar equivalents based on parameter alignment.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are active products with full regulatory compliance. Selection between the main part and substitutes is based on the following criteria:

860-04/002 (Qualtek): Direct equivalent with identical electrical ratings (4A, 115/250VAC) and panel cutout dimensions within manufacturing tolerance. Packaging differs (Tray vs. Bulk). Suitable for applications requiring Qualtek sourcing or when Qualtek inventory availability is prioritized.

FN261-4-06 (Schaffner EMC Inc.): Similar equivalent with expanded regulatory approvals (CQC, ENEC added to CSA, UL, VDE). Material flammability rating specified as UL94 V-2 and ingress protection rated IP40. Electrical ratings not specified in available data. Suitable for applications requiring enhanced environmental protection or expanded international certifications.

6EGG1-1 (TE Connectivity Corcom Filters): Similar equivalent with higher current rating (6A) and voltage range (120/250VAC). Highest inventory availability (2,787 units). Suitable for applications where higher current capacity is required or when TE Connectivity sourcing is specified.

All parts maintain IEC 320-C14 compliance, filtered EMI/RFI commercial-grade design, and fuse accommodation. Panel cutout dimensions are within acceptable manufacturing tolerances across all options.

Frequently Asked Questions (FAQ)

Q: Can 860-04/002 be used as a direct replacement for 04BEEG3H?

A: Yes. The Qualtek 860-04/002 is a direct equivalent with matching electrical ratings (4A, 115/250VAC), connector configuration, and panel cutout dimensions. The primary difference is packaging format (Tray vs. Bulk).

Q: What is the difference between FN261-4-06 and the main part?

A: FN261-4-06 is a similar equivalent with identical mechanical specifications and filter type. It includes additional regulatory approvals (CQC, ENEC) and specifies material flammability (UL94 V-2) and ingress protection (IP40). Electrical ratings are not specified in available documentation.

Q: Can 6EGG1-1 replace 04BEEG3H in a 4A application?

A: Yes. The 6EGG1-1 has a higher current rating (6A) and voltage range (120/250VAC), making it suitable for applications designed for 4A at 115/250VAC. The higher rating provides design margin without compromising compatibility.

Q: Are panel cutout dimensions identical across all parts?

A: Panel cutout dimensions are within manufacturing tolerance. The main part and FN261-4-06 specify 29.00mm x 33.00mm. The 860-04/002 and 6EGG1-1 specify 28.96mm x 33.02mm. These variations are within standard mechanical tolerances for panel mount applications.

Q: Do all parts accommodate fuses?

A: Yes. All parts include fuse holder accommodation. Fuses are not included with any part and must be sourced separately according to application requirements.

Q: What regulatory approvals apply to each part?

A: The main part (04BEEG3H), 860-04/002, and 6EGG1-1 carry CSA, UL, and VDE approvals. FN261-4-06 carries CQC, CSA, ENEC, and UL approvals, providing broader international certification coverage.