HDMI Receptacle Connector 0471511041 Equivalent & Substitute Parts

Part Overview

The Molex 0471511041 is an HDMI receptacle connector with 19 positions, designed for surface mount and through-hole applications with right-angle orientation. This component is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning. The connector features a horizontal mounting configuration with solder termination and detent lock functionality.

Substiute Parts

0471511041

MolexIn Stock: 11040471511041 Datasheet

Current PartRFQ

1747981-1

TE Connectivity AMP ConnectorsIn Stock: 56031747981-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for HDMI receptacle connectors is determined by the following critical parameters:

• Connector type must be HDMI
• Contact count must be 19 positions
• Gender must be receptacle
• Termination method must be solder
• Mounting orientation must support right-angle configuration
• Contact finish must be gold
• Shielding requirement must be met
• Voltage and current ratings must meet or exceed the original specification
• Operating temperature range must be compatible with application requirements
• RoHS3 compliance must be maintained

The TE Connectivity AMP Connectors part 1747981-1 satisfies these substitution criteria as an active product with equivalent electrical and mechanical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The TE Connectivity 1747981-1 is the designated substitute for the obsolete Molex 0471511041. Both connectors maintain ROHS3 compliance and identical MSL ratings. The substitute part is currently in active production status with higher inventory availability (5562 units in stock versus 1054 units for the original part).

Key considerations for selection:

The substitute part supports panel mount configuration in addition to surface mount and through-hole options, providing greater application flexibility. The operating temperature range of the substitute (-25°C to 70°C) is narrower than the original (-20°C to 85°C); applications requiring operation above 70°C or below -25°C must retain the original part specification if available. The voltage rating specification differs (40V AC versus 40V DC); verify application voltage characteristics before substitution. Both parts are rated for 0.5A current and feature gold-plated contacts with copper alloy shielding.

Frequently Asked Questions (FAQ)

Q: Can the TE Connectivity 1747981-1 be used as a direct replacement for the Molex 0471511041?

A: The TE Connectivity 1747981-1 is functionally equivalent for applications operating within -25°C to 70°C and using 40V AC voltage. Applications requiring the full -20°C to 85°C temperature range or 40V DC operation must evaluate compatibility based on specific application requirements.

Q: What is the difference between the mounting types listed for each connector?

A: The Molex 0471511041 supports surface mount and through-hole configurations. The TE Connectivity 1747981-1 adds panel mount capability, allowing installation directly into panel cutouts. All three mounting methods are compatible with right-angle horizontal orientation.

Q: Are both connectors RoHS compliant?

A: Both the Molex 0471511041 and TE Connectivity 1747981-1 are ROHS3 compliant with MSL rating 1 (unlimited moisture sensitivity level).

Q: What is the mating cycle rating for these connectors?

A: The Molex 0471511041 does not specify a mating cycle rating. The TE Connectivity 1747981-1 is rated for 10000 mating cycles.

Q: How do the packaging options differ?

A: The Molex 0471511041 packaging is not specified. The TE Connectivity 1747981-1 is supplied in Cut Tape (CT) packaging.