HDMI Receptacle Connector 0471511002 Equivalent & Substitute Parts

Part Overview

The Molex 0471511002 is a 19-position HDMI receptacle connector designed for surface mount and through-hole applications with right-angle orientation. This connector features a shielded design with gold-plated contacts and operates across a temperature range of -20°C to 85°C. The part is currently classified as obsolete, making identification of functionally equivalent alternatives essential for ongoing design support and component procurement.

Substiute Parts

0471511002

MolexIn Stock: 10350471511002 Datasheet

Current PartRFQ

2086581002

MolexIn Stock: 219432086581002 Datasheet

DirectRFQ

1-1747981-1

TE Connectivity AMP ConnectorsIn Stock: 24451-1747981-1 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0471511002 is determined by strict alignment with core electrical and mechanical parameters. All substitute parts must maintain the following critical specifications:

• 19-position HDMI receptacle configuration
• Solder termination method
• Gold-plated contact finish
• ROHS3 compliance
• Shielded design
• Operating voltage of 40V or greater
• Current rating of 0.5A or greater

The two identified substitutes meet these baseline requirements but differ in specific implementation details related to mounting configuration, shell material composition, and operational temperature ranges. These differences are documented in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Molex 2086581002 is the primary direct substitute for the 0471511002. Both parts are manufactured by Molex, share identical mounting configurations, and maintain the same operating temperature range. The 2086581002 is actively produced and carries HDMI 2.1 specification support, providing forward compatibility for applications requiring enhanced bandwidth. Mating cycle rating of 10000 cycles is specified for the 2086581002, compared to unspecified cycles for the original part. Shell material differs (brass versus copper alloy), but both materials provide equivalent electromagnetic shielding performance in this connector class.

TE Connectivity 1-1747981-1 serves as an alternative substitute with the same 19-position HDMI receptacle configuration and solder termination. This part adds panel mount capability in addition to surface mount and through-hole options, providing greater application flexibility. The operating temperature range is narrower (-25°C to 70°C maximum, versus -20°C to 85°C for the original), which may limit suitability for applications requiring the full original temperature envelope. Voltage rating is specified as 40V AC rather than DC. Shielding specification is not provided for this part. The part is actively produced and ROHS3 compliant.

Selection between these substitutes depends on application-specific requirements: choose the Molex 2086581002 for direct replacement with identical thermal and electrical specifications; select the TE Connectivity 1-1747981-1 when panel mount capability is required and operating temperature does not exceed 70°C maximum.

Frequently Asked Questions (FAQ)

Q: Can the 2086581002 be used as a direct replacement for the 0471511002?

A: Yes. Both parts share identical mounting configurations (surface mount, right angle, through hole), the same 19-position HDMI receptacle design, solder termination, and operating temperature range (-20°C to 85°C). The 2086581002 is actively produced and ROHS3 compliant.

Q: What is the primary difference between the Molex 2086581002 and the original 0471511002?

A: The 2086581002 supports HDMI 2.1 specification and specifies 10000 mating cycles, whereas the original part does not document these parameters. Shell material differs (brass versus copper alloy), but both provide equivalent shielding. The 2086581002 is in active production status.

Q: Is the TE Connectivity 1-1747981-1 suitable for all applications using the 0471511002?

A: The TE Connectivity part is suitable for applications where the operating temperature does not exceed 70°C maximum. The original part operates to 85°C maximum. Additionally, the TE part specifies 40V AC rating versus 40V DC for the original. Verify application requirements before selection.

Q: Does the TE Connectivity 1-1747981-1 provide panel mount capability?

A: Yes. The 1-1747981-1 supports panel mount in addition to surface mount and through-hole configurations, providing greater mounting flexibility compared to the original 0471511002.

Q: Are all three parts ROHS3 compliant?

A: Yes. The original 0471511002 and both substitute parts (2086581002 and 1-1747981-1) are ROHS3 compliant with MSL rating of 1 (unlimited moisture sensitivity level).

Q: What is the difference in shell material between the substitutes?

A: The Molex 2086581002 uses brass shell material, while the original 0471511002 and TE Connectivity 1-1747981-1 use copper alloy. Both materials provide equivalent electromagnetic shielding performance for HDMI connector applications.

Q: Are mating cycle ratings specified for all parts?

A: Mating cycles are not specified for the original 0471511002. Both substitute parts specify 10000 mating cycles, indicating improved durability documentation for production parts.