Molex 0467652021 HDMI Micro Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0467652021 is a Micro HDMI receptacle connector with 19 positions, designed for surface mount and through-hole applications with right-angle orientation. This connector is classified as obsolete, necessitating identification of active equivalent parts for new designs and production continuity. The part features gold-plated contacts, shielded construction, and UL94 V-0 flammability rating suitable for consumer and industrial HDMI applications.

Substiute Parts

0467652021

MolexIn Stock: 10290467652021 Datasheet

Current PartRFQ

0467651001

MolexIn Stock: 103600467651001 Datasheet

Parametric EquivalentRFQ

0467651301

MolexIn Stock: 223150467651301 Datasheet

Parametric EquivalentRFQ

0467652301

MolexIn Stock: 107190467652301 Datasheet

Parametric EquivalentRFQ

10118241-001RLF

Amphenol ICC (FCI)In Stock: 1906710118241-001RLF Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict parametric equivalence across the following critical parameters: connector type (HDMI - Micro), contact count (19 positions), gender (receptacle), mounting configuration (surface mount with right-angle orientation), termination method (solder), and material specifications (gold contact finish, stainless steel shielding, UL94 V-0 rating).

The substitute parts are grouped into two categories:

Parametric Equivalents (Molex Series 46765): Parts 0467651001, 0467651301, and 0467652301 maintain identical electrical and mechanical specifications to the main part, with active product status and improved availability. These parts are direct functional replacements within the same manufacturer series.

Manufacturer-Recommended Cross-Reference (Amphenol ICC): Part 10118241-001RLF is designated as a manufacturer-recommended alternative from a different supplier. This part matches the core connector type, contact configuration, and mounting requirements but exhibits variations in current rating (0.3A vs. 0.8A), voltage rating (40VDC vs. 30V), operating temperature upper limit (80°C vs. 85°C), and shielding specification.

Parameter Comparison

Engineering Selection Recommendations

For applications requiring direct functional replacement of the obsolete Molex 0467652021, the parametric equivalents 0467651001, 0467651301, and 0467652301 are the primary selection candidates. These parts maintain identical electrical specifications (0.8A current rating, 30V voltage rating, -30°C to 85°C operating range) and mechanical configuration. All three are active products with ROHS3 compliance and superior inventory availability. Selection among these three Molex alternatives may be based on packaging preference (all supplied in Tape & Reel format) and inventory lead times.

The Amphenol ICC part 10118241-001RLF is suitable only for applications where the reduced current rating (0.3A maximum) and lower operating temperature ceiling (80°C) are acceptable. This cross-reference introduces parametric deviations that may not satisfy all legacy design requirements. The higher voltage rating (40VDC) provides margin in voltage-constrained applications but does not compensate for the current limitation. REACH compliance status differs between suppliers and must be evaluated against supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC part 10118241-001RLF be used as a direct replacement for the Molex 0467652021?

A: The Amphenol ICC part is mechanically and functionally compatible for HDMI Micro connector applications but exhibits reduced current capacity (0.3A vs. 0.8A) and a lower maximum operating temperature (80°C vs. 85°C). Substitution is valid only if the application current draw does not exceed 0.3A and the thermal environment remains below 80°C.

Q: What is the difference between the three Molex substitute parts (0467651001, 0467651301, 0467652301)?

A: All three Molex parts are parametrically identical in electrical and mechanical specifications. The primary differences are inventory levels and packaging format. Part 0467651301 offers the highest current inventory (22213 units). All are supplied in Tape & Reel packaging suitable for automated assembly.

Q: Why is the main part 0467652021 classified as obsolete?

A: Obsolescence status indicates the part is no longer in active production. The substitute parts listed represent the current active alternatives within the same product series and from qualified cross-reference manufacturers.

Q: Are all substitute parts RoHS compliant?

A: Yes. The Molex substitutes (0467651001, 0467651301, 0467652301) are ROHS3 compliant. The Amphenol ICC part 10118241-001RLF is RoHS compliant. Both compliance levels satisfy current regulatory requirements for electronic components.

Q: What is the significance of the Solder Retention feature listed for some parts?

A: Solder Retention is a mechanical feature that prevents solder from flowing into the connector cavity during wave soldering or reflow processes. Parts 0467652021 and 0467652301 include this feature; parts 0467651001 and 0467651301 do not list this feature. For applications using wave soldering, the Solder Retention feature may provide additional process robustness.