Molex 0467652011 HDMI Micro Receptacle Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0467652011 is a Micro HDMI receptacle connector with 19 positions, designed for surface mount and through-hole applications with right-angle orientation. This connector is classified as obsolete, necessitating identification of active equivalent alternatives for ongoing design support and procurement. The part features shielded construction, gold-plated contacts, and solder retention for reliable signal integrity in HDMI applications.

Substiute Parts

0467652011

MolexIn Stock: 7270467652011 Datasheet

Current PartRFQ

10118241-001RLF

Amphenol ICC (FCI)In Stock: 1906710118241-001RLF Datasheet

MFR RecommendedRFQ

0467651001

MolexIn Stock: 103600467651001 Datasheet

Parametric EquivalentRFQ

0467651301

MolexIn Stock: 223150467651301 Datasheet

Parametric EquivalentRFQ

0467652301

MolexIn Stock: 107190467652301 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the Molex 0467652011 are classified based on strict parametric equivalence across the following critical criteria:

Parametric Equivalents (Molex Series 46765): Parts 0467651001, 0467651301, and 0467652301 maintain identical electrical and mechanical specifications to the main part, including 19-position Micro HDMI receptacle configuration, 0.8A current rating, 30V voltage rating, -30°C to 85°C operating temperature, 5000 mating cycles, shielded construction, and ROHS3 compliance. These parts differ only in packaging format (Tape & Reel) and product status (Active), making them direct functional replacements.

Cross-Manufacturer Equivalent (Amphenol ICC/FCI): Part 10118241-001RLF provides functional equivalence as a 19-position Micro HDMI receptacle with surface mount and through-hole capability, horizontal mounting, solder termination, and UL94 V-0 flammability rating. However, this part operates within a reduced temperature range (-30°C to 80°C), lower current rating (0.3A versus 0.8A), and higher voltage rating (40VDC versus 30V). Shielding specification is not provided for this part.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitutes (Molex 46765 Series): Parts 0467651001, 0467651301, and 0467652301 are recommended as direct replacements for the obsolete 0467652011. These parts maintain full parametric equivalence, including identical electrical ratings, temperature range, and mechanical specifications. All three are active products with ROHS3 compliance and unlimited moisture sensitivity rating. Selection among these three parts should be based on packaging availability and inventory requirements, as they are functionally identical.

Cross-Manufacturer Alternative (Amphenol ICC/FCI 10118241-001RLF): This part is suitable for applications where the reduced current rating (0.3A) and narrower upper temperature limit (80°C) are acceptable. The higher voltage rating (40VDC) provides additional margin in voltage-constrained applications. This part is classified as MFR Recommended and carries RoHS compliance with REACH Affected status. Use this part only when Molex 46765 series alternatives are unavailable and application requirements align with the reduced electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can the Amphenol ICC part 10118241-001RLF directly replace the Molex 0467652011?

A: Functional replacement is possible if your application operates within the Amphenol part's electrical limits: maximum 0.3A current (versus 0.8A for the Molex part) and maximum operating temperature of 80°C (versus 85°C for the Molex part). The higher voltage rating (40VDC) is not a limiting factor. Shielding specification is not provided for the Amphenol part; confirm shielding requirements with the manufacturer if EMI performance is critical.

Q: What is the difference between parts 0467651001, 0467651301, and 0467652301?

A: These three Molex parts are parametrically identical in all electrical and mechanical specifications. The primary differences are packaging format (all are Tape & Reel) and inventory availability. Selection should be based on procurement requirements and stock levels.

Q: Why is the main part 0467652011 classified as obsolete?

A: The 0467652011 is obsolete and no longer in active production. The active Molex alternatives (0467651001, 0467651301, 0467652301) provide equivalent functionality and are recommended for new designs and ongoing procurement.

Q: Are all substitute parts RoHS compliant?

A: Yes. The Molex alternatives (0467651001, 0467651301, 0467652301) are ROHS3 Compliant. The Amphenol ICC part (10118241-001RLF) is RoHS Compliant and REACH Affected.

Q: What is the MSL rating, and does it affect part selection?

A: All listed parts carry MSL Rating 1 (Unlimited), indicating no moisture sensitivity restrictions. These parts can be stored and handled without special moisture control measures.

Q: Can these connectors be used in both surface mount and through-hole applications?

A: Yes. All listed parts support both Surface Mount and Through Hole mounting with horizontal orientation and right-angle configuration.