Molex 0462071010 Rectangular Connector - Equivalent & Substitute Parts

Part Overview

The Molex 0462071010 is an active-status rectangular connector header designed for through-hole mounting applications. This shrouded, 10-position connector with 4.2mm pitch serves general purpose, industrial, and telecommunications applications. Substitute parts are identified to provide alternative sourcing options while maintaining functional and mechanical compatibility for board-to-cable/wire interconnection.

Substiute Parts

0462071010

MolexIn Stock: 9310462071010 Datasheet

Current PartRFQ

1-1586040-0

TE Connectivity AMP ConnectorsIn Stock: 9521-1586040-0 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the Molex 0462071010 is determined by strict alignment of the following critical parameters:

• Connector type: Header
• Contact type: Male Pin
• Number of positions: 10
• Number of rows: 2
• Pitch - mating: 0.165" (4.20mm)
• Row spacing - mating: 0.165" (4.20mm)
• Mounting type: Through Hole
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Contact shape: Square
• Material flammability rating: UL94 V-0
• RoHS status: ROHS3 Compliant
• Moisture sensitivity level: 1 (Unlimited)

The TE Connectivity AMP Connectors part number 1-1586040-0 meets all critical substitution criteria and is classified as a manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the Molex 0462071010 and TE Connectivity 1-1586040-0 maintain active product status and comply with ROHS3 and UL94 V-0 flammability requirements. Selection between these parts should be based on availability, lead time, and cost considerations, as both meet the specified electrical and mechanical requirements for rectangular connector header applications in general purpose, industrial, and telecommunications environments.

Frequently Asked Questions (FAQ)

Q: What makes the TE Connectivity 1-1586040-0 a valid substitute for the Molex 0462071010?

A: Both connectors share identical critical parameters: 10-position, 2-row configuration with 0.165" (4.20mm) pitch, shrouded 4-wall design, through-hole solder termination, square contact shape, and UL94 V-0 flammability rating. Both are ROHS3 compliant with MSL 1 rating.

Q: Are there dimensional differences between these connectors?

A: Yes. The contact length post differs (Molex: 0.144" vs. TE: 0.138") and insulation height differs (Molex: 0.535" vs. TE: 0.504"). These variations may affect board layout and mating depth. Verify PCB design compatibility before substitution.

Q: Do the insulation materials differ?

A: Yes. The Molex uses Liquid Crystal Polymer (LCP) glass-filled material, while the TE Connectivity uses Polyamide (PA) nylon. Both meet UL94 V-0 requirements. Material selection should align with application environmental conditions.

Q: Are both parts suitable for the same applications?

A: Both connectors are rated for general purpose, industrial, and telecommunications applications. The TE Connectivity part specifies operating temperature range (-40°C ~ 105°C) and current/voltage ratings (9A, 600VAC), which should be verified against your specific application requirements.

Q: What is the packaging format for these connectors?

A: Both parts are supplied in tray packaging format, suitable for automated assembly and component handling.