Molex 0441500014 Equivalent & Substitute Parts

Part Overview

The Molex 0441500014 is a jack modular connector for 8p8c (RJ45, Ethernet) applications with 90° right-angle orientation, shielded design with EMI finger, and through-hole solder termination. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement.

Substiute Parts

0441500014

MolexIn Stock: 11320441500014 Datasheet

Current PartRFQ

0441500008

MolexIn Stock: 8340441500008 Datasheet

MFR RecommendedRFQ

5558505-1

TE Connectivity AMP ConnectorsIn Stock: 9595558505-1 Datasheet

MFR RecommendedRFQ

6339169-3

TE Connectivity AMP ConnectorsIn Stock: 22406339169-3 Datasheet

MFR RecommendedRFQ

95672-308-00

Amphenol ICC (FCI)In Stock: 118895672-308-00 Datasheet

MFR RecommendedRFQ

95672-508-00

Amphenol ICC (FCI)In Stock: 91895672-508-00 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict alignment with the following core parameters:

• Connector Type: Jack
• Number of Positions/Contacts: 8p8c (RJ45, Ethernet)
• Orientation: 90° Angle (Right)
• Mounting Type: Through Hole
• Termination: Solder
• Shielding: Shielded
• Ratings: Cat5
• Contact Material: Phosphor Bronze
• Contact Finish: Gold

All substitute parts listed meet these criteria. Variations in housing material, features (Board Lock vs. Board Guide), EMI finger presence, and RoHS compliance status are noted but do not disqualify substitution eligibility based on the electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Recommendation: Molex 0441500008

The Molex 0441500008 is the direct successor to the obsolete 0441500014. Both parts share identical electrical and mechanical specifications, including operating temperature range (-40°C ~ 85°C), contact finish thickness (50.0µin / 1.27µm), EMI finger shielding, and ROHS3 compliance. The 0441500008 is actively manufactured and available in tray packaging.

Secondary Recommendations: TE Connectivity 6339169-3

The TE Connectivity 6339169-3 maintains full compatibility across all critical parameters: 8p8c RJ45 configuration, 90° right-angle orientation, through-hole solder termination, phosphor bronze contacts with gold finish, and Cat5 rating. This part includes EMI finger shielding and operates across the full -40°C ~ 85°C temperature range. ROHS3 compliance is confirmed. Higher inventory availability (2200 pcs) supports procurement continuity.

Alternative Options: TE Connectivity 5558505-1

The TE Connectivity 5558505-1 provides full electrical and mechanical compatibility. The primary distinction is the absence of EMI finger shielding; shielding is present but without the EMI finger feature. This part maintains the full operating temperature range and ROHS3 compliance. Selection depends on whether EMI finger presence is a design requirement.

Limited Compatibility: Amphenol ICC 95672-308-00 and 95672-508-00

Both Amphenol ICC parts (95672-308-00 and 95672-508-00) meet the core connector interface requirements but present two constraints:

1. Operating temperature range is reduced to -40°C ~ 70°C, which is 15°C below the original specification.
2. RoHS compliance status is non-compliant, whereas the original part is ROHS3 compliant.

These parts are suitable only for applications where the reduced temperature range and RoHS non-compliance status are acceptable. The 95672-508-00 variant includes gold contact finish with GXT™ specification and Board Lock feature.

Frequently Asked Questions (FAQ)

Q: Can the Molex 0441500008 be used as a direct replacement for the 0441500014?

A: Yes. The 0441500008 is the active production equivalent. Both parts share identical specifications for connector type, pin configuration, orientation, termination method, shielding with EMI finger, operating temperature range, and RoHS compliance status. The only difference is product status: 0441500014 is obsolete while 0441500008 is actively manufactured.

Q: What is the difference between parts with and without EMI finger shielding?

A: EMI finger shielding provides enhanced electromagnetic interference rejection through additional contact fingers on the shield. The TE Connectivity 5558505-1 includes shielding but lacks the EMI finger feature. Selection between EMI finger and standard shielding depends on application-level EMI requirements and design specifications.

Q: Why do the Amphenol ICC parts have a reduced operating temperature range?

A: The Amphenol ICC 95672-308-00 and 95672-508-00 are specified for -40°C ~ 70°C operation, which is 15°C below the original 0441500014 specification of -40°C ~ 85°C. This is a material and design difference between manufacturers. Applications requiring the full -40°C ~ 85°C range must use Molex or TE Connectivity alternatives.

Q: Are the Amphenol ICC parts suitable for new designs?

A: The Amphenol ICC parts meet the core 8p8c RJ45 connector interface requirements. However, they are RoHS non-compliant, whereas the original part is ROHS3 compliant. New designs subject to RoHS regulations should use Molex 0441500008, TE Connectivity 6339169-3, or TE Connectivity 5558505-1. Existing designs with established RoHS exemptions may use Amphenol ICC parts if the reduced operating temperature range is acceptable.

Q: What packaging options are available?

A: Molex 0441500008 is supplied in tray packaging. TE Connectivity parts (5558505-1 and 6339169-3) are supplied in tray packaging. Amphenol ICC parts (95672-308-00 and 95672-508-00) are supplied in tube packaging. Packaging selection may affect handling, storage, and assembly processes.

Q: Can I mix different manufacturers' connectors in the same assembly?

A: All listed parts are mechanically and electrically compatible at the interface level. However, design consistency and supply chain management typically favor single-manufacturer selections within a product line. If multiple manufacturers are used, ensure that all parts meet the application's temperature, compliance, and shielding requirements.