Equivalent & Substitute Parts: 0415CDMCCDS-2R2MC

Part Overview

The 0415CDMCCDS-2R2MC is a 2.2 µH shielded molded inductor manufactured by Sumida America Components Inc., designed for surface mount applications requiring moderate current handling and low DC resistance. This part is classified as Active product status and is available in Tape & Reel packaging with 3585 pieces in current inventory.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter tolerances while maintaining compatibility with the application's mechanical and thermal requirements.

Substiute Parts

0415CDMCCDS-2R2MC

Sumida America Components Inc.In Stock: 36560415CDMCCDS-2R2MC Datasheet

Current PartRFQ

IHLP1616BZER2R2M11

Vishay DaleIn Stock: 15831IHLP1616BZER2R2M11 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the 0415CDMCCDS-2R2MC is determined by the following critical parameters:

Inductance Value: Must be 2.2 µH with ±20% tolerance to maintain circuit performance.

Current Rating: Substitute parts must support a minimum of 3.3 A continuous current. Parts with equal or higher current ratings are acceptable.

DC Resistance: Substitute parts must not exceed 78 mOhm maximum to ensure thermal and efficiency specifications are met.

Shielding: Both the main part and substitute must be shielded to prevent electromagnetic interference in the application.

Operating Temperature Range: Substitute parts must support the full -55°C to 125°C operating window.

Mounting Type: Both parts must be surface mount compatible.

Moisture Sensitivity Level: Substitute parts must maintain MSL 1 classification or equivalent.

The IHLP1616BZER2R2M11 from Vishay Dale meets these substitution criteria with equivalent inductance, compatible current handling, lower DC resistance, and identical operating temperature specifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part (0415CDMCCDS-2R2MC): Active product status with established supply chain. Recommended for new designs when inventory availability is confirmed. Tape & Reel packaging supports automated assembly processes.

Substitute Part (IHLP1616BZER2R2M11): Active product status with higher inventory availability (15778 pieces). Offers improved DC resistance performance (68 mOhm vs. 78 mOhm), resulting in lower power dissipation. RoHS3 compliant and REACH unaffected status provides regulatory alignment. Current rating of 3.25 A is acceptable for applications designed for 3.3 A operation with appropriate thermal margin analysis.

Height Consideration: The substitute part has a maximum seated height of 2.00mm compared to 1.50mm for the primary part. PCB layout clearance must be verified before substitution in space-constrained applications.

Both parts are classified as Active and carry identical ECCN and HTSUS codes, confirming regulatory equivalence.

Frequently Asked Questions (FAQ)

Q: Can the IHLP1616BZER2R2M11 be used as a direct replacement for the 0415CDMCCDS-2R2MC?

A: Yes, within the specified electrical and mechanical parameters. The substitute part maintains equivalent inductance, shielding, operating temperature range, and moisture sensitivity. The 3.25 A current rating is acceptable for circuits designed for 3.3 A operation. PCB height clearance must be verified due to the 0.50mm increase in seated height.

Q: What is the impact of the lower DC resistance in the substitute part?

A: The IHLP1616BZER2R2M11 has 68 mOhm maximum DCR compared to 78 mOhm in the primary part. This 10 mOhm reduction decreases resistive power loss, resulting in lower operating temperature and improved efficiency. This is a performance advantage with no negative impact on circuit function.

Q: Are there packaging differences between these parts?

A: The primary part is supplied in Tape & Reel (TR) packaging. The substitute is available in Cut Tape (CT) & Digi-Reel® packaging. Both formats support automated assembly; however, reel specifications and handling procedures may differ. Verify compatibility with your assembly equipment.

Q: What is the significance of the frequency-self-resonant specification?

A: The substitute part specifies a self-resonant frequency of 40 MHz. The primary part does not provide this specification in the available data. For applications operating near or above 40 MHz, the substitute part's resonant characteristics must be evaluated against circuit requirements.

Q: Do both parts meet the same compliance standards?

A: Both parts carry identical ECCN (EAR99) and HTSUS (8504.50.4000) classifications. The substitute part is explicitly RoHS3 compliant and REACH unaffected. Compliance status for the primary part should be confirmed with the manufacturer if required for your application.

Q: What is the tolerance range for inductance in both parts?

A: Both parts specify ±20% inductance tolerance at 100 kHz test frequency. This means the actual inductance value can range from 1.76 µH to 2.64 µH. Circuit designs must account for this tolerance band.