0402YA131JAT2A Equivalent & Substitute Parts

Part Overview

The 0402YA131JAT2A is a 130 pF ceramic capacitor manufactured by KYOCERA AVX, rated for 16V operation with C0G/NP0 temperature coefficient in 0402 (1005 Metric) surface mount package. This part is actively produced and widely used in general-purpose applications requiring stable capacitance across temperature ranges from -55°C to 125°C. Substitute parts are identified for applications requiring higher voltage ratings or alternative manufacturer sourcing while maintaining identical capacitance, tolerance, package, and temperature characteristics.

Key Parameters

Parameter	Value
Capacitance	130 pF
Tolerance	±5%
Voltage Rating	16V
Temperature Coefficient	C0G, NP0
Operating Temperature Range	-55°C to 125°C
Package / Case	0402 (1005 Metric)
Mounting Type	Surface Mount, MLCC
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute parts for the 0402YA131JAT2A are qualified based on the following criteria:

Capacitance: Must be 130 pF (exact match)
Tolerance: ±5% or tighter (±2% acceptable)
Temperature Coefficient: C0G/NP0 (mandatory for stability)
Operating Temperature Range: -55°C to 125°C (minimum requirement)
Package / Case: 0402 (1005 Metric) (exact match)
Mounting Type: Surface Mount, MLCC (exact match)
RoHS & Compliance: ROHS3 Compliant, REACH Unaffected

Voltage rating substitution is permitted when the substitute part maintains equal or higher voltage rating than the original 16V specification, provided all other electrical and mechanical parameters remain within acceptable tolerances.

Parameter Comparison

Part Number	Manufacturer	Capacitance	Tolerance	Voltage Rating	Temperature Coefficient	Package	Product Status	Inventory (Pcs)
0402YA131JAT2A	KYOCERA AVX	130 pF	±5%	16V	C0G, NP0	0402 (1005 Metric)	Active	923
04025A131JAT2A	KYOCERA AVX	130 pF	±5%	50V	C0G, NP0	0402 (1005 Metric)	Active	9,298
C0402C131J5GAC7867	KEMET	130 pF	±5%	50V	C0G, NP0	0402 (1005 Metric)	Active	38,894
GRM1555C1H131GA01D	Murata Electronics	130 pF	±2%	50V	C0G, NP0	0402 (1005 Metric)	Not For New Designs	47,397
GRM1555C1H131JA01D	Murata Electronics	130 pF	±5%	50V	C0G, NP0	0402 (1005 Metric)	Not For New Designs	98,621

Engineering Selection Recommendations

Primary Substitute (Active Production): The 04025A131JAT2A from KYOCERA AVX is the direct equivalent with identical manufacturer lineage, tolerance, and package specifications. The sole difference is the elevated 50V voltage rating, which provides additional design margin without affecting circuit performance in 16V applications. This part maintains Active product status and ROHS3 compliance.

Alternative Substitutes (Active Production): The C0402C131J5GAC7867 from KEMET provides equivalent electrical performance with tighter ±2% tolerance and 50V rating. This part is actively produced with substantial inventory availability.

Legacy Alternatives (Not For New Designs): The GRM1555C1H131GA01D and GRM1555C1H131JA01D from Murata Electronics are functionally equivalent but designated as Not For New Designs. These parts remain available for legacy system support and maintenance applications only.

Frequently Asked Questions (FAQ)

Q: Can I use a 50V-rated substitute in place of the 16V-rated 0402YA131JAT2A? A: Yes. A higher voltage rating does not degrade performance in lower-voltage applications. The 50V substitutes (04025A131JAT2A, C0402C131J5GAC7867, GRM1555C1H131GA01D, GRM1555C1H131JA01D) are electrically compatible with 16V circuit designs.

Q: What is the difference between ±5% and ±2% tolerance? A: Both tolerances are acceptable substitutes. The ±2% tolerance (GRM1555C1H131GA01D) provides tighter capacitance accuracy. Selection depends on circuit requirements for capacitance precision.

Q: Are Murata parts marked "Not For New Designs" still usable? A: Yes, for existing production and maintenance. These parts are suitable for legacy system support but should not be selected for new product designs due to their discontinued status.

Q: Is the 0402 package identical across all substitute parts? A: Yes. All substitute parts use the 0402 (1005 Metric) surface mount package with identical footprint and mounting requirements. Thickness specifications range from 0.55mm to 0.56mm, which is within standard PCB assembly tolerances.

Q: Do all substitutes maintain the same temperature stability? A: Yes. All substitute parts feature C0G/NP0 temperature coefficient with -55°C to 125°C operating range, ensuring identical thermal performance across the specified temperature band.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message