04023J4R3ABSTR Equivalent & Substitute Parts

Part Overview

The 04023J4R3ABSTR is a thin film capacitor manufactured by KYOCERA AVX in active product status. This component is specified for applications requiring precise capacitance values with low loss characteristics. Identifying equivalent and substitute parts is necessary when original inventory is unavailable, when packaging format changes are required, or when supply chain optimization is needed while maintaining electrical and mechanical compatibility.

Substiute Parts

04023J4R3ABSTR

KYOCERA AVXIn Stock: 96504023J4R3ABSTR Datasheet

Current PartRFQ

04023J4R3BBSTR

KYOCERA AVXIn Stock: 997004023J4R3BBSTR Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The substitute part 04023J4R3BBSTR is classified as an equivalent based on the following electrical and mechanical criteria:

Matching Parameters:

• Capacitance value: 4.3 pF
• Voltage rating: 25 V
• Dielectric type: Thin film
• Mounting type: Surface mount
• Package designation: 0402 (1005 Metric)
• RoHS compliance: ROHS3 Compliant
• Moisture sensitivity: 1 (Unlimited)
• REACH status: REACH Unaffected
• Manufacturer: KYOCERA AVX

Permitted Variation:

• Packaging format: Tape & Reel (TR) vs. Cut Tape (CT) & Digi-Reel® (different supply configurations, same component)
• Series designation: ACCU-F/P vs. Accu-P® (both KYOCERA AVX thin film product lines)

Parameter Comparison

Engineering Selection Recommendations

Both 04023J4R3ABSTR and 04023J4R3BBSTR are active, ROHS3 compliant components from KYOCERA AVX with identical regulatory status (REACH Unaffected, ECCN EAR99). Selection between these parts is determined solely by packaging requirements:

• 04023J4R3ABSTR: Select when Tape & Reel (TR) packaging is specified for automated assembly with reel-based feeding systems.
• 04023J4R3BBSTR: Select when Cut Tape (CT) or Digi-Reel® packaging is required for manual assembly, small-quantity pick-and-place operations, or existing inventory systems optimized for these packaging formats.

Both parts satisfy equivalent component status for direct substitution where packaging constraints permit.

Frequently Asked Questions (FAQ)

Q: Are these parts electrically identical? A: Yes. Both parts have the same capacitance value (4.3 pF) and voltage rating (25 V), and are manufactured using identical thin film dielectric technology by KYOCERA AVX.

Q: What is the primary difference between these two part numbers? A: The primary difference is packaging format. 04023J4R3ABSTR is supplied in Tape & Reel (TR) format, while 04023J4R3BBSTR is supplied in Cut Tape (CT) and Digi-Reel® formats. The actual component specifications are equivalent.

Q: Can I use 04023J4R3BBSTR as a direct replacement for 04023J4R3ABSTR on a PCB assembly? A: Yes, provided your assembly equipment can accommodate the packaging format. The physical dimensions (0402 / 1005 Metric package, 0.020" maximum seated height) and soldering characteristics are identical.

Q: Are both parts RoHS compliant? A: Yes. Both 04023J4R3ABSTR and 04023J4R3BBSTR are ROHS3 Compliant with MSL 1 (Unlimited) rating, making them suitable for standard surface mount assembly processes without moisture baking requirements.

Q: Which part should I specify in my design documentation? A: Specify 04023J4R3ABSTR if your manufacturing process uses tape-fed reel systems. Specify 04023J4R3BBSTR if your process uses cut tape or Digi-Reel® format. Either specification is valid for the circuit function, as the electrical performance is identical.

Q: Is the Accu-P® series equivalent to the ACCU-F/P series? A: Both designations refer to KYOCERA AVX thin film capacitor product lines. The specific part numbers provided (04023J4R3ABSTR and 04023J4R3BBSTR) are direct functional equivalents regardless of series designation differences.